Top Od Turning Reviews

Micro 100 AL-6 Forming Tool - AL Style - Brazed, 1/64\ Corner Rad.365\ Width, 3/4\ Length, 3/8\ Square Shank, 2-1/2\ OAL, Uncoated

  • Designed for left hand turning and facing on the outside diameter (OD) in lathe applications.
  • Ground with side rake to provide a positive cutting action and better chip evacuation.
  • Solid carbide tipped with zinc coated hardened steel shank.
  • Available in industry standard fractional shank sizes.
Check Stock

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

DERNORD 2 Pack 1.5 Inch Tri Clamp Sanitary Butterfly Valve with Pull Handle Stainless Steel 304 Tri Clamp Clover 1.5 Tri Clamp Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA.
  • 100 Percent pressure hydraulic tested for reliability.
  • The pull style handle allows you to set the valve in three different positions simply by pulling and turning.
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

Danco 34443 Rubber Faucet O-Ring Kit, Black

  • ELIMINATES AND PREVENTS LEAKS: Faucet O-rings help eliminate faucet leaks by providing a better seal and a positive shut off.
  • ABRASION AND HEAT RESISTANT: O-rings have a high abrasive resistance and temperature resistance and will withstand heat between a temperature range of 86°F to 248°F (-30°C to 120°C).
  • ASSORTED O-RINGS OUTER DIAMETER: Includes 12 most popular sizes and Lid chart illustrates the sizes for easy identification: 3/8” OD.
  • 7/16” OD, 1/2” OD, 9/16” OD, 5/8” OD , 11/16” OD, 3/4” OD, 3/16” OD, 7/8” OD, 15/16” OD, 1-1/16” OD and 1-1/8” OD.
  • BEVELED DESIGN: allows for full water flow.
  • PROFESSIONAL & DIY HOME KIT: Pack of 200-Faucet O-ring Assortment helps not only the Plumbing Professional, but the everyday DIY'er.
  • DURABLE: O-rings are constructed of tough and pliable Buna-Nitrile Rubber (NBR) that will help provide long-term use for your plumbing needs.
Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Eastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF

  • ✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
  • ✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
  • ✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
  • ✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
  • ✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..
Check Stock

BrassCraft SC2163 Beveled Washer Assortment

  • Assortment of Beveled Faucet Washers and Bibb Screws in the Most Popular Sizes.
  • Includes (2) 3/8" x 8-32 Thread Bibb Screws, (2) 3/8" x 10-32 Thread Bibb Screws, (2) 3/8" x 10-24 Thread Bibb Screws, (2) 1/2" OD Faucet Washers ,.
  • (2) 19/32" OD Faucet Washers, (2) 5/8" OD Faucet Washers, (4) 17/32" OD Faucet Washers and (2) 9/16" OD Faucet Washers.
Check Stock

Antenna Rotator W/Remote

  • 20' 9" assembled height. Collapses to a convenient 5' for shipping and storage..
  • Bottom: 2-1/4" OD x 18 Gauge 2nd Section: 2" OD x 18 Gauge 3rd Section: 1-3/4" OD x 18 Gauge.
  • 4th Section: 1-1/2" OD x 18 Gauge Top: 1-1/4" OD x 16 Gauge (Mast is overlapped for added strength).
  • Features guy rings that rotate and a heavy duty thumbscrew/collar system for setting height.
  • All installations must be guyed or bracketed and installed by an experienced professional. Installation instructions are not included by the manufacturer..
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded carrying case for easy transportation, safe storage, and simple organization.
  • Each compartment has a sizing label for quick identification.
  • CONTENTS: Package includes (8) guides + (2) lock nuts + (1) carrying case for your convenience.
Check Stock

Easy Up 33 2 Telescoping Mast - TV WIFI HAM Antenna - EZ TM-50-U-95

  • 33' 2" assembled height. Collapses length: 95".
  • Bottom: 2-1/4" OD x 18 Gauge x 74" Long. 2nd Section: 2" OD x 18 Gauge x 80" Long. 3rd Section: 1-3/4" OD x 18 Gauge x 86" Long.
  • 4th Section: 1-1/2" OD x 18 Gauge x 92". Long Top: 1-1/4" OD x 16 Gauge x 94" Long.
  • Features guy rings that rotate and a heavy duty thumbscrew/collar system for setting height.
Check Stock

POWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer

  • INCLUDES: 4” to 2 1/2” Dust Collection Hose Reducer.
  • FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop vacuum hose branch line. The 2-1/2 in. opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners.
  • PLEASE NOTE: This cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly (which would require POWERTEC 70149 or 70148 Flex Cuffs).
  • PREMIUM: Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection.
  • DIMENSIONS: 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID.
  • 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.
Check Stock