Top Mining Investment Reviews

PCI-E Riser Express Cable 16X to 1X with 4pin Power Graphics Extension Ethereum ETH BTC Mining Powered Riser Adapter Card+60cm USB 3.0 Cable (4P)

PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
Note:If you have any questions,please contact us asap,and we will try our best to help you.

Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

【Stackable Frame Mining Machine】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..

Check Stock

Andifany B250C BTC Mining Motherboard 12XPCIE to USB3.0 Card Slot LGA1151 Supports DDR4 DIMM Computer Motherboard, black (500168382)

Innovative design, convert PCIE 1x directly to USB3.0 interface, reduce intermediate transmission links, reduce costs, reduce signal attenuation, and make continuous long-term work more stable.
Upgrade to compatible HDMI-compatible high-definition display interface, convenient and practical.
Support for Core 6th and 7th generation CPUs, LGA1151 is easy to use, low cost, low investment, and efficient mining.
This product uses high-quality materials, is durable, has a long service life, and is firm and stable in use..
Expansion of 12 USB3.0 , plug and , convenient and trouble-free.

Check Stock

FDSF B250C BTC Mining Motherboard 12XPCIE to USB3.0 Card Slot LGA1151 Supports DDR4 DIMM Computer Motherboard, black (500168382)

Innovative design, convert PCIE 1x directly to USB3.0 interface, reduce intermediate transmission links, reduce costs, reduce signal attenuation, and make continuous long-term work more stable.
Upgrade to compatible HDMI-compatible high-definition display interface, convenient and practical.
Support for Core 6th and 7th generation CPUs, LGA1151 is easy to use, low cost, low investment, and efficient mining.
This product uses high-quality materials, is durable, has a long service life, and is firm and stable in use..
Expansion of 12 USB3.0 , plug and , convenient and trouble-free.

Check Stock

MANMEI Open Air 8 GPU Mining Rig Frame for Crypto Miner Stackable Ethereum Mining Machine 1800W Power Supply 110V-264V 8 GPU Motherboard with CPU & 128GB SSD & 8G RAM & 4 Fans Without GPU

Mining Rig Complete System: MANMEI mining rig is designed for crypto mining – Ethereum Classic, ETH, Litecoin, Dogecoin, Monero, Zerocoin, Ripple....
110 - 264V Voltage Power Supply: Built-in 1800W PSU is specially designed for mining rig with up to 90% conversion efficiency. Wide voltage range....
8 GPU Ports Mining Motherboard: Specially designed B85 mining motherboard allows you to put at most 8 Pcs graphics cards in the mining rig at same....
Easy & Quick Installation: With prebuild design, MANMEI B85 frame type mining machine is easy and quick to assemble. Compared with other mining rig....
Mining Rig System Including: B85 motherboard with CPU, 1800W Supply Power (110V - 264V input ), 128GB SSD, 8G DDR3 RAM, 4 PCS 4500 RPM Adjustable....

Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

√【100% Guarantee】We provide 24-hour customer support. If you encounter any problems or the goods you receive are damaged, please feel free to contact us and we will solve your problems in time. If you are not satisfied for any reason you can return the mining rig case for a full refund. We can offer a 30-day money-back guarantee..
√【Ultra-quiet 8 GPU Mining Rig】It is designed for cryptocurrency mining.The mining machine system comes with 2000-3000W (The power is 2000W when the voltage is 110V, and the power is 3000W when the voltage is 220V.) professional Low Decibel mining machine power supply, suitable for home use. Equipped with multiple power protections to provide your system with a more reliable and stable output voltage, providing more consistent power delivery..
√【8 GPU Slots】The mining machine system case comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. Enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency. Allowing you to enjoy mining without any adjustment, with super high work efficiency..
√【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS quiet cooling fans. 4 fans pull the air in and other 4 fans in th....

Check Stock

VTRETU GPU Mining Rig， Ethereum Classic Crypto Miner ，with 8 GPU Mining Motherboard and 2000W Power Supply（110-264V） 8 Cooling Fans ，SSD,RAM，CPU,Windows 10(Excluding GPU) White

【VTRETU Complete Crypto Mining Rig 】: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining –Monero, Ethereum,ETC, Ripple, Zerocoin, Litecoin ，Dogecoin ，etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
【Adapt to universal voltage 】: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90% conversion efficiency. 110V – 264V universal AC input design， supports 8 GPU to work at the same time， allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
【8 GPU Mining Motherboard】: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
【8 Powerful Fans 】 : This mining rig case is equipped 8*4500rpm cooling fan, 4 (Air in) + 4 (Air out),so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard an....

Check Stock

VTRETU Ethereum GPU Mining Rig with 8 GPU Mining Motherboard and 2000W Power Supply110-264V 8 Cooling Fans for Crypto Mining Rig Complete ETH Miner (Excluding GPU), black (V01)

?VTRETU Complete Crypto Mining Rig ?: the mining case is made of high-quality steel material that is sturdy and durable. It can fully protect the GPU and electronic devices from damage. designed for cryptocurrency mining -Monero, Ethereum, Ripple, Zerocoin, Litecoin ,Dogecoin ,etc. NOTE: GPU cards which are longer than 12.6 inches / 32cm in length are UNAVAILABLE for this mining rig.
?Adapt to universal voltage ?: Inbuilt 2000W Quiet power is designed for mining rigs with up to 90 percent conversion efficiency. 110V - 264V universal AC input design, supports 8 GPU to work at the same time, allows you to enjoy mining without any adjustment. It can work at a household voltage of 110V save your power consumption at the same time.
?8 GPU Mining Motherboard?: Intel-B75 mining motherboard.The 65mm distance gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,need dedicated motherboard).
?8 Powerful Fans ? : This mining rig case is equipped 8 x 4500rpm cooling fan, so it can accelerate air convection to keep the graphics card running at high performance. And with wind speed regulator, can reduce the temperature of the mainboard and GPU working environment effectively.

Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....

Check Stock

Blue Orchards Mining Fun Deluxe Party Packs for 16 Guests! Mining Birthday Party Decorations Gamer Birthday Decorations for Boys Construction Theme Birthday Party Pixel Gaming Party Decorations

[EVERYTHING YOU NEED] Our exciting Mining Fun Deluxe Party Pack has all the party basics you’ll need to complement your little one's pixel mining....
[FOR 16 GUESTS]This Mining Fun Deluxe Party Pack includes 16 9-inch paper dinner plates, 16 7-inch paper dessert plates, 20 paper lunch napkins, 16....
[PARENTS LOVE] Parents will love having everything for their little one’s mining celebration all together in one easy mining package! Craft your way....
[MAKE MEMORIES] Grab your Mining party favors and make lasting memories and breathe easy with this adorable, all-inclusive party pack picked....
[HAVE FUN] Bring your pickaxes and let your guests enjoy these Mining inspired party decorations when you decorate your big day with our amazing....

Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....

Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....

Check Stock

SUOHUI Ethereum Mining Rig Complete Mining Case for ETH/ETC Crypto Mining Prebuilt 8 GPU Mining Motherboard 1800W PSU 110v-220v 8 Cooling Fans 8GB RAM SSD CPU Excluding GPUs -Blue

◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
◀ SUOHUI complete mining rig case comes with an 8GPU mining motherboard, 1800W PSU, 8GB RAM, 128GB SSD, CPU (with the cooling system), 4USB ports,....

Check Stock