Top Motor Operated Ball Valve Reviews

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.

Check Stock

R134A R410A R12 R22 Refrigeration Charging Hose Set with Ball Valve 3 Color Coded Hoses/w Ball Valve 1/4 SAE Thread Connector for Air Condition Refrigeration Charging Tools AC HVAC Maintenance Kit

WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R134A, R22, R12, R502, R404..
HIGH WROKING PRESSURE --- 7" length ball valve hvac charging hose completed with solid brass manual shut-off ball valve. Rated working pressure: 3000....
PREFECT DESIGN --- HVAC hoses with ball valves designed to meet standard 1/4 inch SAE female refrigerant charging hoses set with shut off of red, blue....
EASY INSTALLATION --- R22 charging hose and ball valve set design with 45 degree angle on the service port site for easier access. Can be operated....
PREMIUM QUALITY --- Refrigerant hose made of high-quality brass alloy and rubber, last long. Strong sealing for durability and safety. Necessary tools....

Check Stock

TOPWAY 1.5HP Stainless steel Submersible Clean/Dirty Water Sump Pump Garden Pond with Float Switch

【Function】Environmentally Sound: Bolted construction for leak-free fluid handling. Efficiency: Motor design delivers optimum air efficiency. Reliability: "Unbalanced" air valve ensures no-stall operation..
【Solid Construction】Rugged construction - resists corrosion for reliable performance and long life. Bolted construction is designed for leak-free fluid handling. Easy access to ball checks and fluid caps for maintenance and repairs..
【Application】The diaphragm pump with convenient operating are widely used in various industries, such as petroleum, metallurgy, mining, coating material, printing, paper making, water treatment, automotive etc..
【Guarantee】This item will ship from USA, delivery time need about 5-8 days. Your satisfaction is our ultimate goal. If there is any questions please feel free to contact with us, MONIPA will spare no effort to help you..

Check Stock

Whirlpool Part Number W10122502: Icemaker Assembly

THIS WHIRLPOOL W10122502 ICEMAKER USES AN ELECTRIC MOTOR, AN ELECTRONICALLY OPERATED WATER VALVE.
AND AN ELECTRICAL HEATING UNIT. THIS ICE MAKER HOOKS UP TO THE PLUMBING LINE IN YOUR HOUSE TO.
PROVIDE FRESH WATER FOR ICE CUBES. THE WATER-FILL VALVE SUPPLIES HOUSEHOLD WATER TO THE ICE.
Works with the following models: Whirlpool 7GF6NFEXTY00, Whirlpool 7GS5FHAXTA02.
Whirlpool ED5FHAXSB03, Whirlpool ED5FHAXSL03, Whirlpool ED5FHAXSQ03, Whirlpool ED5FHAXSS03.

Check Stock

Goulds 7GS07 Submersible Water Well Pump End Only, 7 GPM, 3/4 HP Required, 13 Stages

Pump can be operated continuously without damage to the motor.
Discharge head/check valve made of cast 303 stainless steel for strength and durability.
Easy access to motor mounting nuts using standard open end wrench.
Hexagonal shaft design for positive impeller drive.
Proprietary engineered polymer bearing is strong and resistant to abrasion and wear.

Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..

Check Stock

Goulds 5GS05422C Submersible Water Well Pump, 5 GPM, ½ HP, 12 Stages, 2 Wire, 230 V Control Box is NOT REQUIRED.

Pump can be operated continuously without damage to the motor.
Discharge head/check valve made of cast 303 stainless steel for strength and durability.
Easy access to motor mounting nuts using standard open end wrench.
Hexagonal shaft design for positive impeller drive.
Proprietary engineered polymer bearing is strong and resistant to abrasion and wear.

Check Stock

Makita AC001 Compact Air Compressor

Powerful 1/6 maximum horsepower induction motor provides up to 125 PSI.
Lightweight design (23.1 lbs.) for increased job site portability.
Low AMP draw reduces incidents of tripped breakers at start-up. Lever-handle ball valve tank drain improves easier maintenance and air tank release.
Roll cage construction for extra protection of pump and motor assembly.

Check Stock

Laing 6050E4050 Act-4 Hot Water Recirculating Pump

E-series pump with energy efficient ECM based permanent magnet motor.
Operates on as little as 20 watts Operated via wireless communication.
Temperature and Timer controlled Optional Push Button Start.
No electrical outlet required under the sink No recirculation line needed.

Check Stock

6RPM Rotating Motor with LED Lights and Party Lights with Remote Control, Electric 4 Colors Mirror Ball Motor RGB Disco Ball Lamps Sound Activated Disco Light for Home Room Birthday DJ Birthday Club

...rotating, sound activated LED shining while rotating.
And the RGB disco ball has 3 control modes, namely sound activated, automatic mode and remote control, and 7 different lighting modes, you can choose the proper mode to use according to actual needs.
Convenient to Apply: the 6RPM rotating motor with LED Lights is operated by 3AA battery (not included), allowing your guests and friends to fully enjoy the brilliant visual effect of the mirror ball.
The sound activated party light can be fixed on a flat place stably, plug in and apply, time saving and effective.
Create a Joyous and Festive Atmosphere: the LED disco ball is appliable for a variety of occasions, such as DJ, band, bar, club, birthday party, wedding, stage, banquet, nightclub and more, offering beautiful and bright lights, leaving an unforgettable memory.
Considerate Package for Night Party: the package contains a disco ball motor and a disco ball light, lightweight and portable, with dazzling and colorful lights, ideal supplies for cheering and exciting occasions, able to create a gorgeous atmosphere.

Check Stock

Goulds 7GS15412C Submersible Water Well Pump, 7 GPM, 1-1/2 Horsepower, 3 Wire, 230 Volts, 22 Stages, Single Phase. Control Box is INCLUDED.

Pump can be operated continuously without damage to the motor.
Discharge head/check valve made of cast 303 stainless steel for strength and durability.
Easy access to motor mounting nuts using standard open end wrench.
Hexagonal shaft design for positive impeller drive.
Proprietary engineered polymer bearing is strong and resistant to abrasion and wear.

Check Stock

Zooz Z-Wave Plus 700 Series Titan Water Valve Actuator ZAC36 | Compatible with SmartThings

...ctor to monitor water presence around it. It will work offline with the probe connected directly to the Titan but the device works best when included to a compatible Z-Wave hub (sold separately) for full wireless functionality..
EXTREMELY STRONG: Unlike other retrofit solutions, the Titan is equipped with a powerful motor that opens and closes even the most stubborn valve reliably. It calibrates on each individual valve once installed for optimal performance..
DIY INSTALLATION: You don't need any tools and it takes just a few minutes to mount and calibrate the device. You can use it outdoors too! Follow the steps in the manual and installation video carefully when installing the product. Check your set-up before buying: suitable for 0.5" - 1.25" ball valves only.
3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall..
Z-WAVE COMPATIBLE: Get the most of your Titan Valve Actuator when you include it to your Z-Wave hub. Program it to shut the water off if water is detected on any of your wireless leak sensors (sold separately) for complete protection. The Titan is compatible with SmartThings, Hubitat, Ring Alarm (partial integration on....

Check Stock

R134A R410A R22 R12 Charging Hoses and Ball Valve Set, 3 Pcs Color Coded Hoses/w Ball Valve 1/4" SAE Thread (7" Long) for AC HVAC Maintenance Kit and Air Condition Refrigeration Charging Tools

WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R410A,R22,R134a,R12..
HIGH WROKING PRESSURE --- 7" Long Charging Hose Completed with Solid Brass Manual Shut-off Ball Valve. Rated working pressure: 3000 psi burst / 600 psi Max. working pressure..
WELL DESIGN --- Designed to meet standard 1/4" SAE female refrigerant charging hoses set with shut off of red, blue and yellow. Ball valve design with a quarter turn of the valve handle switch for controls refrigerant. Can be operated with one hand - Screws onto charging hose end..
PREMIUM QUALITY --- Made of heavy-duty solid metal for durable use. Valves are color coded on knobs 1-Red, 1-Blue & 1-Yellow..
ONE YEAR WARRANTY --- The HVAC, HVAC/r, A/C maintenance tools comply with one year warranty, should be there any question, please feel free to contact us..

Check Stock