Top Nylon Machined Part Reviews

BILLET SPECIALTIES SCRIPT LS CAST VALVE COVERS,BLACK,# BLK95423

  • Pair of Brand New Chevrolet Script LS Cast Valve Covers (Black). Produced by Billet Specialties Inc. (Part #BLK95423)..
  • Features: Precision machined Chevrolet script logo | Precision cast valve covers | Includes valve cover gasket | Includes mount hardware | Screw in aluminum oil cap.
  • Give your LS motor that classic and traditional look with Billet Specialties Chevrolet script cast valve covers. Each precision cast valve cover is powder coated Black then machined with the iconic Chevrolet script. Sold in pairs..
Check Stock

Evike ARES Licensed Remington MSR Bolt Action Spring Powered Airsoft Sniper Rifle Model MSR-338 / Tan

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
  • Bolt action single shot spring powered rifle.
  • Precision CNC machined aluminum receiver.
  • Precision CNC machined handguard and stock.
  • 545mm Picatinny flat top rail for optics.
Check Stock

GAR S-22 22 Speciman Surface Roughness Comparator AS9000 Compliant

  • Pocket size gage with 22 precision surfaces for specifying and controlling surface finishes.
  • There are twenty two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled - ranging from 2 to 500 microinches.
  • The S-22 conventional machining microfinish comparator is rectangular in shape (2" x 5 3/8") and is a corrosion resistant electroformed nickel duplicate of actual machined surfaces.
  • Supplied in a leatherette case with engineering data and instructions.
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

Evike Tokyo Marui NEXTGEN RecoilShock System FN Herstal Licensed Airsoft Scar-L / MK16 AEG Rifle (Color: Black / MOD-0)

  • ◙ NOT a part or component. NOT for real weapons. Batteries, optics, and etc NOT included unless stated clearly. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange muzzle tips are preinstalled. Assembly may be required. ◙.
  • Heavy duty nylon fiber reinforced lower receiver with CNC machined aluminum upper receiver w/ fully licensed FN Herstal trademarks.
  • Uses Marui’s proprietary Next Generation Recoil Shock system (NGRS) to simulate recoil and muzzle flip.
  • When utilizing the NGRS magazine, mock bolt will lock back after the last round.
  • Adjustable 6 position folding stock w/ cheek riser.
  • Full length Picatinny top rail with additional rails at the 3, 6, and 9 o’clock positions.
  • Length: 820mm – 890mm (32.28″ – 35″) Adjustable / 640mm (25.19″) Folded.
  • Magazine Capacity: 82rd Mid-Capacity magazine. Uses Tokyo Marui NEXTGEN magazines.
  • [Style]: MOD-0 / Black – (Gun Only / No Optic).
Check Stock

BROYEUR Olympic Barbell Clamps Collar,Locking 2 Inch or 1 Inch Pair Diameter Standard Bar Weight Plates Collar Clips,Quick Release Barbell Clips for Weightlifting Bar (Black – 1 inch)

  • High-quality materials::The barbell collar clip is made of reinforced plastic and high-strength nylon, and the material is cast and high pressure machined, so it is not easy to break..
  • Safety protectection:The barbell clamp ring is more secure than most traditional spring clamps, the barbell clamp will lock firmly to the bar, keeping you safe..
  • Apply to:This barbell clamp is Perfect for crossfit workouts,overhead presses,Olympic lifts,bench press,deadlifts or any other workout using Olympic Barbell..
  • Easy to carry:Whether you’re working out at your personal gym, professional club or studio, our barbell clips are small enough to fit in your gym bag for easy portability..
Check Stock

DEWALT DCP580B 20V MAX Brushless Planer (Tool Only)

  • Brushless motor of the electric hand planner provides power and runtime.
  • The hand planer featuring 30,000 cuts per minute achieves a fast removal rate.
  • Calibrated depth adjustment knob to 1/256-inch (0.01 mm. approximately).
  • Precision-machined front and back aluminum shoes ensure parallelism of cut.
  • Kickstand allows user to rest the planer on work surface without gouging the material.
  • Precision machined groove in front shoe allows for edge chamfering.
  • Poly-V drive belt provides increased belt durability.
  • Ergonomically designed handle provides greater comfort and less user fatigue.
  • Replacement blades DW6654 Part Number: N447366.
Check Stock

Deflecto Aluminum Dryer Vent Elbow, Fully Adjustable, 4\

  • 4" diameter 90 degree aluminum duct elbow.
  • 4 sections riveted, each section machined together for full range adjustability, crimped at one end.
  • Fully adjustable aluminum elbow from 0 degrees to 90 degrees.
  • Light gauge, most commonly used in clothes dryer or bathroom venting.
  • Genuine replacement part, works with most major appliance brands.
Check Stock

HONESTILL AR A1 A2 Front Sight Adjustment Tool,Front Sight Post Tool,A1 A2 Style Iron Sight Adjustment Tools Accessories (37)

  • Made of quality steel with a nice black oxide finish.
  • Precision machined steel part: The edges of the prongs are sharply machined.
  • Simple & Effective Front Sight Adjustment Tool: elevation adjustment with both 4-Prong and 5-Prong for A1/A2 Front Sight Post.
  • Double-ended Design & Optimal Length for easy to use.
Check Stock

Proforged 105-10044 Billet Aluminum Tie Rod Sleeves - Manual Steering

  • CRAZY STRONG BILLET ALUMINUM TIE ROD SLEEVES. Proforged tie rod adjusting sleeves are machined from a solid bar of billet aluminum for ultimate strength. Every fit surface of these 6061-T6 aluminum sleeves are CNC machined for precision fit and finish - the threads are matched to our tie rod ends, and we recommend using them together for optimal results. These work with most other brands of tie rods, but there are occasional issues when other brands use a different thread tolerance or specification..
  • 1,000,000 MILE WARRANTY. You can install our tie rod sleeves with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
Check Stock

Vals e Lönn

  • APPLICATIONS - Compatible with Cummins ISX12, X15 and ISX15 engines with single overhead cam.
  • BENEFITS - Use to remove and install front crankshaft seal and wear sleeve without damaging the seal and leakage.
  • REPLACEMENT - This is a high-quality aftermarket product. Directly replace part numbers 4918991. Each part is manufactured to OEM specifications and....
  • QUALITY - Advanced CNC machined heavy duty steel with black anodized finish.
  • INCLUDES - The 4918991 crankshaft seal kit includes:(1)Sleeve Remover.
Check Stock

NICECNC Green Battery Cover Guard Protector Compatible with Kawasaki KLR 650 2008-2018 2017 2016 2015 2014 2013 2012 2011 2010 2009, 6061 Aluminum CNC

  • △ Super Sturdy:Made from 6061 aircraft grade aluminum of great hardness, providing strong protection for your energy battery..
  • △ CNC Machined:Machined by cutting-edge CNC technology, accuracy of each cutting part can be ensured for easy installation. Allowing you to appreciate the every little detail of the product..
  • △ Resistant to Rust:A protective film has been deposited on the product, capable of defending itself from bright sunlight, heavy rain and snow..
  • △ Perfect Fitment:Replacement For Kawasaki KLR 650 2008-2018..
  • △ Package Included: 1X Battery Cover,1X Installation Kit.
Check Stock

KINGSEESUN Ring Bender Tool Ring Bending Tool for Jewelry Making Ring Maker Tool with Nylon Dies Little Spoon Bender for Soft Metals Ring Making Tool

  • Ring bender is one of the most commonly used jewelry making tools, like other ring bending machines, you can easily get the more accurate size and shape with these ring tools. so you'll have more time in the focal part of their statement rings..
  • This bending tool must be fixed directly to your workbench by using screws or if you have a fixed bench vice, the ring bender can be placed on top of the vice jaws..
  • Ring bender tool is exquisitely made and has superior performance, the base and handle perform at a high level of torque while allowing the user to exert less resistance in bending metals..
  • Most ring bender machine tools bend the material by an external force, so it is unavoidable to leave marks on the material. so this ring bending kit comes with superior nylon dies that will allow you to make bends without marring delicate materials..
  • The ring bending is machined from solid steel and then hardened to 45-50 HRC. Each steel post and die are black oxidized, and there is no corrosion for life..
Check Stock