Top Moving Coil Phono Preamp Reviews

Nobsound T3 MM Phono Preamp Record Player Preamplifier HiFi Turntable Amplifier

T3 phono preamp is designed for home MM(moving magnet) turntable record players to convert phono signals to line level signals. It is only a preamp,....
With volume control, higher amplification times can make best use of your record player performance..
Adopting pure copper GND and gold-plated RCA terminals, low-noise integrated circuits and high quality components to remove low frequency noise and....
Mini size with attractive appearance, power switch with red indicator makes it fashionable, metal aluminum case can prevent vibrations and....

Check Stock

Cambridge Audio Alva Solo | Phono Preamp for Moving Magnet Turntable

✓ DESIGNED FOR VINYL – Cambridge Audio’s Alva Solo is a dedicated moving magnet phono preamp designed to give you a superb sonic experience from....
✓ ATTENTION TO DETAIL – The Alva Duo's switch mode power supply and surface mount technology delivers short signal paths and a faster response....
✓ SUBSONIC FILTER & BALANCE CONTROL – The Alva Solo will even work if your vinyls are a little worse for wear. The subsonic filter and balance....
✓ GREAT ADDITION TO ANY AMP – The Alva Solo is a perfect for your amp that doesn’t have a phono preamp built in or a great upgrade for your amp....
✓ TECH SPECS - MAX POWER CONSUMPTION 10W, GAIN @ 1KHZ 39dB, NOMINAL OUTPUT 300mV, SENSITIVITY FOR NOMINAL OUTPUT 3.35mV, EQUIVALENT INPUT NOISE....

Check Stock

Phono Turntable Preamp, Phonograph Preamplifier with RCA Input, RCA/TRS Output, Phono Preamp for Turntable Record Play with 12 Volt DC Adapter

Convert Phono Signal：The Turntable Preamp Converts phono signals to line level for better sounding audio and volume.This state-of-the-art phono preamp can accommodate all magnetic pickups..
Low Noise Operation: The Turntable Preamp offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers.Make your vinyl records deliver sound exactly as it’s read from your turntable’s needle..
RCA Input & RCA /TRS Output: This Mini Preamp has stereo RCA inputs , stereo RCA and TRS outputs. Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA/ TRS outputs(DC 12V Adapter is included)..
Simple Plug & Play:Connect any Phono Turntable Preamps to modern sound equipment without specialized phono input for amplifying music.Simply hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time..
1 Year Warrranty: We guarantee this Electric Phono Preamplifier with both a 30-day, no hassle money back return policy and a 1 year manufacturer’s guarantee..

Check Stock

Fool 4 You

【Converts MM Turntable Signals】: BOX X1 compact ultra-low noise phono preamp converts phono signals to line-level signals. Designed with a....
【MM Phono Preamplifier with DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV,....
【RCA Output & 3.5MM Headphone Output】: BOX X1 supports MM turntable input, 3.5MM headphone output, and RCA line output for powered speakers. You....
【Amplify Vinyl Records to Interface with Your Home Stereo System】:The built-in low noise phono preamp circuitry is highly accurate and precisely....
【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, our worry-free 18-month warranty, and friendly customer service..

Check Stock

Phono Turntable Preamp, Phono Preamp for Turntable, Record Play, Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA/TRS Output, Phono Preamp with 12 Volt DC Adapter

Convert Phono Signal：The Turntable Preamp Converts phono signals to line level for better sounding audio and volume.This state-of-the-art phono preamp can accommodate all magnetic pickups.
Low Noise Operation: The Turntable Preamp offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers.Make your vinyl records deliver sound exactly as it’s read from your turntable’s needle.
RCA Input & RCA /TRS Output: This Mini Preamp has stereo RCA inputs , stereo RCA and TRS outputs. Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA/ TRS outputs(DC 12V Adapter is included).
Simple Plug & Play:Connect any Phono Turntable Preamps to modern sound equipment without specialized phono input for amplifying music.Simply hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time.
1 Year Warrranty: DIGITNOW guarantee this Electric Phono Preamplifier with both a 30-day, no hassle money back return policy and a 1 year manufacturer’s guarantee.

Check Stock

Music Hall Mini Plus Low Noise Phono Pre-Amp for Moving-Magnet and High-Output Moving-Coil Cartridges

Ultra-low noise design ensures high-fidelity audio playback from your vinyl records Adjustable gain trim control lets you easily fine-tune the audio output to match your audio system and listening preferences.
Compatible with moving magnet and high-output moving coil cartridges allowing you to enjoy a wide range of vinyl records Adjustable cartridge load capacitance allows you to customize the sound to your liking.
High-grade headphone amplifier provides powerful and clear audio playback Gold-plated RCA inputs and outputs offer high-quality connections for your audio components.
Compact size and energy-efficient power supply make it easy to integrate into your home audio system Worldwide compatibility means you can use the Mini Plus phono preamp no matter where you are.
Rigid chassis construction and vibration damping feet help to reduce unwanted vibrations and noise.

Check Stock

Kinter PR400 Ultra Compact Phono Vinyl Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with Gold Plated RCA Input and Outputs & Low Noise Operation 12 Volt DC Adapter Included

PERFECT FOR PHONO/TURNTABLES: A turntable phono preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp accommodates magnetic pickups with an input sensitivity of 3mV at 50K Ohms..
LOW NOISE OPERATION: Offers outstanding value and performance with a Low-Noise Audio Operational Amplifiers. Integrated circuitry accommodates Magnetic Pickups. The output is 2V max (P-P) at 10K Ohms. PLEASE NOTE: The PR400 Preamp should be located close to the source (turntable) to reduce the possibility of unwanted noise and outside interference impacting the signal quality..
SIMPLE PLUG & PLAY: The PR400 Mini Phono Preamp has gold plated stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and attach the ground wire from your turntable to the grounding screw found on the preamp. Connect the amplifier or receiver to the RCA outputs of the preamp and you’re ready to spin up some vinyl. Simple as that!.
POWER ADAPTER INCLUDED: 12VDC power adapter tested for quiet operation and soft Orange LED Power indicator on the PR400 preamp indicates the unit is powered on and ready to convert signal..
GOLD PLATED RCA CONNECTORS: reduces the possibility of corrosion which could cause signal loss and nonlinearity ....

Check Stock

Better Sound from your Phonograph: How come? How-to!

CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.

Check Stock

Music Hall pa2.2 MM/MC Phono Preamplifier with Analog to Digital Converter

The upgraded version of Fosi Audio BOX X2. NEW-generation phono preamp for unrivaled sound quality..
JAN 5654W Tube MM Phono Preamplifier: The BOX X4 phono preamp supports 3.5MM AUX and MM turntable input, converting phono signals to Line Level....
Tube Headphone Amplifier & Preamplifier: The BOX X4 is designed with a 3.5MM AUX headphone and RCA output, highly useful beyond imagination..
Applicable Vacuum Tube Model: 6K4/6J1/6J4/GE5654/6AK5/66*In vacuum tubes, etc. You can replace the vacuum tubes to DIY your stereo system. Different....
What You Get: BOX X4 phono preamp, DC 12V power supply, user manual, our worry-free 18-month warranty, and friendly customer service..

Check Stock

Nobsound Little Bear T7 Vacumn Tube Mini Phono Stage RIAA MM Turntable Preamp & HiFi Tube Pre-Amplifier (Silver)

CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.

Check Stock

DYNASTY PROAUDIO UA2D USB Phono Preamp for Turntable, Preamp with RIAA Equalized Low Noise Moving Magnet A/D Converter (Power Adaptor & USB Cable Included)

✅The Dynasty ProAudio UA2D has the ability to be connected with all kinds of turntables with moving magnet (MM) cart- ridge or line level audio devices (tape recorders etc. ), easily transfer and convert from your favor albums vinyl records to your computer or laptop into a digital format file for organization..
✅High performance USB audio interface Integrated, built-in with a premium circuit technology and components phono preamp that allow you to amplify an RIAA equalized low noise Phono and Line level audio signals. Simply connect it to your desktop and laptop computer’s USB port for recording with true-to-original sound and no quality loss..
✅The Dynasty ProAudio comes with USB audio driver technology that ensures latency free operation to a new level, which supports 48/44. 1 KHz sampling rate for both monitoring and recording..
✅Can be used as a Phono preamp for any vinyl playback system, amplifies the signal from your turntable to levels that allow you to connect it to your sound system..

Check Stock

Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter (PP444),Gray

CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference.
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more.
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs.
1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee.

Check Stock

Pyle Output PP777 Phono Turntable Preamp Mini Electronic Audio Stereo Phonograph Preamplifier Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter

CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference..
CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more..
SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs. It also comes with a 12DC adaptor.
1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee..

Check Stock