Top Mounting Dots Reviews

Mossberg 500/590 Series Shotgun Picatinny Rail Mount

  • Picatinny rail mount for Mossberg 500 and 590 Series and equivalent shotguns.
  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
  • Installs via included set screws into the Mossberg factory mounting holes.
  • Crafted from lightweight aluminum, 5.4 inches in length and 1.4 ounces in weight.
Check Stock

Ruger 10/22 Picatinny Rail Mount for Scopes and Optics

  • Picatinny rail mount for Ruger 10/22 model rifles.
  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
  • Installs via included set screws into the Ruger 10/22 factory mounting holes.
  • Crafted from lightweight aluminum, 4.5 inches in length and 1.1 ounces in weight.
Check Stock

The Power of 22: Stories of Manifestations, visions & intuitive guidance

  • Picatinny rail mount for Ruger 10/22 model rifles.
  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
  • Installs via included set screws into the Ruger 10/22 factory mounting holes.
  • Crafted from lightweight aluminum, 4.5 inches in length and 1.1 ounces in weight.
Check Stock

Monstrum Raven 1.5X Prism Scope | Black

  • The Monstrum Raven 1.5x Prism Scope is a prism scope optic with a fixed 1.5x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produce less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Raven 1.5x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Monstrum Blackbird V2 1.5X Prism Scope | Black

  • The Monstrum Blackbird 1.5x Prism Scope is a prism scope optic with a fixed 1.5x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Blackbird 1.5x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Monstrum Marksman 1X Prism Scope | Flat Dark Earth

  • The Monstrum Marksman 1x Prism Scope is a prism scope optic with a true fixed 1x magnification.
  • Offers similar functionality to 1x red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Built atop the same platform as our 3x Marksman prism scope, it comes with an integrated 1.5 inch riser mount for true co-witnessing with your front sight and mounts to any standard picatinny mounting platform.
  • The Marksman 1x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

96 Pieces Adhesive Poster Tacky Putty Non-Toxic Mounting Putty Reusable Removable Safe Sticky Tack Putty for Poster and Museum, Art Photography (Pink)

  • Mounting Tack Putty: Made of high-quality materials, safe, non-toxic, has strong adhesion, and is reusable. Mainly used for pasting lighter things or temporary pasting decorations. The poster putty is only suitable for most dry-clean surfaces, such as wood, tile, metal, plastic etc. Not recommended for using on flocked or loose wallpaper and on peeling or fresh paint. Hanging of heavier objects and glass items is not recommended..
  • Wide Application: Ideal for sticking lighter things like hanging pictures, posters, notes, party decorations, memos, ornaments, children's artwork, party decorations, nail art in art galleries, museums, libraries and offices. A perfect replacement of thumbtacks, tapes, staples, etc..
  • Easy to Use: Take the tack putty of the size you want each time, and knead it by your clean oil-free hands to make it soft and sticky, then put it on the back or bottom of the item, and press mounting putty tightly on a clean and dry surface. When remove it, just roll it off where it was pasted..
  • Double Sided Adhesive Dots: Made of strong acrylic material, sturdy and durable.1cm (0.39 inch) in diameter and 1mm (0.04 inch) thick round adhesive dots(160 pieces). It is safe to fix and paste small light things, such as your photos, envelope, post....
Check Stock

Monstrum 45 Degree Offset Micro Red Dot Mount | Compatible with Venom/Viper/Fastfire/Docter Standard Red Dots

  • For 45 degree offset mounting of a micro red dot sight to your picatinny mounting platform.
  • Compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red dots. Please refer to compatibility chart before purchasing..
  • Red dot mount attaches directly to your red dot base using the Docter/Noblex red dot footprint pattern.
  • 45 degree offset design allows for the mounting of a secondary sighting system.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Ruger 10/22 Picatinny Rail Mount with Integrated Level Bubble

  • Picatinny rail mount for Ruger 10/22 model rifles with integrated level bubble.
  • Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics.
  • Installs via included set screws into the Ruger 10/22 factory mounting holes.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • Crafted from lightweight aluminum, 4.5 inches in length and 1.1 ounces in weight.
Check Stock

UYUYHJS Ruger 10/22 Picatinny Rail Mount for Scopes and Optics, Included 5 Hardened Steel Torx Screws and Torx-L Key Tamperproof Allen Wrench,Ruger 10 22 Accessories,Easy Install.

  • Picatinny rail mount for Ruger 10/22 model rifles,Allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics,Fits All Ruger 10/22 Models:Takedown, Carbine, Target, Compact, Sporter, Collector's, Tactical, and 50th Anniversary..
  • Installs via included set screws into the Ruger 10/22 factory mounting holes,easily without any modifications required..
  • Light in Weight, Yet Strong and Durable：Crafted from lightweight 6061T6 Aircraft Grade Aluminum, 4.6 inches in length and 1.2 ounces in weight,anodized on the surface, matt black..
  • Comfortably fit your red dots, compact scopes, and even short-mid range rifle scopes on to your Ruger 10/22.The rail sections are compatible with all Picatinny or Weaver based optics..
  • Our products provide lifetime warranty. Any dissatisfaction, please feel free to contact us at any time, our friendly customer service always stands behind our products and responds to all emails within 24 hours..
Check Stock

Montrum 90 Degree Offset Picatinny Rail Mount

  • For 90 degree offset attachment of picatinny optics or accessories to Picatinnny mounting platforms.
  • 90 degree offset design allows for the mounting of a secondary sighting system or for more flexibility in accessory placement.
  • Picatinny rail section is 4 slots in length and will accommodate all standard Picatinny accessories, red dots, or optics.
  • Mount a magnification scope up top for medium range shooting and a red dot at a 90 degree angle for close quarter combat. Or mount your flashlight to....
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Side Mounted 12 Gauge Shotgun Shell Holder with Picatinny Rail Mount for Drilled and Tapped Remington 870 Model Receivers

  • Combination shell holder/optics rail mount for Remington 870 Express Tactical Shotgun models.
  • Mounts to Remington 870 Express Tactical shotguns or other models with drilled and tapped receivers using the factory mounting holes on top of receiver.
  • For installation on Remington shotgun models without the factory mounting holes, we recommend installation by a professional gunsmith..
  • Accomodates up to six 12 gauge shotgun shells.
  • Rail mount allows for the mounting of Picatinny or Weaver standard scopes, red dots, or other optics.
Check Stock