Top Mtb Stem Riser Extender Reviews

Glaray Bike Stem Extender Bicycle Fork Stem Riser 28.6mm Handlebar Extension Head Up Adapter for Mountain Bike, Road Bike, MTB, BMX Glaray003

[ 6 Spacers Included ] The bicycle stem extender is equipped with 6 gaskets, 2 x 20mm, 3 x 10mm and 1 x 5mm, can increase the height up to 145mm..
[ Adjustable Height ] You can freely adjust the stem riser to fit your own height, that will make your riding more comfortable..
[ Easy to Install ] Just connect up the original front bike fork stem..
[ High Quality Material ] The bike stem is built with forged 6061 aluminum alloy material, polished anodized finish, solid and durable..
[ Perfect for Most bikes ] Diameter: 28.6 mm. The bike handlebar extender is suitable for bike with 1-1/8'' threadless headset, please check it before purchase..

Check Stock

Mountain Bike Handlebars, 680mm MTB Handlebars, Carbon 31.8 Handlebar, Gray 3K Matt Mountain Bike Handle Bars Riser MTB Bars, Lightweight Flat MTN Bike Handlebars for Downhill XC Enduro Off-road

...ontrol over even the roughest terrain..
SHOCK ABSORPTION: bicycle sweep handlebars can handle very rough road conditions, such as lots of rocks, roots, drops and bumps. handlebar mtb 31.8 take out some of the vibration from gravel and dirt paths, and handlebars 31.8mm riser increase control and give you a super smooth ride on super commutes, gravel roads. Say goodbye to sore hands, wrists, back and neck..
WELL FINISH: flat handlebar mountain bike is well made with beautiful carbon fiber patterned look, the edges of carbon fiber handlebars mtb are well done, there are no exposed seams or sharp parts, and the installation and alignment marks are easy to see. bicycle riser handlebars 31.8 center has a good anti-slip coating. riser handlebars mountain bike are also perfect in size to mount related bike accessories..
EASY TO INSTALL - When installing RXL SL downhill bike handlebars, make sure that bicycle handlebar 31.8 must fit on the 31.8mm bike stem. carbon fiber handlebars 31.8 has a torque value of 4Nm and a maximum torque of 5Nm. Just gradually tighten the handlebars, alternating. Tighten until carbon downhill handleb....

Check Stock

Mountain Bike Handlebars MTB Handlebars MTB Bike 31.8 Handlebar Carbon Fiber 680mm Handlebars 3K Matt MTB Bars Red Riser Handlebars Lightweight Straight Mountain Bike Bars for Downhill MTN Bike

... or riding the bike. The more handgrip you have, the easier you may control the bike, especially while riding on bumpy or gravel roads. Besides, mtb carbon handlebar is also easier for you to maintain the brake cables and also the gear..
GOOD FLEXIBILITY: The straight handlebar is more flexible than the swallow 31.8 riser handlebar, carbon fiber mountain bike handlebars is easier to exert force, carbon mtb handlebar don’t need as much flexibility to use, mtb carbon fiber handlebar can help keep your eyes"up"making it easier to see what’s coming up and they can make riding with a backpack easier..
EASY TO INSTALL: When installing rxl sl carbon handlebars, please measure and confirm the diameter before ordering. The diameter of carbon fiber mtb handlebars must be the same as that of the stem. please do make sure 31.8mm mountain bike carbon handlebars must be installed with 31.8mm bike stem..

Check Stock

Bynccea 31.8mm 70 Degree Adjustable MTB Stem 90/110/145mm Bike Stem Aluminum Alloy Handlebar Riser Extender for Road Bike, Mountain Bike, BMX

Perfect Design: Bynccea Bike Stem constructed of precision 3D Forged alloy, to create the strongest, lightest, most secure bicycle adjustable stem available..
Adjustable angle: -70°~ +70°Adjustable Stem can help you raise or lower the height of the handlebar to improve your position or comfort as you ride,so as to obtain a more comfortable riding experience..
Compatibility: Only Fit for Handlebar diameter 31.8mm (1-1/4''), front fork stem diameter 28.6mm (1-1/8") and is available in a range of lengths 90mm, 110mm and 145mm..
Easy Installation: Just connect up the bike stem riser to original front fork stem..
Universal: Suitable for a wide variety of Bikes, MTB mountain bike, road bike, fixed gear bicycle, BMX, etc..

Check Stock

MTB Handlebars, Mountain Bike Handlebars, MTB Bars Riser Handlebars 31.8, Carbon Fiber 720mm 740mm 760mm MTN Bike Handlebars MTB Handle Bars(Red pro 3K, 720mm)

...NING: Say goodbye to sore hands, wrists, back, and neck and say hello to increased control and a super smooth ride – Wide 720mm handlebars can handle really rough stuff, Lots of rocks, roots, drop offs and crashes. Long 31.8 handlebar take some of the vibration and hits better out of gravel and dirt paths, carbon riser 31.8 is awesome for super-commuting, gravel road bombing. mountain bike riser handlebars carbon is the perfect choose for Enduro, Downhill,Dirt,XC.
NICE FINISHED: Awesome carbon fiber pattern looks – carbon urban riser bars mtb made very clean and look nice with 3K matt, Edges of mountain bike tall bars are finished nicely, no exposed seams or sharp bits.Mounting and alignment marks are easy to see. A good non slip coating on the center of the bar. The carbon handlebars mountain bike also dimensionally perfect for headset mount and all attachments..
EASY TO INSTALL - When installing RXL SL 720mm riser bar, please do make sure 31.8mm 720mm mountain bike bars must be installed with 31.8mm bike stem. This high rise handlebars 31.8 torque values is 4Nm and Max Torque is 5Nm.just tighten downhill handlebar gradually, alternating them.Tighten until it stops moving, then a smidge more,you also can put carbon fiber assembly paste on fixie st....

Check Stock

Azarxis Bike Fork Stem Extender Bicycle Handlebar Riser Adaptor Aluminium Alloy Head up Adapter Flexible Easy Installation Suitable for Mountain Bike, Road Bike, MTB (Pure Black, 4.83 Inch)

‍♂️ FUNCTIONAL GASKETS: The bicycle neck extender is equipped with 4 washers, 3 x 10mm and 1 x 5mm, which increases the height to 85mm.
‍♂️ ADJUSTABLE: The height of the extender can be adjusted by adjusting the number and type of spacers, reducing the pressure of waist effectively, biking more relaxed. Take the discomfort away from your upper back, neck and wrist.
‍♂️ HIGH STRENGTH & EASY TO OPERATE: The bicycle fork extender is made of refined 6061 aluminum alloy material. After T4 heat treatment + T6 heat treatment, the handlebar extender is stronger, more resistant to oxidation and corrosion, not easy to loose, and safer to use.
‍♂️ EASY INSTALLATION & WIDELY COMPATIBLE: Just connect the original front fork to complete the installation. Our bicycle Fork Stem Extenders are suitable for most MTB mountain bikes, road bikes and more.
‍♂️ CYCLING COMFORTABLY: Handling more flexible, much easier to force when climbing, lighter weight, comfortable and convenient to operate, effective bicycle fork extender.

Check Stock

GEWAGE Bike Stem - 130 Degree Adjustable Bicycle Stem- 75mm 90mm 130mm Handlebar Stem Riser for 31.8(1-1/4\) Handlebars, Suitable for Most of Mountain Bike, Road Bike, BMX

...angle adjustable according to your habits, the Adjustable Stem It can help you raise or lower the height of the handlebars to improve your position or comfort as you ride. so as to obtain a more comfortable riding experience.
【EASY INSTALLATION】- The bicycle stem is easy to install, Just connect up the bike stem riser to original front fork stem. Four bolt bar clamp holds bar securely in position. Increasing the friction between the card slot and the handlebar can effectively avoid the impact of vibration and loss of control during riding..
【3D FORGED ALLOY】- Bicycle handlebar stem Made of high quality 3D Forged aluminum alloy, sturdy and durable, not easy to deform and rust,Matt black finishing makes it extremely easy to wipe off and clean,Suitable for most MTB mountain bikes, road bikes, fixed gear bicycles, BMX, etc. Come DIY to upgrade your bike for a more comfortable riding experience.

Check Stock

Lixada Bike Stem Riser Bike Fork Stem Extender Handlebar Riser Adapter Suitable for Mountain Bike Road Bike MTB ect Aluminium Alloy Adjustable Black

【MAXIMUM HEIGHT EXTENTION】: 180mm (7 inch)-- Include 6 gaskets, 2 x 20mm (4/5 inch), 3 x 10mm (2/5 inch) and 1 x 5mm (1/5 inch). 115mm (4.5....
【HIGH QUALITY MATERIAL】Anodized aluminum alloy construction, solid and strong. Help to extend the fork stem by 1.3-3.7in. Strong in anti-corrosion....
【EASY INSTALL&SAFE】：Easy installation, just connect up the original front fork stem. For 28.6mm front fork. Solid and firm handlebar extender....
【AJUSTABLE HEIGHT】：Adjust the height of your handlebar properly makes it easier to hold traction on the steep hill. Handling more flexible,....
【RIDING MORE RELAXED】：The stem riser can adjust the gasket to fit your need freely, reducing the pressure of waist effectively, biking more....

Check Stock

baluoqi Bike Headset Top Cap Aluminum Alloy Headset Star Nut Stem Cap Fits 1-1/8\ Stems and Forks(Yellow)

★Size：Stem spacers road bike inner diameter is 28.6mm，1-1/8" headset spacer set, compatible with 28.6mm front stem fork of MTB, BMX, mountain bike, road bike etc..
★Material : Aluminum Alloy MTB Headset Spacer,Stainless Bicycle Fork Headset Star Nut, Titanium Bolt .Bicycle headset spacers threadless are made of black anodized aluminum alloy material with smooth surface and exquisite workmanship, eco-friendly, sturdy and durable to use.
★Exquisite Workmanship:The Bike Top cap Comes anodized in Black, Blue, Yellow and Red,colorfast surface,Ultra Precision Diamond Blade Machine Cut,great anti-corrosion. Beatiful Color,Stand out from the crowd..
★Package: there are 8PCS for you to choose, you can select part of them as to your need:Aluminum MTB Stem Spacer *8pcs(10mm*4,5mm*1,3mm*1, 2mm*2---the yellow only contains 5pcs),headset star nuts*1,Stem Top Cap Cover*1,Headset Bolt*1.
★ Warranty: high quality, 2 year warranty ,100% refund or replacement if there is any quality problem.

Check Stock

RXL SL Bike Stems, MTB Stem 31.8, Carbon Mountain Bike Stem 130mm 6 Degree, Lightweight Road Bike Stem, Shock-Absorbing Bike Handlebar Stem for Fixie Bike, Gravel Bike, Hybrid Bike, and E-Bikes

UNIVERSAL COMPATIBILITY - rxl carbon stem fits universal 31.8mm handlebars, handlebar stem comes size +/-6 degree angle in 70/80/90/100/110/120/130mm lengths (center distance of the two holes) and a +/-17 degree angle in 70/80/90/100/110/120/130mm lengths (center distance of the two holes). This dirt bike stem fits standard 1-1/8" (28.6mm) steerer tubes,the size used by most modern bikes..
LIGHTWEIGHT AND STURDY - rxl sl carbon stem made by 3K carbon fiber + aluminum alloy (the face plate is made of high quality aluminum alloy), very nice looking, 31.8 stem weight:Approx 120~148g. very solid build, which is really what you want for strength, fixie handlebar stem helps to lift your handlebars while not adding significant weight to your bike..
ERGNOMIC & REDUCE FATIGUE - 31.8 road bike stem let you ride in a more upright position with perfect rise and length, carbon mtb stem dampens bumps and vibrations transfer from the road,which reduce neck/back issues and enable you to go further and faster. carbon stem 130 let you have a increased control, more confidence, and super smooth ride..
ABSORBS VIBRATIONS - mtb stem 31.8mm absorbs some impacts and help dampen some road vibrations when you ride on gravel and some light single track, bicycle stem 31.8mm is a ....

Check Stock

GANOPPER Bike Stem 31.8 70mm 35 Degree Bar Clamp 31.8mm Mountain Bike Handlebar Stem Riser with 25.4 Bicycle Handlebar Shim

【Specification】:Angle:±35°,Handlebar diameter: 31.8mm (1-1/4"), Steerer Tube diameter: 28.6mm (1-1/8"),Stack Height:42mm, Length: 70mm (center distance of the two holes),Weight: Approx 125g(0.27 lbs).
【Feature】：Universal 31.8 to 25.4 Bicycle Stem Shim, 31.8 Mountain Bike Handlebar Stem can refit into 25.4mm(1") Stem for Fixie Bike,Kids Bike Part etc.,.
【Material】: High Quality Alloy Aluminium AL6061,T6 Heated Treatment, Lightweight.Color: Black.
【Applicaiton】：Suitable for most MTB mountain bikes, road bike, fixed gear bicycle, BMX ,DH ,AM ,FR ,XC Dirt Jump Bike etc. Best choice for cyclists, DIY upgrade the bike for more comfortable ride..
【Package Content】: 31.8 MTB Stem×1, Bike Stem Shim×1(31.8 to 25.4 Stem Adapter).

Check Stock

Genesis V2100 Men s Dual Suspension Mountain Bike Slate Gray

Alloy micro adjust 27.2 X 300mm seat post with quick-release.
Shimano EF40 integrated aluminum brake levers.

Check Stock

Bar Fly 4 MTB Bicycle Accessory Mount, Black, for Flat-Bars - Garmin, Wahoo, Polar, Bryton, Cateye, Mio, Joule

Clean up your cockpit: BF 4 MTB mounts a computer, camera or light on your bike’s stem using minimal handlebar space. Only 1 accessory can be mounted at a time.
cannot run computer simultaneously with light or camera. Compatible with all sized computers.
Computer & Camera Compatibility: BF 4 MTB includes replaceable heads for Garmin mount, Wahoo mount, Bryton, Cateye, Polar, Mio & Joule computers. GoPro base (3-fins) can hold a GoPro mount camera or any camera or light with a GoPro (2-fins) adapter.
Handlebar & Light Compatibility: BF4 MTB is compatible with 35mm diameter bars.
with a shim for 31.8mm. 12mm of clamping space on the right side of stem is needed. Universal Light Mount can hold a flashlight up to 1” diameter using silicone bands.
Durable Construction – BF4 MTB is created from advanced injection moulded co-polymer. It is strong enough to keep your electronics where you want them on your bicycle no matter how bumpy the terrain.
In the Box: 4 MTB bike mount (computer mount) comes with 7 Computer heads: Garmin, Polar, Wahoo, Mio, Joule, Cateye, Bryton, GoPro Base, Universal Light Mount, and shim for 31.8 handlebars.

Check Stock