Top Miter Gauge Fence Reviews

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock

UOKRR Precision Miter Gauge for Table Saw Craftsman Telescoping 20" to 36" Aluminum Miter Fence Repetitive Cut Flip Stop 60° Angled Ends for Maximum Stock Support

  • Precision Angle Cutting: Accurate out of the box, this miter gauge and fence is easily adjusted to operate on either side of your sawblade. Its angles are very precise and got angle holes for 90, 60, 45, 30, 22.5 and 10 degree angle cuts, it will help you achieve square cuts and cut at an angle..
  • Well Constructed: This miter gauge is made of integrated aluminum alloy protractor with laser engraved scale and 9mm thicken plate, it's not easy to deform and with the features of 0.001 inch / 0.02mm high-accuracy. 20" to 36" Telescoping aluminum miter fence with striking metric and imperial scale design will more convenient for your operation, come with a aluminum flip stop for repetitive angled cuts on your table saw..
  • Compatible Standard Slot: The length of the miter bar is 19.68", and its slid smooth and perfect fit the guide rail for your table saw, the miter gauge fits standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot, and it can be installed on most table saws..
  • Tool Free Installation: The miter gauge is very easy to setup and locking by manually turning the knob, made of premium aluminum alloy with its surface treated by CNC-machined anodic oxidation, which has higher wear resistance, the surface has been deburred and smoothed, no nee....
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

Benchtop Router Table with 1-3/4 HP Router

  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations.
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge.
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

  • Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions.
  • Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots.
  • 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head.
  • Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

JessEm 07150 Mite-R-Excel II Miter Gauge

  • DESIGNED FOR ACCURATE CUTS: Mite-R-Excel II Miter Gauge features nine miter detents and a spring-loaded indexing pin to ensure accurate cuts at the most common angles.
  • ADJUSTABLE FLIP STOP: Features adjustable flip stop accommodates up to 3/4-inch thick sacrificial fence.
  • EXTENSION: Fence extends from 20 to 36 inches to accommodate larger work-pieces when cutting.
  • COMPATIBILITY: Fits standard 3/4 x 3/8-inch miter slot and features laser-engraved angle measurements for accuracy.
  • MATERIAL: CNC-machined anodized aluminum components and Swiss-turned stainless steel parts. The guide bar made from Sheffield steel.
Check Stock

INCRA Miter Combo Value Pack

  • Dock & Lock the included INCRA Miter Gauge in Seconds.
  • Removable t-slot retaining clips & adjustable miter bar.
  • GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws....
  • Special Edition Telescoping INCRA-LOCK Fence.
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

Rockler Retrofit Double Featherboard Kit

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock

POWERTEC 71553 Table Saw Fence Featherboard – 2 Pack

  • APPLICATION: Ideal for holding your workpiece in place (against the fence or table top) while cutting for router table and drill press applications, while safely keeping your fingers out of harms way from bits and blades.
  • PREMIUM DESIGN: Made with highly durable polymer, this featherboard set allows you to apply steady, heavy duty pressure for high precision cutting results while reducing kickback and problematic movement.
  • EASY TO INSTALL: 5-star threaded knobs and a standard 3/8” x ¾” miter gauge slot bracket allows you to set up your feather boards quickly and easily to any miter slot. Also includes 5/16”-18 t-bolts for t-slot or t-track applications.
  • VERSATILITY: For band saws, router tables and/or any woodworking machine with a standard 3/8” x ¾” miter gauge slot – double stacked and locked in both the horizontal and vertical position.
Check Stock