Top Mini Table Vise 2 Reviews

MYTEC Home Vise Clamp-On Vise，2.5

HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..

Check Stock

MYTEC Home Vise Clamp-On Vise , 3.0"

HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..

Check Stock

Fashionclubs Mini Table Vice Craft Bench Vise Work Bench Clamp Swivel Vice Hobby Craft Repair Tool

A handy miniature Vise, ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench many more applications.
This mini table vise is made of a heavy duty aluminum alloy that is not only lightweight, but incredibly durable.
Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more.
This vise is incredibly easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on.

Check Stock

Grizzly Industrial H2992-6' 2-Piece Milling Vise

Maximize the work area of your milling table and get the maximum spindle to table clearance with this 2 piece milling vise the vise jaw faces measure.
The vise jaw faces measures 2 1/4-Inch by 6-Inch and the movable jaw has a 1-Inch range.
The bottoms are keyed to speed up alignment.

Check Stock

Bench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making

【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..

Check Stock

Sourcemall Mini Bench Vise Small Table Clamp Hobby Craft Repair Tool (Clamping Range: 0-1.2inch)

The mini bench vise is ideal for holding small parts in Jewelry, Hobby, Model making, Electronics, Home and Work-Bench, and etc..
Mini Vise body is made of Aluminum which is durable, Light weigh and it's a very portable tool..
This clamp is easy to use. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more..

Check Stock

60 Pieces Pin Vises Hand Drill Bits Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood,Jewelry, Plastic etc

【Package Contant】1 piece pin vise hand drill, 48 pieces of micro twist drill bits (0.5-3.0mm), 10 pieces of PCB mini drill bits (0.3-1.2mm), and 1 piece bench vise..
【Pin Vise】Made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
【48 Pieces Twist Drill Bits 】Include 3 Pieces of 0.5，0.6，0.7，0.8，0.9，1.0mm size, total 18 piece.
2 pieces of 1.1，1.2，1.3，1.4，1.5，1.6，1.7，1.8，1.9，2.0mm size, a total of 20 pieces.
1 piece of 2.1，2.2，2.3，2.4，2.5，2.6，2.7，2.8，2.9，3.0mm size, a total of 10 pieces.
【10 Pieces PCB Drill Bit】PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on.
【Fit dimension】 the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.

Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..

Check Stock

7' Front Vise Woodworking Bench Vise Cast Iron Front Screw Vise Woodworking Front Vise Wood Vise

Well Built Quality - Our Front Vise made of high quality steel, resistant to corrosion and rust, sturdy surface greatly reduces the wear rate,and durable to use..
Professional Design - This Front Screw Vise for quick sturdy mounting to your workbench. The 7-inch guide bar makes it easy to work and holds things more firmly..
Dimension - 1-3/16" diameter x 15-1/2" Length screw，3/4" diameter guide Rods and 10-1/4" width x 19-1/4" Length vise.
Easy to Work - Simply pull up on the handle and hold, this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
Widely Used - Useful for woodworking, engineering and welding. Slots in base plate so you can fix the vice to a work table or machine table..

Check Stock

Hand Drill Bits Set 60 Pieces, Precision Hand Pin Vise Rotary Tools with Micro Mini Twist Drill Bits for Wood, Jewelry, Plastic, Craft Projects and Model Building, DIY Drilling

PACKAGE INCLUDE: 48 pieces twist drill bits, 10 pieces PCB mini drill bits(in random color), 1 piece mini-pin vise, and 1 piece bench vise. The complete size pin vice drill kit can meet your different needs..
48 PIECES TWIST DRILL BITS: The micro drill bit set includes 48pcs twist drill bits. 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0mm, 1 piece each size.
0.5, 0.6, 0.7, 0.8, 0.9, 1.0mm, 3 pieces each size.
1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9, 2.0mm, 2 pieces each size..
3 JAW CHUCK DESIGN: Thanks to the 3-jaws designed chuck, you can easily rotate the vise head to clamp the drill bit in a range of 0.2 - 3.4mm. The compact bench vise is approx 4.3 x 2.4 x 1.4 inches, it can be easily put in your bag when you don’t need it..
DURABLE & COMFORTABLE: The hand drill for jewelry making is comfortable to use because of its ergonomically and anti-slip design. The small hand drill bit set was made of durable aluminum alloy material. NOTE: The twist drills are very sensitive for very small diameters. Please choose the correct size drill bits and make sure that you do not push hard. And make sure repeatedly move the drill out of the workpiece (chip removal)..
APPLICATION: The mini hand drill bit set is great for wood, also for resin, resin, jewelry,....

Check Stock

Mini Bench Vise Quick Adjustment Bench Clamp Universal Drill Press Vise Fixable Table Vice for Jewelry Watch Repairing Hobby Pin Vise DIY Sculpture Craft Carving Tool (Clamping Range: 0-2.2inch)

【Clamping Base Design】The upgraded base can firmly fix the mini table vise on the workbench and free up your hands. The maximum desktop thickness applicable is 2.1 inches (53mm)..
【Quick Adjustment Button】Both jaws and base have quick adjust buttons, press the button, push the jaws to quickly position and clamp, no need to turn the screw to move slowly..
【Larger Clamping Range】The size of our small drill press vise is larger than most mini bench vice on the market. In particular, the maximum opening of jaw is up to 2.2 inch(55mm), which is the largest on Amazon at present..
【Perfect for Small Work】Widely used for clamping of small objects, jewelry carving, watch repairing, model making, electronics repairing, etc..
【Satisfactory Service】Our small work hobby tools are ideal for craft lovers. If you have any questions or dissatisfaction, please contact us first, we will provide a satisfactory reply as soon as possible!.

Check Stock

46 Pieces Pin Vise Hand Drill Bits Set Include 1 Pin Vise Hand Drill 45 Mini Twist Drill Bit (0.3-3 mm) for DIY Wood Clay Resin Casting Molds Jewelry Pendant Making Supplies

...ect a twist drill bit, put the clip into the drill bit, tighten and adjust to the tightness of the drill bit, install the selected drill bit, and rotate it in the right direction, then you can punch a hole.
Durable material: alloy material makes the pin vise hand drill more durable and not easy to get rust.
The mini twist drills are made of high speed steel, durable and not easy to blend while using.
Hopefully the pin vise hand drill bits set will give you a satisfying using experience, and the pin vise hand drill is equipped with 45 pieces mini twist drill bits.
Enough quantity for you to store at once for different uses on different occasions.
Various sizes: the size of twist drill ranges from 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6, 1.8, 2.0, 2.35, 3.0 mm.
Equipped with 2 different plastic boxes for your storage.
You can put them in different inner boxes according to the different size of the drill bit, no need to worry about losing any piece of them.
Practical and portable: the manual hand drill set is lightweight and can be tucked into your bag easily, occupies little space.
Useful tools for electronic assembling, tooling, model making, winding, home decorating etc..

Check Stock

Fasmov Swivel 3\ Universal Table Vise Tilts Rotate 360° Universal Work

The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel..
Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table..
Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position..
Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work..
Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..

Check Stock