Top Octave Effect Reviews

Gamechanger Audio Plasma Drive Eurorack Module

  • High voltage distortion is a new and previously unexplored method of achieving signal clipping. You are playing a bolt of electricity, and the electrical discharges produced by the PLASMA Tube are instantly converted back into audio signal..
  • Unique frequency response with grainy and sizzling distortion textures. Sharp and massive attacks because of the naturally occurring noise gate..
  • Wide scope if input level response. From sputtery broken sounds, to rhythmical staccato playing, all the way to rich and very long sustaining sounds..
  • 1 octave up and 1 and 2 octave down tracking oscillators. CV control over distortion and dry wet mix. Assignable pre and post effect equalizer..
  • Harmonic transparency allows to play even the most complex chords..
Check Stock

DigiTech Whammy DT Drop Tuning Guitar Pitch Shift Effect Pedal with ac power adapter , 2 Instrument cable and 2 Path cables for guitars

  • DigiTech Whammy DT Drop Tuning Pedal Guitar Pitch-Shift Effect Pedal Pitch Effects, Drop and Raised Tuning, and True Bypass Bundle`.
  • DigiTech Whammy DT Drop Tuning Guitar Pitch Shift Effect Pedal Momentary footswitch for "hammer-on" and "pull-off" effects: You can instantly create hammer-on and pull-off effects during your performance with the momentary footswitch.
  • The Whammy DT gives you the latest pitch shifting technology to retune your guitar without ever touching the tuning pegs. Step up or down in 7 half steps, or an entire octave with just one setting..
  • DigiTech Whammy DT Drop Tuning Guitar Pitch Shift Effect Pedal With all the new tuning capabilities, you still have your true pitch shifting effects to sweeten up all moments of your gig.
  • True Polyphonic Pitch Shifting and Whammy effects in a single pedal with Drop or Raised tuning by 7 half steps or an entire octave, Momentary footswitch for Hammer-on and Pull-off effects and FS3X input for hands-free selection of Whammy and Drop Tune settings guitar pedal digitech pedal guitar guitar effects digitech guitar effects pedal digitech guitar multi-effects guitars guitar digitech digitech pedal.
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

Digitech DROP Compact Polyphonic Drop Tune Pitch Shift Pedal with Momentary Latch Switching and True Bypass with Electronic Power Supply and Patch Pedal Cable

  • A polyphonic, multi-mode downward pitch-shifter guitar effect pedal.
  • Foot pedal settings 1-7 provide 1 to 7 semitones of downward pitch shifting. True-bypass switching preserves your tone when the effect is bypassed..
  • Digitech foot pedal has 2 additional settings provide octave down shifting with or without dry signal.
  • Guitar pedals Hold/Tap switch lets you select momentary or latching footswitch operation.
  • Guitar pedals, digitech pedal guitar, digitech foot pedal, foot pedal, guitar pedal, foot controller, guitar effects..
Check Stock

Pigtronix Space Rip Synth Pedal

  • Rate: Controls the speed of the waveform’s motion. The pulse width of these waveforms is produced by the onboard VCO being kept in a state of flux.
  • Tune: Sets the fine tuning of the synth voices.
  • Sub: Adds an additional voice one octave down from the input signal.
  • Octave: Drops the entire synth sound down an additional octave.
  • Shape: Changes the waveform from a sawtooth to a square wave, or vice versa.
Check Stock

4 Way Active Crossover 15V Audio Signal Line Driver Bass Control Audiopipe XV-4-V15

  • High/Tweeter: 1Khz-12Khz @ 12dB/Octave Subwoofer: 40Hz-90Hz @ 12 dB/Octave.
  • Sub-sonic Filter: 10Hz-30Hz @ 18dB/Octave.
Check Stock

Yamaha Genuine Tenor Saxophone Neck Sax Gooseneck Mouthpipe YTS-23 YTS-25 YTS-200AD TS-100

  • Compatible models: YTS-23 YTS-25 YTS-200AD TS-100.
  • The octave system (connection of the new neck octave key to the main body octave lever) should be adjusted to work properly..
Check Stock

Gamechanger Audio Light Pedal

  • The LIGHT Pedal is the world’s first analog optical spring reverb system that uses infra-red optical sensors. Sounds ranging from classic spring tank tones to colorful optical spring reverb tones with modulation and added harmonics..
  • Separate level controls for the dry signal, spring and optical reverbs. The dry signal can be attenuated and boosted. Drive knob for adjusting the signal level sent to the reverb tank, thus affecting the reverb tank’s behavior..
  • 6 unique effects: optics (frequency and texture calibration), sweep (modulation), tremolo, reflect (delay), feedback and harmonic (added harmonics and octave tracking). Multiple effect stacking options. -Effects parameters can be linked to playing dynamics..
  • Tone knob ranges from rumbling lows to piercing highs..
  • Simple one-knob envelope control produces either gated or ducking reverb..
Check Stock

Memphis Audio VIV400.4 SIX FIVE Series 400W 4-Channel Car Amplifier

  • 65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
  • Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
  • Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
  • Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.
Check Stock

SupplySource AC DC Adapter Charger for ammoon AP-12 Voodoo Octave Fuzz Effect Guitar Effect Pedal True Bypass W4M0 Power Supply Cord Mains PSU

  • ✔SAFETY: SupplySource Products manufactured with the highest quality materials and include multiple smart features safeguarding against IV - incorrect voltage, SC - short circuit, IO - internal overheating. Chargers are certificated with CE FCC etc..
  • ✔POWER SPECS - Input Volt Range: 100-240V / Input Frequency : 50-60Hz / Cable Length: 4FT.
  • ✔NOTE: This Adapter is Brand New, High Quality Never USED (non-OEM). Please make sure the model of your device before buying.
  • ✔AC DC Adapter Charger for ammoon AP-12 Voodoo Octave Fuzz Effect Guitar Effect Pedal True Bypass W4M0 Power Supply Cord Mains PSU.
  • ✔NOTE: Please contact us with any questions or concerns..
Check Stock

Zoom V6 Vocal Multi-Effects Processor + Samson Studio Headphones + Mic Cable + Cleaning Cloth - Top Value Bundle

  • This Photo4Less Top Value Accessories Kit includes - : Zoom V6 Vocal Multi-Effects Processor - Samson SR970 Professional Studio Reference Headphones - Mic Cable XLR-M to XLR-F - Photo4Less Cleaning Cloth.
  • COMMAND YOUR PERFORMANCE: Perfect for live performance, you can easily activate effects and quickly recall your favorite settings..
  • FIND YOUR VOICE: Select your desired Voice Effect from 12 different options ranging from the Unison Effect to Octave Up/Down, to Vocoder. You can even chose Pitch Correct to deliver your EDM sound..
  • PRELOADED PATCHES: With 40 preloaded patches there are plenty of great sounds to choose from right out of the box. Or experiment and create and save your own..
  • A MIC DESIGNED JUST FOR YOU: The SGV-6 is designed to isolate your voice by suppressing sounds from other instruments on stage. The mic's vocal isolation enables the V6 to process your voice with unmatched accuracy..
Check Stock

Yinfente Professional Oboe C key left F Resonance semi-automatic Ebonite/Rosewood Oboe Case + Oboe Parts (Ebonite)

  • 1) Yinfente Brand New Oboe Ebonite Wood With nickel silver Copper-nickel alloy Material Forked-F resonance key Trill Keys Left F key.
  • 2) Third octave key Second octave key closes the first octave (semi-automatic system)， If you need Fully automatic system, please contact me. thanks..
  • 3) Nice And High quality trill keys, This oboe has been Tested and under good condition. Play tested intonation adjustments fit for the professional.
  • 4) It comes with oboe case and case cover. Like the Image Show.
Check Stock

Octave Blue ABS Filament for 3D Printers - 1.75mm - 1kg Spool

  • STRONG AND DURABLE 3D PRINTS - ABS is one of the plastic filament materials most commonly used for 3D printing. It produces durable 3D printed models that have higher resistance to heat and are less brittle than those printed with some other popular 3D printing materials (like PLA).
  • HIGH QUALITY ABS FILAMENT - Octave engineered its ABS filament to work at a wide extruder temperature range, and manufactures it to tight tolerances using quality materials, so it works smoothly and consistently.
  • PROFESSIONAL 3D PRINTED MODELS - Models printed with Octave ABS filament are tougher, more durable, and more heat resistant than models 3D printed with PLA, and have more in common with mass-produced plastic models and parts. Octave ABS can be sanded, glued, and painted, as well as post processed in an acetone vapor bath for a smoother, glossy finish..
  • WIDE COMPATIBILITY - Octave ABS filament prints at temperatures from 210-250℃, so it works well with most 3D printers that support 1.75mm ABS filament, like Raise3D, ZMorph, Afinia, FlashForge, Creality, Fusion3 F410, UP, PrintrBot, MakerGear, Solidoodle, CraftBot, and others (80-120℃ heated print bed strongly recommended, external spool holder may be required—always check your printers’ specifications)..
Check Stock