Top Na Miata Exhaust Reviews

Mutazu Performance Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 T-304 (CBE-043A)

Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
Muffler Exhaust Tips: 3.5" Round / Piping Inlet Size: 2.5" OD.

Check Stock

Red Hound Auto Front License Plate Bumper Mounting Bracket Compatible with Mazda Miata 1999-2005

1 Front Bumper License Plate Mounting Bracket (hardware not included).
Constructed of durable heavy duty black automotive grade steel, coated for rust and weather protection.
Genuine Red Hound Auto product, designed for a direct, perfect fit, approximately 12-7/16" wide (Reference: NA0150180A).

Check Stock

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.

Check Stock

Coilovers for Mazda Miata MX5 MX-5 NA NB 1989-2005 Suspension Coil Spring Struts Shock

Fit for Mazda Miata MX5 MX-5 NA NB 1989-2005.

Check Stock

J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]

【FITMENT】Compatible with 1990-1999 Mazda Miata.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

Miata Is Always The Answer Premium T-Shirt

JDM roadster enthusiast, drop top convertible lovers. Eunos roadster NA NB vert drift missile time attack car. The most universal car to enjoy whether if it is at the track, through the canyon roads, or out in downtown. Miata is always the answer..
Makes great gift, men, tuning car enthusiasts, mechanics, engineers, fathers, sticker, street race lovers, boys. Japanese street mountain downhill drift inspired racing apparel for tuners and drifters. Car themed.
This premium t-shirt is made of lightweight fine jersey fabric.
Fit: Men’s fit runs small, size up for a looser fit. Women’s fit is true to size, order usual size..

Check Stock

DNA MOTORING CBE-MM90 Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
【Quality Construction】Made of High Quality 409 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】2.5″ OD Inlet / 2.5″ OD Main Piping.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

DNA MOTORING CBE-MM90-BT Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】2.5" OD Inlet / 2.5" OD Main Piping.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

MagnaFlow Cat-Back Performance Exhaust System Street Series Kit 15715 - Designed for the 1990-1997 Mazda Miata - 2.25in Main Piping, Single Straight Passenger Rear Exit, Polished 4in Exhaust Tip

MODERATE SOUND/STREET SERIES - Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 1990-1997 Mazda Miata.
CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the exhaust that lasts the lifeti....

Check Stock

Godspeed(MSS0150) MonoSS Coilover For Mazda Miata 90-05(NA/NB) Ver2 / With (2.75" EXTENDED TOP HAT)

Compatible With Mazda Miata MX-5 (NA/NB) 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005.
2.75" Extended Top Hat For Rear Strut To Provide More Shock Travel.
52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
Independent Spring Tension And Height Adjustment.
Racing Grade Shock Oil With High Viscosity Index.
Shock Absorber Can Be Rebuild When Worn Out.
Full 1 Year Limited Warranty From Date Of Purchase.
Install By Experienced Professionals Is Highly Recommended.

Check Stock

Godspeed MSS0150 MonoSS Coilover Lowering Kit, Fully Adjustable, Ride Height, Spring Tension And 16 Click Damping, for Mazda Miata(NA/NB) 1990-05

Fits 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Mazda Miata MX-5(NA/NB).
Spring Rate(Front/Rear): 10 kg/mm/8 kg/mm.
52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
Independent Spring Tension And Height Adjustment.
Racing Grade Shock Oil With High Viscosity Index.
Shock Absorber Can Be Rebuild When Worn Out.
Full 1 Year Limited Warranty From Date Of Purchase.
Install By Experienced Professionals Is Highly Recommended.

Check Stock

For 1990-2005 Mazda MX-5 Miata NA NB Smoke Lens Amber LED Front Bumper DRL Side Marker Light Fender Parking Lamp, Driver & Passenger Side

[For Front Bumper Application] - Fully Compatible with All 1st & 2nd Gen. 1990-2005 Mazda MX-5 Miata NA NB.
[Premium LED Technology] - Advanced LED Design to be Visually Striking & Enhance Visibility At Night.
[Fully Plug & Play] - Simply Remove Original Housing & Bulbs. Connect The Plug. Done..
[Cool Smoked Lens] - Intended For Car Show or Off-Road Use Only.
[Purchase with Confidence] - 90 Days Warranty to Cover Any Defects & Damage During Transit to Ensure 100% Satisfaction. In-House US Tech Support Always Ready to Troubleshoot and Help on Any Concern..

Check Stock

Rev9 R9-HPX-1050_1 Hyper-Street ONE Coilover Lowering Kit, Adjustable, Compatible With Mazda Miata (NA) 1990-97

Compatible With Mazda Miata (NA) 1990 1991 1992 1993 1994 1995 1996 1997 1998.
Spring Rate: Front – 10 kg/mm (560 lbs/inch) | Rear – 8 kg/mm (448 lbs/inch) // Damping Levels: 16 Levels // Top Mount: Front – Yes, Standard Pillow Ball | Rear – Yes, Standard Top Mount.
Mono-Tube Shock Design With 16 Levels of Damping Force Adjustment Combined With Upgrade Spring Rate..
Sport Tuned Lowering Springs To Ensure Ride Improvement.
Lower Range From 1.25 to 2.25 inch Drop(May Vary Depends on Car Models, NOT SUPER LOW TYPE).
Affordable Pricing Performance Suspensions Upgrade.
Improve Overall Handling and Ride Quality When Lowered..
No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires. Limited Warranty Prodvided By Manufacturer(Parts Only).

Check Stock