Top Mining Equipment Machine Reviews

Kingwin Miner Rig Case W/6 or 8 GPU Mining Stackable Frame Expert Crypto Mining Rack for Ethereum Classic Flux Ergo Neoxa Ravencoin–Air Convection to Improve GPU Cryptocurrency Test Bench PC Case

✅ OPEN AIR FRAME - Our high performance rig case comes with 7 fan slots for cooling (fans not included). Excellent equipment design to improve GPU....
✅ DURABLE QUALITY - This aluminum stackable mining case is high durable to fit up to 8 GPUs. This material is durable to support any bitcoin mining....
✅ HIGH POWERED - This mining rig has motherboard compatible power supply mounting (power supply not included) This crypto mining rig is an easy rig....
✅ MUTLI COMPATIBILITY - This mining rig frame can support SSD & HDD installation with enough space between GPUs, for sufficient air flow. This is a....
✅ GUARANTEED QUALITY - Bitcoin mining machine is guaranteed quality and performance or your money back..

Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....

Check Stock

MLLIQUEA 2500W Long-line Mining Power Supply, 2U Mining Power Supply for 8 GPU BTC/ETH Rig Miner Machine, 110V-264V PSU with 12000 RPM Violent Fan

Eth Mining Rig PSU – MLLIQUEA 2500W mining power supply can be the perfect tool for your cryptocurrency mining equipment. Low noise design, about 75dB. Above 110V, output rated power 2000W, above 220V, output rated power 2500W. Supports simultaneous use of multiple graphics cards. NOTE: The power supply cannot be used for ASIC miners with protocols or software. ASIC miners L3+, S9, S9i, S9K, 851/852, H0.1, H0.3 can be used..
Upgrade Material – Our mining PSU shell is made of high-quality steel, sturdy and durable, and reusable. The internal wire adopts an upgraded copper core, which is resistant to high temperatures and is more durable than other types of copper core wires, the external material of the power cord fully protects the wire from wear and tear and prevents the interface and graphics card from being burned, reducing your use cost..
Energy Saving – This power supply has a conversion efficiency of up to 89 percent , high efficiency, and energy-saving, using new large-capacity large magnetic ring materials, very stable performance, and can be equipped with more powerful mining machines, which is safer.DC circuit design, and is equipped with multiple power protections, offers your system more reliable and stable output voltages, providing ....

Check Stock

8 GPU Mining Rig, Complete Ethereum Crypto Miner Mining Machine System Case with 4U 2000-3000W Power Supply ＆ 8 Cooling Fans, ETHW/ETC Miner Frame with Motherboard/CPU/Windows System (Without GPU)

...eive are damaged, please feel free to contact us and we will solve your problems in time. If you are not satisfied for any reason you can return the mining rig case for a full refund. We can offer a 30-day money-back guarantee..
√【Ultra-quiet 8 GPU Mining Rig】It is designed for cryptocurrency mining.The mining machine system comes with 2000-3000W (The power is 2000W when the voltage is 110V, and the power is 3000W when the voltage is 220V.) professional Low Decibel mining machine power supply, suitable for home use. Equipped with multiple power protections to provide your system with a more reliable and stable output voltage, providing more consistent power delivery..
√【8 GPU Slots】The mining machine system case comes with 8 GPU interfaces, and the GPU interface spacing is about 65mm. Enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency. Allowing you to enjoy mining without any adjustment, with super high work efficiency..
√【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS quiet cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool, the air volume is sufficient and silen....

Check Stock

2000W Mining Power Supply Support 8 GPUs GPU Mining Rig, ETH Miner, Active PFC, PC 2000W Mining Power Supply PSU for 8 GPU ETH Rig Ethereum Miner Designed 110V-220V

UNIQUE DESIGN – This mining power supply can be a perfect tool for your Cryptocurrency mining rig. DC circuit design, with stable voltage output..
STABLE AND EFFICIENT – Cooling Fan and Auto Fan Speed Control.140MM Large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
ENERGY SAVING – The power supply rated output power 1800W, With up to 93% conversion efficiency, high efficiency and energy saving, Using a new large-capacity large magnetic ring material, the performance is very stable, Widely used in variety of mines and high-power single 12V industrial equipment..
It’s better for Bitcoin GPU mining, Support Up to 8 GPU(GPU is not included).
NOTICE – This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 2300 RPM, so the noise is normal, Using a new large-capacity large magnetic ring material, the performance is very stable..

Check Stock

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

❤ Please note: The X79-5 card miner does not contain GPU and does not contain GPU. Does not include GPU. X79-5 card mining machine includes: Intel CPU, 128GB SSD, 8G RAM, 1800W power supply (super static power supply), fan (silent fan), rack, graphics card, screw bag, Fan speed control,,win10 system (inactive), installation video. (BTC-X79-5 card mining machine supports Win10, Linux, hiveos (spark), nicehash, minero (os) and other operating systems.) Provide professional technical support.
❤ 3060 graphics card single-card computing power is as high as 48MH/s or more, which perfectly supports graphics card mining ETH, greatly improving the computing power mining function. BTC-X79-5 card mining machine motherboard, supports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards..
❤ X79-5 card mining machine motherboard adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin a....

Check Stock

Mountain Goat Trommel + Desert Fox (w/ Speed Control) Combo Kit

...each rotation of the wheel (105 times per minute). These 7 spirals dump gold into the tube-shaft and into a hanging gold catch-cup. Can run 70 pounds of concentrates in an hour -- both a separator and a concentrator in one self-contained panning machine..
Ideal gold mining equipment for the desert - designed to conserve water and will operate on just 3 gallons..
Desert Fox: 20" x 14.5" wide x 20" high. 10 lbs. Action Packer Storage Container Size: 20 x 16 x 12 inches. Stowed Dimensions: 10 inches high x 14.5 inches wide x 17.5 inches long - Mt Goat Trommel: Length: 32" with hopper installed, Width: 16" at bottom, Height: 24" with adjuster legs, Water Requirement: 5 gallons, Capacity: 2 yards per day.

Check Stock

Block Create Unlimited Miner - Purple Edition | Crypto Miner | Play to Earn | Passive Income | Algorand Blockchain | Metaverse

Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.

Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....

Check Stock

ATX 1600W Full Modular Mining Power Supply GPU for Bitcoin Miner ETH Rig Supports 6 Graphics 80+ Gold Certified with 150CM US Plug Adapter Cable(110V)

This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 6000 RPM, so the noise is normal, if forced to choose to use in PC,there is no way to avoid this noise, PC power fan used within 2000 RPM..
This is a power supply specially designed for the US 110V.The modular mining power supply can be a perfect tool for your Eth Coin rig.Rated power is 1600w. DC circuit design, stable voltage output..
80 PLUS Gold Certified PSU 150mm cooling Fan and Auto Fan Speed Control.150mm large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
1x IDE.It's better for Bitcoin GPU mining,100% Brand New and High quality - GPU:Support Up to 6 GPU(GPU is not included).
Using a new large-capacity large magnetic ring material, the performance is very stable. Widely used in variety of mines and high-power single 12V industrial equipment..

Check Stock

MZHOU PCI-E 1X to 16X Riser Card with M.2 to PCI-E X1 NGFF Slot NVME Adapter Card,for Bitcoin Crypto Mining Ethereum Mining（Black）

PCI-E 1X to 16X riser card---VER009S-PLUS version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment..
The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices.Plug and play..
M.2 NGFF to PCI-E X16 adapter card, support the M.2 NGFF slot of PCI-E channel,using this adapter card can convert the M. 2 NGFF interface into a common PCI-E X16 interface..
M.2 NGFF adapter card have 4 fixed holes on the board, 30mm,12mm, 19mm，21mm.Can be broken off positioning according to the length of the card slot in your machine..
Support System：Compatible with all WINDOWS systems, LINUX, MAC. Package contents:PCI-E 16X Main Card*1/PCI-E 1X Plug-in Card*1/24in USB 3.0 Cable*1/6PIN to 15PIN Power Cable*1/M.2 to PCI-E riser card*1/Screw*1/Screwdriver*1.

Check Stock

1/4 Classifier Sifting Pan Gold Panning Fits 5 Gallon Bucket Mesh Screen

OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....

Check Stock

Antminer L3+ 504MH/S Litecoin Miner, Professional ASIC Litecoin Dogecoin Mining Machine, Scrypt Algorithm LTC Miner & Dogecoin Miner

Litecoin Miner: L3+ is a dual-coin merged miner of Litecoin & Dogecoin. Has high computing power and efficiency: 504 MH/s (expected to fluctuate +/- 5%), Power consumption 800W+10%. Dimensions 8.66 x 18.11 x 11.02 inches.
Durable: This Scrypt Litecoin Miner has a built-in controller, and no separate host is required for operation. The chassis is made of premium aluminum alloy material, which is integrated and durable. With dual fans and independent heat sinks, the heat dissipation effect is good.
Stable: This LTC Dogecoin Mining Machine has a tight industrial power interface, which can be closely contacted and fitted to ensure long-term and stable output of power.
Note: The power consumption efficiency of the Scrypt ASIC Litecoin Miner will vary depending on the PSU, ambient operating temperature and the accuracy of the power meter. Please be careful to avoid dust and catkins, so that the heat of the ASIC Miner cannot be dissipated.
Equipment Condition: Our L3+ Litecoin Mining Machine is in good condition, dust free, used but like new. We will wipe, clean and debug them before shipping to make sure they work properly. If you encounter any problems, please contact our team in time.

Check Stock