Top Non metal Materials Reviews

316442301 mp26ya electric burner replacement (8''Coil Range Cooktop Stove,5 Turns) - Surface Burner Heating Element 316442301 suitable for whirlpool, Frigidaire, Kenmore 3192224 acr4303mewo,etc.

  • ...ove. The surface element is 8 inches, the coil has 5 turns, has a black center medallion, loop terminals, and a Y-shaped bracket.The flat solid flat inserts give more Surface connection. The Dimensions 8 x 3 x 8 inches. The power is 2600W 240V..
  • ✅【NON-METALLIC METALLIC MATERIALS WITH HIGH RESISTIVITY】:316442301 Burner element surface(8’’coil 5Turn)is made of non-metallic materials with high resistivity, low temperature coefficient of resistance, small high-temperature deformation, and low embrittlement. The 316442301 mp26ya burner element allows you to heat up anything, from water or soup to sauces, stir-fries, etc..►It can fix the following symptoms:①this part burns out,②the heating element will not heat,③Its terminals are damaged due to a bad terminal block,④heating too slow..
  • ✅【NON-METALLIC METALLIC MATERIALS WITH HIGH RESISTIVITY】:316442301 Burner element surface(8’’coil 5Turn)is made of non-metallic materials with high resistivity, low temperature coefficient of resistance, small high-temperature deformation, and low embrittlement. The 316442301 mp26ya burner element allows you to heat up anything, from water or soup to sauces, sti....
Check Stock

WD-40 Multi-Use Product and WD-40 Specialist Silicone Lubricant Combo Pack, Smart Straw Sprays 2 Ways, WD-40 Original Formula 12oz and Water-Resistant Silicone 11oz (Pack of 2)

  • A clean, light-duty product, excellent for non-metal materials.
  • Waterproofs, protects, lubricates and preserves.
  • For use on rubber, plastic, vinyl, leather, metal and wood.
  • Eliminates squeaking and binding in windows, hinges, locks, etc..
  • Helps prevent rust, oxidation and corrosion on all metals.
  • A clean, light-duty product, DuPont Silicone Lubricant with Teflon Fluoropolymer is excellent for non-metal materials that may be damaged by conventional lubricants.
Check Stock

Fishing Handle Nut Screw NutBearing Cover for Fishing Reel Left/Right Handle Knob Locking Plate DIY Fishing Accessory 4 Colors Selectable (Pack of 2)(Gold Left Hand) baitcaster handle baitcaster

  • High Quality Material: The Screw NutBearing Cover is made of quality metal material, it's high strength, non-deformation, anti-rust and durable. Good quality not only can provide a safer guarantee for your life, but also good materials can increase product life..
  • Features: The Screw NutBearing Cover constructed with high standards, fits your fishing rod perfectly. Pretty colorful plated surface is glossy, colorfast and wearable..
  • Excellent Performance: The Screw NutBearing Cover has stable performance, high reliability. Exquisite workmanship, stylis....
Check Stock

Rocaris 1\ Brown 120 Grit Abrasive Buffing Polishing Wheels Burr For Rotary Tools-1/8\(3mm) Shank 50 Pack

  • 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel ,120Grit.
  • 【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 120 grits,total 50pieces. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass.
  • 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials..
  • 【Convenient And Practical】 Small buffing wheel is an efficient polishing tool of metal and non-metallic materials in small area of rust deburring and surface polishing, high efficiency, low cost.,used with most rotary tools.
  • 【Widely Applications】Fit for your polishing need, these polish wheels are suitable for metal surface cleaning, grinding, dusting, deburring, polishing, stripping residue, removing oxide, Meanwhile these are great for polishing jewelry or other metal working uses. they can be used with a tool, fit for rotay tools grinder etc.Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel.
Check Stock

Stanley 57-532 21-Ounce Compo-Cast Standard Head Soft Face Hammer

  • Uni-Cast construction of non-ferrous materials eliminates sparking and won’t absorb liquids..
  • No exposed metal on face, head or shaft..
  • Dead blow function eliminates bounceback when striking hardened surfaces..
  • Steel reinforced handle provides strength and resists breaking on overstrike..
  • Uni-Cast construction of non-ferrous materials eliminate sparking and won't absorb liquids.
  • Dead-blow function uses steel shot to eliminate bounce back. Handle is reinforced with steel to provide strength and safety and to prevent breaking on overstrike.
Check Stock

Epoxy

  • This two-part xpoxy 330 water-clear glue line bonds with fast setting time..
  • Used to bond gem materials to metal jewelry findings and takes a high polish for inlay..
  • It can also be used for invisible bonding of glass china ceramics stone metals and other non-porous materials..
  • Thickens in 15 minutes and hardens in 2 hours..
  • Hardens in 10 minutes under a heat lamp. Two 1/2 fl. oz tubes..
Check Stock

LOYALHEARTDY Mini Electric Benchtop Table Saw, Power Tool Multi-functional Cutte metal Wood Glass Cutting sawing Machine

  • ??low-noise motor with two saw blades, one 4 inch Carbide Tipped Blade, and one 4 inch Dry Diamond Blade..
  • ??Can be plastic, wood, glass, stone and other non-metallic materials and copper, aluminum and other non-ferrous metal materials for cutting..
  • ??If you have any questions, you can contact customer service, we will give you a satisfactory answer within 24 hours.
Check Stock

Evolution Saw Multipurpose RAGE3 Blade - 10 Inch Circular Saw Blade - RAGE255BLADE

  • These Saw Blades are rated for cutting wood materials like boards or MDF and metals such as square tube, angle iron, mild steel plate, pipe, tube, and other non-ferrous metals..
  • The cutting blades are not limited to the these materials, but perform at their peak when cutting them specifically..
  • Cuts wood, wood with nails, mild steel, brass, copper, plastics and other materials without heat, burrs or coolant..
Check Stock

ONENUSYON 4\ Mini Table Saw Cutting Tool Architectural Modeling Tool DIY Manual Table Saw,With 2 Saw Blades, Suitable For Wood, Glass, Copper, Aluminum

  • ✨Thickened anti-vibration feet, stable machine, efficient and quiet..
  • ✨Lightweight and easy to carry, with two saw blades, one 4" carbide blade and one 4" dry diamond blade..
  • ✨Adjustable cutting depth to meet your different needs..
  • ✨It can cut non-metallic materials such as plastic, wood, glass, stone, and non-ferrous metal materials such as copper and aluminum..
Check Stock

2 Epoxy 330 Water Clear Adhesive Lapidary Rock Gem Glue

  • This is a new set of 4 tubes of Epoxy 330.
  • Used to bond gem materials to metal findings and takes a high polish for inlay.
  • It can also be used for invisible bonding of glass, china, ceramics, stone, metals and other non-porous materials.
  • Thickens in 15 minutes and hardens in 2 hours.
Check Stock

Mini Table Saw Cutting Tool 4\ Saw Blade Small Cutting Machine Portable Table Saw for Wooden Ceramic Tile Glass Metal Cutting

  • ★Mini table saw cutting tool,lightweight and easy to carry..
  • ★Driven by a high-efficiency, low-noise motor.
  • ★With two saw blades, one 4 inch Carbide Tipped Blade, and one 4 inch Dry Diamond Blade..
  • ★Can be plastic, wood, glass, stone and other non-metallic materials and copper, aluminum and other non-ferrous metal materials for cutting..
Check Stock

OBA Wood Carving Disc for Angle Grinder 4 1/2 Inch Wood Shaping Grinding Wheel with 7/8” Arbor

  • ★Universal Applicability:Diameter is 4-1/2 inch and arbor is 7/8 inch so this size can fit all 115 mm and 125 mm angle grinders in the market..
  • ★High Premium Material:This cavring dics is made by premium Carbon steel which has the higher hardness and longer life..
  • ★Application:This wheel can be used for wooden materials,grinding,carving and any other DIY wood works..
  • ★Unique Design:Depend on the special thorn design,this grinding wheel is powerful and more efficient than other grinding wheels..
  • ★Notice: This wood shaping grinder wheel should be used on non-metals or non-metal materials..
Check Stock

DEWALT Flap Disc, Zirconia, 4-1/2-Inch x 7/8-Inch, 80-Grit (DW8309)

  • Material: The wood shaping disc made of high quality steel, stronger and more durable, wear resistance. Grinding for convex and concave areas, shaping and deburred fastly.
  • Size: Outer Diameter: 85mm (3-5/16 inch ), Inner diameter: 22mm (7/8 inch ). The wood carving disc compatible with 7/8 in aperture angle grinders. Compatible With following: Dewalt, Makita, Bosch, Black & Decker, Milwaukee, Hitachi & more..
  • Scope of Application: The angle grinder disc is suitable for the rapid removal of stocks and wood shaping. It should only be used on non- metals or non-metal materials, suitable for wood and other materials.
  • Easy To Operate: Give you a outstanding wear-life.Provides rapid material removal, saving your time and effort, suitable for curved work.
Check Stock