Top Noise Damping Paint Reviews

Hanger Mount Vibration Isolator, Ceiling Suspended Mounted Hanger, 100% Natural Isolator Type, Capacity Range: 10 to 35 lb.

Suitable for air compressors, diesel engines, gasoline engines, water pumps.
As a damping element for welding machine and other equipment for vibration, shock and noise control.
Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious..
In the radio equipment, instruments, instrument, protect machine vibration interference , with a good buffer.

Check Stock

DiversiTech EL3636-3 E-Lite Condenser Pad, 36\ x 36\ x 3\

Mainly Used: This anti-vibration rubber isolator mount is mainly used for air compressors, diesel engines, gasoline engines, water pumps..
Damping Elements: This anti-vibration rubber isolator mount always used as damping elements for vibration and noise control..
Main Function: This anti-vibration rubber isolator mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously..
Simple Geometrical Design: This anti-vibration rubber isolator mount adopts simple geometrical design that supports dynamic performance and stability under lateral/sideways forces..
Anti-Vibration Silent Block: In audio equipment and instruments, This anti-vibration rubber isolator mount avoids machine vibration interference, having a good buffer..

Check Stock

JL Audio JD500/1 500 W Monoblock Amplifier

Frequency Response: 7 Hz - 500 Hz (+0, -1dB).
Min.Copper Power / Ground Wire Gauge: 4 AWG wire.
S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth).

Check Stock

JL Audio JD1000/1 Monoblock Class-D Subwoofer Amplifier 1000 W

Frequency Response: 7 Hz - 500 Hz (+0, -1dB).
Min.Copper Power / Ground Wire Gauge: 4 AWG wire.
S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth).

Check Stock

Pack of 6 LukLoy Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity (Pack of 6)

BRIEF INTRODUCTION - This Rubber Anti-Vibration Isolation Mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously. Mainly used for air compressors, diesel engines, gasoline engines, water pumps, and other welding machine and other equipments as a damping element..
MAIN USE - Used as damping elements for vibration and noise control..
FUNCTION - Protect the machine's normal work and get good surroundings, reducing noise and shock obviously..
HIGH PERFORMANCE - Simple geometrical design supports dynamic performance and stability under lateral/sideways forces..
FEATURE - In audio equipment and instruments, avoid machine vibration interference, having a good buffer..

Check Stock

Thermalright TL-8015W CPU Fan Computer case Fan Quiet 4pin PWM PC Fan, 15mm Slimline Cooler Fan, 2200RPM Speed, 80mm CPU Cooling Fan(White)

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*15mm, Speed: 2200RPM±10%, Noise ≤23.3dBA Connector: 4pin pwm, wind pressure: 1.25mm H2O,Air Flow: 28.4CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers..

Check Stock

Thermalright TL-B8W CPU Fan Computer Case Fan Quiet 4pin PWM PC Fan, 80mm Silent Cooler Fan, 2200RPM Speed, CPU Cooling Fan(White)

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*25mm, Speed: 2200RPM±10%, Noise ≤24dBA Connector: 4pin pwm, wind pressure: 2.7mm H2O,Air Flow: 34CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers. Easy to install, can be combined with instructions or installation tutorials..

Check Stock

Dynamat Xtreme Speaker Kit Pair 12 x12 1 Pack

10455 - Dynamat Xtreme 36ft Bulk Pack Sound / Vbration Damping for an Entire Car.
Dynamat Xtreme Bulk Kit Sound and Vibration Damping/Deadening for the Entire Car.
Designed for use on rear decks, doors, floors and the floor of your trunk.
Contains nine 18" x 32" sheets of Dynamat.
Get more bass, more music, lower road noise and better sound for your car audio system.

Check Stock

Mason Hanger Mount Vibration Isolator, Spring Isolator Type, 130 to 175 lb. Capacity Range - 5C143

... resilient, anti-vibration, the metal stud is two pieces terminated and bonded within the rubber..
【Anti Vibration Design】--These heavy duty mounts provide excellent noise and vibration reduction, Composite material with natural rubber by innovative synthesis make the rubber mounts more efficient and durable..
【Damping Capacity】--As a damping element for welding machine and other equipment for vibration, shock and noise control. These heavy duty rubber isolator mounts provide excellent noise and vibration reduction due to the softness of the rubber..
【Adapt to many kinds of motors】--Rubber isolator mounts are suitable for air compressors, diesel engines, gasoline engines, water pumps, Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications..
【More after-sales service】--We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the anti vibration bobbin mounts, please contact us by e-mail, we will try our best within 24 hours to reply..

Check Stock

4 X M6 Anti Vibration Rubber Bobbin Mounts 20x10Mm Male Boat Car Damper

Mainly used for air compressors, diesel engines, gasoline engines, water pumps..
Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious..
As a damping element for welding machine and other equipment..
In the radio equipment, instruments, instrument, protect machine vibration interference , have a good buffer..

Check Stock

Cuziss Glass Fiber Flight Controller Anti-Vibration Damping Plate Shock Absorber Set for QAV250 CC3D Naze32 Mini APM Mini Flight Control

Mainly Used: This anti-vibration rubber isolator mount is mainly used for air compressors, diesel engines, gasoline engines, water pumps..
Damping Elements: This anti-vibration rubber isolator mount always used as damping elements for vibration and noise control..
Main Function: This anti-vibration rubber isolator mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously..
Simple Geometrical Design: This anti-vibration rubber isolator mount adopts simple geometrical design that supports dynamic performance and stability under lateral/sideways forces..
Anti-Vibration Silent Block: In audio equipment and instruments, This anti-vibration rubber isolator mount avoids machine vibration interference, having a good buffer..

Check Stock

50Pack Industrial Dispensing Needle Accessories Plastic Syringes 18ga Needles

Scope of application: Vinyl Paint Alcohol Clear Water Silicone Silver Paste Ink Yellow Glue Silicone Lubricant Solder Paste Damping Oil SMT Red Glue UV Glue Fast Glue Crystal Glue Glass Glue Heat Cream Trumpet Glue Anti-friction Screw Adhesive Marking Paint Chemical Reagent Epoxy Resin Electrolysis Liquid magnetic fluid oil and so on.
Package Dimensions: ?3.74 L x 3.43 W x 1.97 H inches.

Check Stock

Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

...ry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: 003c0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V..
Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): 003e400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: 003e 100dB, IMD 60Hz & 1kHz, 4: 1: 003c0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch..
Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max..

Check Stock