Top Modified Resin Reviews

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at hig....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resul....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at hig....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resul....
Check Stock

West System 209-SB Extra Slow Hardener

  • ... 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
  • PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand, whether coating, applying fiberglass, structural bonding, or fairing. Not intended for clear coating..
Check Stock

Fiberglass Warehouse Gel Coat – 1 Gallon White Gelcoat (No Wax) with 2 oz MEKP Catalyst, Easy Application Modified Polyester Resin – Durable and Safe – Ideal for Repairs, Composite Coating…

  • Premium Polyester Resin: The Fiberglass Warehouse white gelcoat is made with highest quality modified polyester resin, providing enhanced flexibility and strength as opposed to classic orthophthalic polyester gelcoats. An excellent choice for professional boat builders and boat maintenance services!.
  • Versatile Uses: This polyester resin gel coat has wide applications and can be used for all sorts of layups, surface repairs, coating, fabricating composite parts. Its unique high-viscosity formula minimizes sagging and ensures high performance..
  • Easy Application: Unlike similar products on the market, this gallon gel coat is easy to apply even by beginners, being suitable for spray-up work and hand layup application. Use a brush, roller or spray gun for excellent surface coverage!.
  • Includes Catalyst: The Fiberglass Warehouse white without wax gelcoat comes with a 2Oz MEKP catalyst, suitable for your long-term needs. This coat gel can be sanded and polished, resulting in a salon-quality glossy finish..
  • Compatible with Polyester Resin Color Pigments: Add the right polyester resin colori....
Check Stock

Magnet Wire 20 Gauge AWG Enameled Copper 158 Feet Coil Winding and Crafts Green

  • Average Wire Diameter: 0.0330 inches (0.837 mm).
  • Enamel Thickness (Build): Double (Heavy).
  • Enamel Coating: Modified polyurethane resin with a polyamide (nylon) overcoat.
Check Stock

Magnet Wire 22 Gauge AWG Enameled Copper 500 Feet Coil Winding 155°C Red

  • Average Wire Diameter: 0.0263 inches (0.669 mm).
  • Enamel Thickness (Build): Double (Heavy).
  • Enamel Coating: Modified polyurethane resin with a polyamide (nylon) overcoat.
Check Stock

WEST SYSTEM 865-4 G/5 Five Minute Epoxy Adhesive, 8 fl oz

  • EASY TO USE, epoxy resin/hardener system for quick repairs, tooling and general bonding. May be used in spot applications to hold parts in position while standard epoxy bonds cure. One-to-one mix, no pumps required..
  • FAST CURING 2-PART EPOXY allows 3-5 minutes of working time. It adheres to a number of surfaces including wood, ceramic, metal, leather, plaster, stone, fiberglass, glass, cork, some plastics, and paper. G/5 is an excellent choice for quick repairs around the house, high-end crafts and much more..
  • IDEAL VISCOSITY allows it to penetrate porous surfaces yet it's viscous enough to bridge gaps when gluing broken objects..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand. Adding G/5 to other WEST SYSTEM epoxies can speed their cure time. Since this very quick-cure epoxy is not as strong or waterproof as our 105 Resin-based epoxies or G/flex epoxies, G/5 will reduce the cured physical properties of other epoxies when blended with them..
  • BEST FOR PROJECTS that will remain dry and are not subject to high loads. Not recommended for long-term bonds subject to high loads or moisture. Comes with one 4 fl oz of Resin, and one 4 fl oz of Hardener..
Check Stock

Apera Instruments, LLC-AI1312 Apera Instruments 201T-S pH/Temp. Electrode, 8-pin Connector, The Replacement Electrode for Apera 400/400S Series Portable Meters

  • ...cient of thermal expansion, hard texture, good air tightness, wide application range of potential (from - 1 to 1V, relative to saturated calomel electrode). It can be made into cylindrical, disc and other electrode shapes. It can also be used as the matrix to make mercury film glassy carbon electrode and chemically modified electrode.
  • 3.Glassy carbon electrode is one of the widely used working electrodes. It is a good inert electrode with good conductivity, high hardness, high finish, high hydrogen overpotential, wide polarization range and chemical stability. It can be used as inert electrode for anodic stripping, voltammetric determination of cathode and variable valence ions, and can also be used as chemically modified electrode.
  • 4.The glassy carbon surface must be mirror and clean. Since the surface of glassy carbon is easily polluted by some organic metal compounds, which seriously affects the measurement (no peak, no impurity peak and no recurrence), it must be cleaned before measurement.
  • 5.There are three main maintenance methods, chemical method 1. Nitric acid immersion and scrubbing. 2. Soak and scrub with ammonia water, anhydrous ethanol or acetate 1:1. 3. It can also be scrubbed with alcohol and then soaked in 6nhcl or 4nho3. Electrochemical ....
Check Stock

1911 Custom Hand Grip Excotic Wood Faux Burl with Blue Pearl Colt S&W Springfield

  • 1911 Full Size, Caspian, Springfield, Remington, Taurus, Ruger SR1911, Rock Island , Ithaca, Thompson, Smith & Wesson, Randal, Armscorp..
  • 1911 Government Model Clones That Have Not Been Modified.
  • FITS on Commander, Government, and Gold Cup Models.
  • This would fit on both ambidextrous and non-ambidextrous safety configuration.
  • Exotic Rosewood Faux Burl with Blue Pearl Resin.
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass wea....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass wea....
Check Stock