Top Mixed Signal Oscilloscope Reviews

Signal Attenuation 20:1 1-0 MHz Bandwidth Converter Passive Attenuator for Oscilloscope

【Exclusive Design】-This signal attenuation is designed for assisting automobile measurement.
【Parameters】-Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.
【Measuring Range】-Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
【Usage Scenarios】-The signal converter can allow oscilloscope to measure fuel injector and primary ignition waveforms.
【Product Feature】-When used in an oscilloscope to measure an inductive signal, such as a jet nozzle and a primary ignition, it provides enhanced input overload protection.

Check Stock

Rigol MSO2302A - Channels: 2, Bandwidth: 300 Mhz

300 MHz, 2 Channel Mixed Signal Oscilloscope with 2 GSa/sec and 14 Mpts memory standard as well as low noise front end. 50 Ohm input included.
300MHz Bandwidth, 16 Digital Channel (MSO).
1 ns/div to 1.000 ks/div Time Base Scale.

Check Stock

Rigol MSO5104 LA KIT - Four Channel, 100 MHz Mixed Signal Oscilloscope with PLA2216 Logic Probe

100 MHz MSO with 4 channels, 8GS/s, 100Mpoint memory and PLA2216 logic probe.
Four channel, 100 MHz mixed signal oscilloscope.
This package includes a PLA2216 logic probe.
100 Mpts memory depth, optional memory depth up to 200 Mpts.

Check Stock

Rigol MSO5074 LA KIT - Four Channel, 70 MHz Mixed Signal Oscilloscope with PLA2216 Logic Probe

70 MHz MSO with 4 channels, 8GS/s, 100Mpoint memory and PLA2216 logic probe.
Four channel (2 analog 2 digital) 70 MHz mixed signal oscilloscope.
This package includes a PLA2216 logic probe.
100 Mpts memory depth, optional memory depth up to 200 Mpts.

Check Stock

Rigol MSO1104Z-S KIT - 100 MHz MSO with Waveform Gen. and Logic Probe (4 Analog, 16 Digital Channels)

100 MHz MSO with 2 Ch/25 MHz source, 4 analog/16 digital channels with logic probe.
Includes DS1104Z-S Plus scope and RPL1116 logic probe.
Includes 2 channel integrated waveform generator.

Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..

Check Stock

allsun Handheld Digital Oscilloscope Multimeter DIY Portable Automotive Diagnostic Lab Scope 3 in 1 Color LCD Display DMM 50MHz Single Channel

Digital Oscilloscope is portable tool for waveform measurement. In contrast with analog oscilloscope, desktop digital oscilloscope or digital multimeter, it is one of the best test tool for use in teaching or field.
The handheld oscilloscope the bandwidth is 50 MHz, the sampling rate is 200 MSa/s, and it owns 320*240 mm high-resolution color-screen, auto function works great and gives the best results most of the time, saving time and adjustments.
The Automotive Oscilloscope combines scope function, multimeter function and signal generator function,it is a beautiful looking unit works pretty well and has a nice feel from the rubber case.
The oscilloscope can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineer's assistant, and will provide great convenience for you in work.
The portable oscilloscope fetures 6000-count high-precision multimeter chip, NPX intelligence collection chipset. 4100 mAh Sony lithium-battery long working hours.

Check Stock

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..

Check Stock

1HZ-500KHZ DDS Functional Signal Generator, Seesii DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth Waveform

1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a battery..
It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope..
The square waveform is suitable for oscilloscope attenuator and the adjustment of probe impulse response..
Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional worker..

Check Stock

Hantek 2D72 2CH Handheld Oscilloscope Scopemeter with Waveform Generator, 70MHz 250MSa/s

Professional Handheld Oscilloscope -- 120 MHz analog bandwidth,with an equivalent sampling rate of 500MSps. 3 trigger mode: Auto/Normal/Single. 4-position square wave signal output: 1kHz, 10kHz, 100kHz, 1MHz..
Safety & Convenient Digital Oscilloscope -- The built-in high voltage protection module can withstand up to 400V continuous voltage and 800V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position..
Proster Oscilloscope with HD 2.4" Color Screen: Display high-definition LCD screen with 2.4-inch 320×240 resolution. Extremely convenient and fast waveform storage function, can store up to 2500 waveform pictures. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more..
Portable Oscilloscope -- Backlight brightness：1～8 levels. Built-in lithium battery, about 8 hours standby time when fully charged. Protective silicone covers on both sides of the instrument, slip-resistant, drop-resistant and shock-resistant, comfortable hand feel..
Professional Oscilloscope -- Accessories: 100MHz probe, charging cable, user manual，cloth bag. Suitable for home appliance inspection, automotive diagnostics, research and education, produc....

Check Stock

Goupchn Oscilloscope Probes Kit with Accessories 200Mhz Test Leads Set BNC to Mini Grabber Cable 4mm Banana Plug to Test Hook Clip Leads

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
Package includes: 2 x 200mhz oscilloscope probes with with Accessories kit, 1 x bnc to minigrabber test lead, 2 x 4mm banana plug to test hook leads, 1 x white transparent storage box..

Check Stock

Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
【What you will get】 1 x HT201 Signal Attenuation.
【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..

Check Stock

CAMWAY Oscilloscope Multimeter Intelligent Oscilloscope Automatic Waveform Multimeter 4000-Count Automatic Range Analog Bar Graph 200k High-Speed A/D Sampling 5 KHz ~ 500 KHz Frequency

...sing+ Auto Search+ Waveform Storage Call+High Contrast+ High Resolution..
【 Automatic Waveform Capture】 Display Hold , Save / Read Up to 10 Waveforms & 100 Sets of Readings, With Panel Calibration Technology, More Reliable, Since The Calibration Factor is Set inside, No Need to Adjust Potentiometers. Intelligent Oscilloscope Multimeter..
【 Oscilloscope Test & Display】 DC voltage 1000V, AC voltage 750V, DC / AC Current 40A, Resistance 40MW, Capacity 10mF, Frequency 5Hz ~ 5MHz, Diode / Continuity Test. HFE and Remote Test , Accurate Display of DC-AD waveforms. Can Display The Waveforms of Signal Strength, Shape, Instantaneous Values..
【 Fast Sampling Speed 】 A / D sample at 200 ksps with a Built-in 4000count Double A / D combination . Oscilloscope's Silent Mode And Waveform Transform Just by One-key During Measure..
【 5 Colors Test Leads 】 Alligator leads Collocate With Oscilloscope Automatic Waveform Multimeter Can Quickly Solve Complex Problems in Electronics, Factory Automation, Power Distribution & Electronic Engineering Equipment by Observe The Test Waveforms..

Check Stock