Top Mold resistant Thread Reviews

Igloo 120-Quart Yukon Seat Cushion, White/Charcoal/Red

  • Stainless steel snaps on all four sides attach securely to the lid.
  • Thick, upgraded foam-filled provides for 3-inches of comfort.
  • Heavy duty, water resistant vinyl treated with mold inhibitors to withstand conditions.
  • UV inhibitors in vinyl and thread guard against sun damage.
Check Stock

Igloo Yukon Seat Cushion 70-Quart

  • Stays in place, won't slide with stainless steel snaps on all four sides attach securely to the lid (mounting hardware for lid included).
  • Thick, upgraded foam-fill provides 3 Inch of comfort.
  • "Waterfall" cushion edge for ready watershed.
  • Heavy duty, water resistant vinyl treated with mold inhibitors to withstand marine conditions.
  • UV inhibitors in vinyl and thread guard against sun damage.
Check Stock

COMOWARE Center Drill Bit Set - Countersink Lathe Mill Tooling Set, HSS, M2

  • HIGH QUALITY CARBIDE MATERIAL: The center drill bit is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • PLAIN STYLE 60°ANGLE: Center drill bit can be used to process the centering hole and countersink of general material. Plain style 60°angle can guide twist drill bits to process holes..
  • SPIRAL FLUTE: Spiral groove helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. The precision ground surface is corrosion resistance to achieve better using effects and prolong the working life..
  • WIDE APPLICATIONS: It is suitable for mold steel, carbon steel, cast iron, stainless steel, thread mold, a material with high hardness, wear-resistance and toughness for precise positioning before drilling, so as to facilitate the efficiency of subsequent drilling..
  • SET INCLUDING & LIFETIME GUARANTEE: Total 5 pieces center bits(#1,#2,#3,#4,#5) with Box Package can be used to drill holes in different sizes. We stand behind all of our high quality products so we offer a lifetime No Question on our drill bits. Please contact us (through Amazon if past the standard r....
Check Stock

5/16-18 x .562, End Force-4 lbs, Inch, Delrin Nose-Light End Pressure, Steel Body, Locking Element, Stubby Spring Plunger (1 Each)

  • Value Pack: The package includes 2pcs hand-retractable spring plungers, basic and essential mechanical industry accessories and parts.
  • Size: 3/8 inch - 16 thread size, 0.44 inch thread length, 0.276 inch pin outer diameter.
  • Material: Made of high quality stainless steel, practical and durable, corrosion resistant.
  • Easy to Use: Lightweight, portable, convenient to carry and save space.
  • Wide Application: Can be used in mold, cabinet, electrical appliances, industrial equipment, automotive and some other fields.
Check Stock

10pcs Thread Repair Sleeves Reducer Nuts M8 Female and M12 Male Thread Conversion

  • USES - The repair nut is an industrial fastening part, which is mostly used with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, the repair nut can be used to repair the threaded hole in an efficient manner..
  • WIDE RANGE OF APPLICATION - These Repair Nuts are widely used in aviation, automobile, electronic communication, computer, mold, mechanical equipment and other manufacturing fields..
  • FEATURES - The thread size is standard, the thread is clear, and it will be more accurate for thread sliding tooth restoration..
  • FOR EXAMPLE - If the M8 thread is slippery, and if you want to continue to use the M8 thread after the restoration, use this method to first expand the M8 thread to the M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because the material of this reducing diameter is stainless steel, it will make the M8 thread more firm.
Check Stock

2 Packs Spring Plunger with Pull Ring, 1/2\- 13 Thread Size, 0.56\ Thread Length, Stainless Steel Non-Locking Type Stubby Hand-Retractable Spring Plunger Index Plunger

  • Value Pack: The package includes 2pcs hand-retractable spring plungers, basic and essential mechanical industry accessories and parts.
  • Size: 1/2 inch - 13 thread size, 0.56 inch thread length, 0.354 inch pin outer diameter.
  • Material: Made of high quality stainless steel, practical and durable, corrosion resistant.
  • Easy to Use: Lightweight, portable, convenient to carry and save space.
  • Wide Application: Can be used in mold, cabinet, electrical appliances, industrial equipment, automotive and some other fields.
Check Stock

Naiyong Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET , M35 HSS 5 % Cobalit Contained , Titanium Plated (1-5 mm)

  • TOP QUALITY CARBIDE MATERIAL: The center drill bit is made of Top quality HSSCO M35. Compared with ordinary high speed steel, M35 material can prolong the service life, enhance wear resistance and remove chippings clearly .Top quality Tatinum plated ..
  • PLAIN STYLE 60 ANGLE: Center drill bit can be used to process the centering hole and countersink of general material. Plain style 60째angle can guide twist drill bits to process holes..
  • SPIRAL FLUTE: Spiral groove helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. The precision ground surface is corrosion resistance to achieve better using effects and prolong the working life..
  • WIDE APPLICATIONS: Top quality Tatinum plated .It is suitable for mold steel, carbon steel, cast iron, stainless steel, thread mold, a material with high hardness, wear-resistance and toughness for precise positioning before drilling, so as to facilitate the efficiency of subsequent drilling..
  • NCLUDING & LIFETIME GUARANTEE: Total 1 Pack of 5 pieces center bits(#1,#2,#3,#4,#5) with Box Package can be used to drill holes in different sizes. We stand behind all of our high quality products so we offer a lifetime No Question on our drill bits. Please contact us (through A....
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

8MILELAKE Steering Wheel Remover and Lock Plate Compressor Set

  • Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Includes one forcing screw and four sets of cap screws needed for various thread requirements.
  • Contains 5 sets of cap screws to be used for various thread requirements..
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Resin Molds Silicone Kit for Wind Chime Casting RESIN TOUR Wind Chimes Epoxy Resin Molds with Craft Supplies for Home Décor Create Art DIY Wind-Bell Decorations Sun

  • Beautiful Wind Chime Resin Set -- Originally designed by RESIN TOUR, the diy wind chime resin set has three themes, the sun, the fairy, and the hummingbird. Package includes 5 x Silicone Molds, 3 x Hollow aluminum tube, 13 x Decorative beads, 40 x Positioning beads, 1 x clear nylon thread..
  • Easy to Assemble -- Our wind chime resin mold kit is easy to assemble, even if no experience. We also have assembly tutorials, please see the picture. Children who like wind chimes can improve their hands-on ability, enjoy the fun of DIY..
  • High-quality Materials -- Our resin silicone molds are made of high quality silicone, soft, reusable, washable. Crystal nylon thread is tough and not easy to break.The wind chime tube is made of aluminum, will not rust, and collide with resin pendants and beads to make a pleasant sound..
  • DIY Creative Projects -- This resin mold silicone kit is very suitable for DIY and creativity. You can add mica powder, gold leaf, glitter, dried flowers, etc. to get a beautiful finish. Turn your imagination into reality..
  • Widely Uesd -- You can use this silicone mold to make all kinds of wind chimes you like. The finish handcraft can be used as wall decor, wall photo hanging banner, window decoration,ideal gift etc..
Check Stock

Resin Molds Silicone Kit for Wind Chime Casting, RESIN TOUR Wind Chimes Epoxy Resin Molds with Craft Supplies for Home Décor Create Art DIY Wind-Bell Decorations (Moon)

  • Beautiful Wind Chime Resin Set -- Originally designed by RESIN TOUR, the diy wind chime resin set has three themes, the sun, the fairy, and the hummingbird. Package includes 5 x Silicone Molds, 3 x Hollow aluminum tube, 13 x Decorative beads, 40 x Positioning beads, 1 x clear nylon thread..
  • Easy to Assemble -- Our wind chime resin mold kit is easy to assemble, even if no experience. We also have assembly tutorials, please see the picture. Children who like wind chimes can improve their hands-on ability, enjoy the fun of DIY..
  • High-quality Materials -- Our resin silicone molds are made of high quality silicone, soft, reusable, washable. Crystal nylon thread is tough and not easy to break.The wind chime tube is made of aluminum, will not rust, and collide with resin pendants and beads to make a pleasant sound..
  • DIY Creative Projects -- This resin mold silicone kit is very suitable for DIY and creativity. You can add mica powder, gold leaf, glitter, dried flowers, etc. to get a beautiful finish. Turn your imagination into reality..
  • Widely Uesd -- You can use this silicone mold to make all kinds of wind chimes you like. The finish handcraft can be used as wall decor, wall photo hanging banner, window decoration,ideal gift etc..
Check Stock

Xidmold Dragonfly Wind Chimes Resin Molds Silicone Kit Silicone Resin Mold Kit for Wind Chime Casting Dragonfly Epoxy Resin Molds Craft Supplies for DIY Wind-Bell Decorations Home Decor

  • ♥ Package Includes: 8 x silicone molds, 4 x hollow aluminum tube(random color), 20 x positioning beads,1 x clear nylon thread. Due to different product batches, there may be slight color difference, but it will not affect the product quality..
  • ♥ Material: Wind chimes mold is made of quality silicone which contains good texture and comfortable tactility, durable and flexible to use, safe and odorless, not easy to deform or break..
  • ♥ Applications: These molds are perfect for making wind chimes, using as wall decor, wall photo hanging banner, window decoration, ideal gift, etc..
  • ♥ Easy to Release: Flexible, durable and reusable, easy to get the mold out. simply pour your favorite ingredients in the mold, and keep the ingredients static until completely formed, just twist the mold, the finished product can be easily push out..
Check Stock