Top Notebook Lcd Ribbon Cable Reviews

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 128cm Length 2.54mm Pitch 2pcs Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • Connector Type: Type B (Please refer to the last picture).
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 66cm Length 2.54mm Pitch Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-B" means the pin holes towards to the same side, meanwhile, the two buckles are both inside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 148cm Length 2.54mm Pitch Type-C

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-C" means the pin holes towards to the same side, meanwhile, the two buckles are both outside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

Antrader 30CM 16-Pin IDC Connector Flat Ribbon Cable with Black 2.54mm FC Dual Row Female to Female Sockets, 6 Pieces

  • Double rows, 8Pin female to 8Pin female header with both end, compatible with 2.54mm spacing pin headers..
  • Total length is 12" (30cm) with 2.54mm Female to Female 16P 2 x 8 sockets..
  • Wire Pitch: 0.05" (1.27 mm) Center Spacing.
  • Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • 6pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
Check Stock

Antrader 10Ft/3M IDC 40Pin 1.27mm Rainbow Color Flat Ribbon Wire Cable for 2.54mm Connectors

  • Pitch: 0.05″ (1.27 mm) Center Spacing for 2.54mm Connectors.
  • Wire: 40P 28 AWG (7×36) Stranded 300V UL.
  • Use this flat ribbon cable to build your own custom cables. Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc..
Check Stock

uxcell IDC Wire Flat Ribbon Cable FC/FC Connector A-type 14 Pins 2.54mm Pitch 1m Length Gray

  • Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Suitable for digital cameras, digital camcorders, laptops, LCD TVs, LCD..
Check Stock

uxcell IDC Wire Flat Ribbon Cable FC/FC Connector A-type 40 Pins 2.54mm Pitch 1m Length Gray

  • Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Suitable for digital cameras, digital camcorders, laptops, LCD TVs, LCD..
Check Stock

LCD Screen Touch Digitizer Flex Cable Ribbon Compatible with Apple Watch Series 2 2nd Generation (42mm)

  • LCD Screen Digitizer Flex Cable Ribbon Compatible with Apple Watch Series 2 2nd Generation.
  • Compatible with: Apple Watch Series 2 2nd Generation(Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
  • Broken your LCD Screen Flex Cable ? don’t need to change new device, just buy this item and replace your damage LCD Screen Flex Cable , let your machine work again..
  • Tips: This is replacement to replace your old damage LCD Screen Flex Cable , don’t include instructions, please install it by a professional technician..
Check Stock

SamIdea 2-Pack 40pin Male to Female IDC GPIO Rainbow Ribbon Cable Jumper Wire for Raspberry Pi A+/B+/3 B, 20cm/8'

  • 8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero.
  • Pin Pitch: 2.54 mm,Their Diagram as Product image show.
  • 2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable.
  • GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5¡± 5 inch TFT touchscreen LCD display are not including..
  • SamIdea is a Registered Trademark, can not sold without authorization..
Check Stock

LCDOLED Replacement 15.6 inches Touch Screen Digitizer Front Glass Panel with Touch Control Board for ASUS Q534 Q534U Q534UX Q534UX-BBI7T16 Q534UX-BHI7T19 Q534UX-BI7T22 (No Bezel)

  • 1. Compatible Model: for ASUS Q534 2-in-1 Notebook Q534U Q534UX Q534UX-BBI7T16 Q534UX-BHI7T19 Q534UX-BI7T22 ； Warranty: 3 months.
  • 2. Size: 15.6 inches；Package Included: ONLY a touch digitizer + touch control board (NO bezel, NO LCD screen).
  • 3. Notice: No extra LCD screen, bezel, back cover, hinges, instruction or installation tools , etc. Please keep your original parts. Professional installing skill required..
  • 4. The item is only available for the laptop with touch function. It will be well tested and packed before shipping. 3 months warranty provided against quality problem..
  • 5. Please kindly check your model and size again before you purchase. If you are not sure whether it is the correct item you need, please contact us with specific model and pictures of your original digitizer glass ribbon cable..
Check Stock

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

19.6 inch Camera Cable for Raspberry Pi 4 B FFC FPC Ribbon 15 pin Extension Cord Flexible Flat Wire Cable Connection for LCD,Car Navigation,Car Audio,DVD Player,Recorder,Printer 19.6''/ 50cm (2 Pcs)

  • This ribbon flat cable is specially designed for stock long flex cable from a Raspberry Pi Camera for 19.6inch (50cm )..
  • The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface..
  • Each order comes with two cables, the raspberry pi and pi camera shown in the picture are not included (but we have Pi camera in the shop)..
  • This cable is perfectly compatible for Raspberry Pi 3, 3 model b, 2, 2b and B+..
  • Also applicable for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc..
Check Stock

Aokin for Raspberry Pi Camera Cable, FFC Cable Ribbon Flex Extension Cable 15 Pin 1.0mm Pitch for Raspberry Pi, Octoprint Octopi Webcam, Monitor 3D Printer, etc, 50cm/19.68in

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be flexible with camera placement..
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to Raspberry Pi camera and another end with 15 Pin 1.0mm Pitch interface to Raspberry Pi board..
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • also use for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc. Model: FFC.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock