Top Necessary Roofing Supplies Reviews

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

  • Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
  • Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
  • 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
  • Non-toxic, eco-friendly, low VOC & made in the USA.
  • 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

Deck Demon Wrecking Bar - 44 Inch Steel Deck Board Remover Tool - Save Time Removing Old Boards and Breaking Pallets - Heavy Duty, Non-Slip Handle with Dual Claw Head Nail Puller - Red, DD-201

  • ... with a dual tine crowbar head to efficiently remove boards, decking, siding, roof, strapping, fasteners, and nails without kneeling or straining your back.
  • Increase Your Efficiency - the breaker bar pry tool features a 44-inch handle with a padded non-slip grip (no gloves necessary) to help reduce your time and labor invested in deconstructing and renovating home improvement projects from a comfortable standing position.
  • Maximum Leverage - this pallet breaker tool straddles the stud/floor joist/beam as a fulcrum point and provides a more stable position for prying to make board splitting more like paper splitting. Great to use as roofing tools, flooring tools.
  • Dual-Claw Head - Deck Demon’s dual-claw head is designed to fit over single and double joists and features 2 beveled cats paw nail puller slots, for removing nails and screws. The patented rocker design removes decking without damaging the joists.
  • Wood Working Tools And Equipment - solid steel, commercial grade demolition bar with a powder coated finish to protect against rust and corrosion for long lasting quality. The ul....
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

1 Pail, 4 Gallon Each of Roofing Latex Bonding Glue Adhesive. 100% Full Refund Guarantee Available

  • 1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
  • Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
  • Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
  • Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
  • Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..
Check Stock

#14 Metal Roofing Screws 250 Screws x 1-1/2 Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood Sheet Metal Screws with EPDM Washer for Corrugated Roofing

  • Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
  • Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
  • #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
  • Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
  • For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Check Stock

Honey Lake Beekeeping Supplies Bee Smoker Starter Kit,16 Pcs Beekeeping Kit Bee Keeping Supplies-All Beginners Kit Including Bee Smoker and Different Kinds of Beekeeping Tools

  • Product Name:Beekeeping Supplies Bee Smoker Starter Kit,16 Pcs Beekeeping Kit Bee Keeping Supplies-All Beginners Kit Including Bee Smoker and Different Kinds of Beekeeping Tools.
  • Necessary Beehive Tools:Bee Smoker,L Hook,J Hook, Smoker Pellets,Beehive Tools,Queen Cage,Queen Bee Marking Tube, Bee Grip and Bee Brush.
  • Necessary Protect Gear: High Quality Leather Beekeeping Gloves, One Fit All.
  • Necessary Uncapping Tools: Uncapping Fork, New Designed Uncapping Tool, Uncapping Knife,Honey Filter and Honey Gate.
  • Great Beekeeping Kit: Meet all the Beekeepers' Needs, Necessary Bee Kit Beekeepers Must Have.
Check Stock

Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

00 Superflex TPO RV Rubber Roof | Camper Rubber Roof | Trailer Roof | Motorhome Roof | Camper Roof | RV (Camper) Roof Repair | Trailer Roof Repair (9.5FT Width, 10FT Length)

  • WILL NOT CHALK, FADE OR STREAK - Superflex RV roofing is a redesigned coverage system that has been engineered not to chalk, fade, or leave streaks like other competitive products in the RV aftermarket industry..
  • FLEXIBLE - SUPERFLEX Roofing Membrane is very stretchable and conforms to the multiple contours of todays RVs in a clean, chalk-free, non-fade membrane..
  • WITH RESISTANT PROPERTIES - This RV roofing has resistant properties, which means keeping maintenance down to a bare minimum..
  • WEATHER PROOF – Weather proof, providing excellent protection against the elements, including rain and wind..
  • INDUSTRY STANDARD ROOFING - Considered to be the industry standard material for all RV purposes. It beats both fiberglass and aluminum when it comes to weight, cost and ease to repair..
Check Stock