Top Non ferrous Materials Reviews

TTC 1/4\ C HSS Keyway Broach w/Shim

  • Specialty tools designed for cutting keyways in machined holes..
  • Typically used manually with an arbor press or hydraulic press to produce the keyways..
  • Well suited for use in a variety of ferrous and non-ferrous materials..
  • Hardened and ground bars with cutting teeth on one side..
  • Broach is tapered, allowing teeth to cut keyway to proper depth..
Check Stock

Makita 792555-A Portable Band Saw Blade 44-7/8 x 1/2 24TPI Bi-Metal Stainless Steel

  • BI-Metal construction for up to 3x longer life than carbon blades.
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick.
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals.
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel.
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws.
Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

  • High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
  • High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
  • Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
  • High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
  • Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check Stock

Milwaukee 48-39-0572 Sub-Compact Portable Band Saw Blades, 27-Inch 18TPI, 3 Blades per Pack, 2 Pack (6 Blades Total)

  • BI-Metal construction for up to 3x longer life than carbon blades.
  • 24 TPI configuration ideal for use cutting materials up to 1/8" thick.
  • Makes clean, quick cuts in a variety of ferrous and non ferrous metals.
  • Ideal for cutting a wide variety of materials including, rebar, pipe, all thread and channel.
  • For use with Makita corded and cordless portable band saws as well as competitor 44-7/8" portable band saws.
Check Stock

2 inch X 50 YD Sanding Shop Roll 320 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock

Tacklife Smart

  • Accurate and Quick Stud Finder - The ENGiNDOT stud finder can detect 4 materials include wood, ferrous metals, non-ferrous metals, and AC wires. This....
  • Wire Warning & Metal Detection up to 100MM - Electrical wire detection is up to 2 in.(50mm) depth. No matter what detection mode it is in, AC live....
  • Automatic Calibration & 3 Signal Lights- Saving your effort the stud scanner calibrates automatically without pressing the button manually all the....
  • Works on Wallpaper & Fabric too - The stud finder is not just suitable for drywall. It also scans through the surfaces covered in wallpaper, popcorn....
  • Durable Material and Ergonomic Design - Featured soft rubber buttons to provide a comfortable using experience. This stud finder wall scanner comes....
Check Stock

AUTOKAY New HSS 5/8\-24 UNEF Right Hand Thread Tap and Die Set (5/8x24) RH

  • Thread diameter (D): 5/8'' or 0.625inch or 15.875mm.
  • Application: Cutting Tools & Consumables, arbon steel,alloy steel and cast iron hole processing etc.
  • High speed steel (HSS) provides good wear-resistance.
  • Can be used in general purpose applications for both ferrous and non-ferrous materials.
  • Package:1x 5/8" - 24 TAP,1x 5/8" - 24 DIE.
Check Stock

FXIXI HSS Gear Milling Cutter,Module 2 Diameter 22mm 20degree #1-8 HSS Involute Gear Milling Cutter (#7)

  • Specialty cutting tools designed for milling gears..
  • Sized and proportioned to afford a good cutting range and ample rigidity..
  • Straight form tooth design to suit the involute gear form..
  • Well suited for use in a variety of ferrous and non-ferrous materials..
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

Red Label Abrasives 1 1/2 inch X 50 YD Sanding Shop Roll, 100 Grit

  • Premium aluminum oxide semi-closed coat product for general purpose use.
  • This general purpose material is flexible enough for edges and continuous and durable enough for hard woods and metals.
  • 50 yards of material are on a spool and encased in cardboard dispenser for easy access in shop environments.
  • Great for: hardwood, non ferrous metals (aluminum, titanium, etc), ferrous metals (stainless, etc), composites, paint and finish.
  • Recommended for dry sanding only | Can Be used on damp materials.
Check Stock