Top Mono Block Amps Reviews

KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp

  • CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!.
  • A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love..
  • Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!.
  • CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!.
  • These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal..
Check Stock

JL Audio XD1000/1v2 Monoblock Class D 1000W Subwoofer Amplifier

  • 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms) variable low-pass filter (50-500 Hz, 12 or 24dB/octave) switchable subsonic filter (30 Hz, 24 dB/oct).
  • Class D amplifier design with NextD switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an.
  • preamp outputs auto turn-on via DC offset or signal sensing 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier.
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 14-3/4"W x 2"H x 7-1/8"D.
Check Stock

Rockville RV10.2B 1000w Dual 10' Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit.
  • Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones.
  • 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B..
  • High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable.
Check Stock

Neewer 1-Button Footswitch with 1/4” Mono Male to Male Cable, Ideal for Guitar Bass Amplifiers

  • 【1-Button Footswitch】 Connect the single-button footswitch to a standard mono 1/4” input using the 1/4” mono male to male cable. Perfect for novice and professional musicians.
  • 【Channel Switching】 A handy channel switcher for guitar, bass. Compatible with a wide range of guitar amps with on/off switching capability.
  • 【Control the Circuit】 The push-button switch and the included 1/4” mono to 1/4” mono cable make it easy to connect or break the circuit remotely. Also works with any standard audio cables with 1/4” mono plugs.
  • 【Metal Button】 The button is made of metal to provide durability.
  • 【Notes】 This footswitch can be used with guitar amplifiers that feature footswitch connection (a 1/4” jack). It controls only a single channel (not dual channels). The guitar and the stool shown in the pictures are not included.
Check Stock

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock

Rockville RV12.2B 1200W Dual 12 Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit.
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design..
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers..
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B..
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder.
Check Stock

Rockville RV8.2A 800 Watt Dual 8\ Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

  • Rockville RV8.2A Single 8" Bass Enclosure System With matching Mono Block Amplifier.
  • 800 Watts Peak Power / 250 Watts RMS CEA-2031 Rating.
  • Dual 8" Bass Enclosure System with matching Mono Block Amplifier.
  • Quasi Transmission Line Cabinet Design. Fully adjustable low pass crossover: 50Hz - 250Hz.
  • Bonded, Stapled and Braced 3/5" MDF Cabinet.
Check Stock

Seismic Audio 6 Inch 1/4 Inch TS Female to Dual RCA Male Y-Splitter Cable-Interface Cord (SA-Y13)

  • Contents: 6 Inch 1/4" Mono Female to Dual RCA Male Patch Cable.
  • Application: Interfacing and connecting receivers, audio players, amps and other audio gear.
  • Connectors: 1/4 Inch Mono Female on one end, Dual RCA Male on the other end.
  • Features: Nickel Plated Connectors, Strain Relief on both ends.
Check Stock

KICKER Comp RT 12 Inch Thin Down Firing Enclosure Package with 46CXA4001 Amplifier and Wire kit

  • Bundle includes: Kicker 48TRTP122 TRTP 12-inch Thin Down Firing Subwoofer and Passive Radiator Enclosure, Kicker 46CXA4001 400-Watt Mono Amp, Kicker 47VK6 6AWG Wiring Kit.
  • 48TRTP122 - Extremely Compact Design with Drivers Hidden, Becoming a Part of the Vehicle’s Makeup.
  • 46CXA4001 - Variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want.
  • 47VK6 - Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables.
  • Optional subwoofer grilles and remote bass controllers available.
Check Stock

KICKER Comp R 12 Inch Dual Subwoofer in Vented Enclosure Package with 46CXA8001 Amplifier and Wire kit

  • Bundle includes: Kicker 48DCWR122 12" dual subs in vented enclosure, Kicker 46CXA8001 800-Watt Mono Sub Amp, Kicker 47VK6 VK6 6AWG Complete Amplifier Wiring Kit.
  • 48DCWR122 - SoloKon Cone System with Vented Back Bracing and Motor Cooling.
  • 46CXA8001 - Variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want.
  • 47VK6 - Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables.
  • Optional subwoofer grilles and remote bass controllers available.
Check Stock

Parts Express Cast Frame #10-32 Speaker Mounting Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound....
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16....
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
Check Stock

KICKER Comp RT 10 Inch 48TRTP102 Thin Down Firing Enclosure Package with 46CXA4001 Amplifier and Wire kit

  • Bundle includes: Kicker 48TRTP102 TRTP 10-inch Thin Down Firing Subwoofer and Passive Radiator Enclosure, Kicker 46CXA4001 400-Watt Mono Amp, Kicker 47VK6 6AWG Wiring Kit.
  • 48TRTP102 - Extremely Compact Design with Drivers Hidden, Becoming a Part of the Vehicle’s Makeup.
  • 46CXA4001 - Variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want.
  • 47VK6 - Top-Quality, Full-Spec, Hyper-Flex Power, Ground and Turn-On Cables.
  • Optional subwoofer grilles and remote bass controllers available.
Check Stock

(Red) 12 Terminal Distribution Block -BUSBAR- with Ring Terminals

  • 1/4″ Stud – 12 Terminal Red Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock