Top Off camera Flash Mount Reviews

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..

Check Stock

YONGNUO Wireless Shutter Release & Flash Trigger RF-603II N3 for Nikon DSLR D90 D600 D7100 D7000 D5100 D5000 D3100 D3000

Wireless Remote Shutter Release ( On camera )--- You can mount one receiver into the camera and connect it with the camera via the 2.5mm shutter connecting cable, and can remote control the camera with other receiver. You can use it to fulfill the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing and Bulb..
Remote Shutter Release ( off Camera )--- You can use the single receiver to fulfill the function of remote shutter release after you connect it with your camera via the 2.5mm cable.
To fire the Flash Speedlite --- one receiver can fire one flash speedlite, one set of RF-603 can control 2pcs Flash Speedlite at the same time..
The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed)..
Adding the Locking rings. Improved Flash / Shutter control Buttons. Working for more non Canon/Nikon cameras and single firing pin cameras..

Check Stock

Vello CB-600 Straight Flash Bracket

【2 Pack Dual Flash Bracket】 with 1/4 standard screw to mount on dslr camera, led light, flash light and more. Perfect for your different demand on shooting..
【Adjustable Flash extension bar】 Adjustable range from 4-18cm. Allowing to attach two devices at the same time. Please check the max adjustable range for your camera or accessories before order..
【1/4’’ and 3/8’’ Thread】 Dual camera mount for tripod comes with 1/4’’ and 3/8’’ thread holes at the center for tripod, light stand, handle grip, quick release plate and other support..
【No-slip Rubber Pad】Dual hot shoe mount 1/4’’ screw with anti-slip rubber pad. Can protect your camera flash and led light from scratches and slipping..
【High Quality】Made of aluminum material, very sturdy and durable. Dimensions: 20.3cm*2.8cm*0.5cm. Weight: 72g..

Check Stock

YONGNUO Wireless Shutter Release & Flash Trigger RF-603II C3 for Canon DSLR 1D /1DS, EOS 5D Mark II/5D /7D/50D /40D /30D /20D /10D

【Compatible with】 Canon 1D, 1DS, 1DX, EOS 5D Mark II III, 6D, 5D, 7D, 50D, 40D, 30D, 20D, 10D.
【Wireless Remote Shutter Release (On camera)】 You can mount one RF603 II receiver into the camera and connect it with the camera via the 2.5mm shutter connecting cable, and can remote control the camera with other receiver..
【Remote Shutter Release (Off Camera)】 You can use the single receiver to fulfill the function of remote shutter release after you connect it with your camera via the 2.5mm cable.
【To fire the Flash Speedlite】 One RF603II receiver can fire one flash speedlite, one set of RF-603II can control 2pcs Flash Speedlite at the same time..
【Higher sync speed than the first generation】 The highest flash sync speed up to 1/320 second (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieved difference flash sync speed)..

Check Stock

Dual Flash Bracket,Chromlives Dual Tripod Mount Bracket,1/4\ Dual Camera Mount Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Light,DSLR Camera,Tripod,Flash Light(2 Pack)

Smoothly Flips Camera 90 Degrees * Eliminates Red-Eye & Side Shadows * Compact Form Factor.
Compatible with Most Cameras & Flashes * Multiple Mounting Holes for Accessories * Adjustable Cold Shoe.
Bottom 1/4"-20 Mount for Using Tripod * Comfortable, Soft Hand-Grip * TTL Cord for Canon Cameras.
Kit Includes:Speedy Camera Rotating Flash Bracket, Off-Camera TTL Flash Cord for Canon Cameras (1.5').

Check Stock

Neewer 4.2 /1.3m TTL Off Camera Flash Speedlite Cord compatible with Canon DSLR 800D/750D/700D/650D/600D/7D2/7D/6D2/6D/5D4/5D3/5D2/5DS/1D4/1D3/100D/80D/70D/60D Cameras

Features a shoe mount on the bottom of the flash connection shoe, as well as a 1/4"-20 socket.
Features a built-in tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod & frees your hand from holding the off-camera flash.
Total dedication between digital or film camera & flash using ISO shoe connection.
Helps to achieve off-camera flash photography results without the harsh shadows behind your objects common when using direct flash exposures.

Check Stock

2 Pack JJC FA-SHC1M Hot Shoe Cover Cap for Sony A6000 A6100 A6300 A6400 A6500 A6600 A7 A7 II A7 III A7R IV A7R III A7R II A7R A7S A7S II A9 A99 II A77 II RX1 RX1R II RX10 IV III and More Sony Camera

SHOE MOUNT WITH 1/4"-20 SOCKET - Features a built-in 1/4"-20 tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod or flash shoe mount, frees your hand from holding the off-camera flash..
SAFETY & FLEXIBLE LENGTH - Feature a locking knob on the two ends of the TTL cable to ensure your equipment is secure. Uncoiled lenght: 50cm/1.6ft, coiled length: 11cm/4.3inch..
TTL CABLE WITH SHOE MOUNT & 1/4"-20 SOCKET - Features a built-in 1/4"-20 tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod or flash shoe mount, frees your hand from holding the off-camera flash..
COMPATIBILITY - TTL Cable Compatible with Sony Camera and speedlites with Multi Interface MI Shoe, Compatible with Sony ZV1, A7R IV, A7C, A7 III, A7R III, A7S III, A7S II, A7 II, A7R II, A7, A7R, A7S, A7SM2, A7RM2, A7M3, A7RM2, A7RM3, A9, A9 II, A99 II, A77 II, A6600, A6100, A6000, A6500, A6400, A6300, and more. Five mounting holes on the camera platform allow for almost any camera to utilize the bracket..
CAMERA COMPATIBILITY - Compatible with Sony Camera with Multi Interface Shoe, such as Sony Alpha 7R IV, 7RIV, a1, a7IV, a7R IV, A9, A7, A7R, A7S, A7SII, A7SIII, A7II, A7III....

Check Stock

ChromLives 1/4'' Dual Camera Mount Flash Bracket Extension Bar 10.6'' Straight Flash Bracket Tripod Mount Bracket for DSLR Camera LED Light Flash Light Microphone and More

Dual Camera Mount with 1/4" standard screw hole to mount on tripod..
The straight flash bracket is with dual 1/4" Screws to support two cameras,flash units or mics at the same time..
Dimensions: 10.6 x 1.2 x 0.2 inches (LXWXH), Max Loading Capacity: 6.6LB (3kg)..
Adjustable Range: From 3.7 to 9.3 inches.Long enough to hold two LED light at the same time. (Please check the max adjustable range for your camera or accessories before order)..
This Dual Camera Flash Mount Tripod Bracket is made of ALL Metal Aluminum, affixed with non-slip rubber pads to protect your camera flash and Mics from scratches and anti-slide..

Check Stock

MOSHUSO Dual Cold Shoe Base Adapter Mount Extension Bracket for Microphone LED Light Flash

【T-Shape Mount】This cold shoe extension plate is designed for vloggers/youtubers/filmmakers to attach their microphone, led flash directly on cameras or phone holders when shooting, providing a easy and compact resolution for the attachment of shooting devices..
【Cold Shoe Adapter】At bottom, the bracket is fixed via a cold shoe adapter and is tightened via a big wheel screw. Can be used on camera, phone holder, camera cage, or other accessories with shoe mount..
【Two Cold Shoe Base】the extension plate features two shoe base at top, allows to connect the device with shoe adapter such as microphone, led flash, etc..
【Built-in Slot Bayonet】Slot width 4mm, depth 3.5mm, to prevent the data cable from loosening and falling off.
【All Metal Construction】Made of Aluminum alloy, very stable and durable.
weight only 48g / 1.69oz, easy to carry around..

Check Stock

TTL Speedlight Flash for Canon DSLR Cameras Including EOS 70D, 77D, 80D, 5D Mark Series, 6D, 6D Mark II, 7D Mark II, 1D, 1DX + TTL Cord + L-Bracket + 4 AA Rechargeable Batteries + Acces

This PagingZone Flash Kit comes All Standard Manufacturer Supplied Accessories. It includes:.
High Speed speedlight TTL flash for Canon cameras. Works perfectly with 4 AA batteries. Swinging/Tilting flash head (bounce flash)..
A TTL Cord which allows you to maintain communication with your camera's hot shoe mount without having to mount the device directly above the camera body.
A 4-Pack of Rechargable Double AA Batteries to ensure that you never run out of juice during a photo shoot and don't have to keep buying and replacing batteries.
An L Bracket so you can mount the flash onto the camera using the tripod thread for ease of use and can be tilted to achieve the perfect angle for the flash.

Check Stock

UTEBIT Flash Light Bracket 12in Upgraded Straight Speedlite Extension Mount Bar with 1/4 Screw Hot Shoe Tripod DSLR Holder for LED Light Microphone

【Size and Material】 The length of the straight flash Bracket is 30.3cm/11.8in. Compared with similar regular products, this camera bracket is longer, flash extension bracket made of aluminum alloy, sturdy and durable, with strong load-bearing capacity..
【Ingenious design】There are standard 1/4-inch and 3/8-inch screw holes in the middle of the dual flash bracket, which can be installed on a camera or a light stand..
【Easy to carry】 The size of the dual camera mount is convenient to carry, suitable for use in various occasions, and is an indispensable important equipment for photographers..
【Advantage】Compared with other similar dual camera mount that can only install one camera and one flash, our dual flash bracket can install two cameras and two flashes (or two other photography accessories) at the same time, ensure balance to meet different shooting needs..
【Application】 Flash bracket meets the needs of multi-functional expansion, suitable for dual camera shooting, or match with video lights, fill lights, microphones etc at the same time..

Check Stock

MagRing 2 Softbox Mount by MagMod | Photography Lighting MagBox Accessory | Modular Speedlite Base | New and Improved Magnetic Speedring

MODULAR LIGHT MODIFIER Designed for use with the MagMod 2 system, MagMod modifiers are modular - making custom lighting setups with a MagBox or Pro Gels super-fast and easy. Just pop in a speedlight, shut the door, and get back to shooting. With the MagRing 2, you can go from on-camera to off in a flash! Modular system lets you add as many modifiers as you like, for extreme customization of your flash setup!.
MAGMOD MAGIC The MagRing 2 is part of an entire redesign to reduce size, decrease weight, and be better optimized for new round-head flash designs without sacrificing any of MagMod's original, modifying magic. We made the MagRing 2 compatible with your existing MagMod 2 modifiers, so you can throw on a MagGrid 2, or Pro Gel without removing your flashes from the MagRing. Woo hoo!.
UNIVERSALLY AWESOME FLASH MOUNT Pop any flash that has a MagGrip, our patented universal flash mount, into the MagRing 2. Since the MagGrip 2 works with pretty much any flash, you can use virtually any speedlights you want inside your Magbox pro. And we think that’s awesome. Requires a MagGrip or MagGrip 2 (sold separately) to be used on a compatible flash..

Check Stock

Zeetain 8\/20cm Dual Speedlite Camera Mount Tripod Bracket Flash Extension Bar,8\ Dual Tripod Bracket for Camera,LED Video Light,DSLR Camera,Flash Light

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
A hole with locking screw in middle specially designed for holding umbrella..
Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Package includes 2 pcs of Flash Light Stand Bracket.

Check Stock