Top Microphone Stand Desk Reviews

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....

Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..

Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..

Check Stock

Blue Microphones Yeti Professional USB Desk Microphone - Blackout BLACKOUTYETI + Suspension Boom Scissor Arm Stand + Pop Filter Microphone Wind Screen + Mic Stand Adapter + MicroFiber Cloth

Blue Yeti Ultimate USB Microphone Silver 988-000103.
The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern....
INCLUDED IN THE BOX: Blue Microphone Yeti Professional USB Microphone Desk - Microphone (Blackout) - Comes with a Stand - Includes USB Cable -....
BUNDLE INCLUDES: Blue Microphones Yeti Professional USB Desk Microphone (Blackout) - Microphone Suspension Boom Scissor Arm Stand - Universal Pop....

Check Stock

eWonLife Mic Boom Arm, Microphone Stand Desk Mount with 5/8 Thread, Heavy Duty Boom Mic Stand for Shure SM7B, Mv7, Blue Yeti, Hyperx Quadcast, With Filter, 5/8\ to 3/8\

4.4 LB Max Load Weight Mic Boom Arm: The microphone arm stand is made of metal with 1.3mm thickness, and the internal spring is sturdy enough to keep mic well placed, no "dip" or "sink". You can also adjust the mic arm flexible, no stiff..
Smooth and Good Range of Motion：The all joints of the mic arm stand are well designed to allow its vertical and fore-aft motion and side to side motion fairly smooth and provide good range of motion..
Stable Desk Clamp, Suit for a Variety of Tables: The desk clamp with a 39cm² wide grippy contact point on the desk, which makes it stable. It can supports the desks as thick as 2.4 inches. The desk mic stand even can be suitable for the desk with 1.18”/3cm small edges..
Microphone Stand with Internal Spring, Better Using Experience: High-quality and well-designed internal springs do not make any squeaking sound when the mic arm desk mount are moving. The internal spring make it has a cleaner more professional look. The filter with 2 screen can blocks and dissipates air blasts, reducing its velocity to get good sound..
Wide Compatibility: The microphone desk arm stand is compatible with Blue Yeti, Blue Snowball, Shure Mv7, Sm7b, Hyperx Quadcast, Fifine and other mics. Come with 5/8” to 3/8” Adapter, it fit for eur....

Check Stock

Audio Technica AT2035 Microphone with Knox Gear Pop Filter, Boom Arm and XLR Cable Bundle (4 Items)

[Strong Compatibility] :For at2020 and At2035 mic boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with at2020 and At2035 mic, but also suitable for mount most standard-sized microphones..
[Easy to use]:This at2020 and At2035 mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with at2020 and At2035 mic,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
[Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for at2020 and At2035 Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
[Rugged desk mount]: In comparison to the old versions, this at2020 and At2035 zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
[Various accessories]: The set not includes at2020 and At2035 Microphone.The set includes 1 x at2020 mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..

Check Stock

Microphone Stand for Blue Yeti, Snowball, Boom Arm Scissor Mic Stand with Shock Mount, Windscreen and Double layered Pop Filter, Heavy Duty Mic Boom Arm Stand, Broadcasting and Recording.Game

【Blue Yeti Snowball Mic Stand with Metal Shock Mount】: Luling Arts microphone arm with shockmount desgined for Blue Yeti, Yeti Pro ,Blue Snowball or mount most standard 1/4'' to 5/8'' adapter microphones.also comes 3/8'' to 5/8''Screw adapter.the mic arm with shock mount Max Support Weight is 70 oz/2 kg (4.4pound)..
【BLUE Snowball boom arm with shockmount】This Blue yeti boom arm Improved leg from hollow to solid ,no longer break or shake. more Stability Range of motion and stronger. Will not break the legs,the market will break the legs after 6 months of use..
【BLUE SNOWBALL Yeti Mic Stand with Pop filter】:This adjustable blue snowball yeti microphone stand comes double layer Pop Filter,snowball mic foam cover,double reduce the plosive, wind interference, saliva spraying.free angle and height to show your perfect voice let you pick up any times..
【Upgraded table mounting clamp for BLUE】:The microphone boom arm desk mount Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up ....

Check Stock

Microphone Boom, Bietrun, Full metal adjustable Microphone Boom

Heavy Duty Structure: Dual spring design on separate arm stand, instead two spring on one arm stand,triangular truss section at the lower end ensures better stalibilty, stronger weight bearing ability and no adjusting noise. The max loading capacity can be up to 4.0 lb/1.8kg.
Foldable and Flexible Arm Stand: InnoGear mic stand is fully adjustable in all parts: 135° back and forth, 180° up and down. Easy to get the perfect angle and pull the stand out of sight when stands idle. Screw the knob on the base can fix the 360° swiveling stand in a fixed direction..
Universal Compatibility: The T20 comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.).
Space-saving: Unlike traditional mic stands, this mic suspension boom arm is foldable, which helps free up desk space. You can easily clip and unclip the boom arm from your desk..
All-In-One Combo: Package includes all the items you need for studio recording and live sound, a microphone stand, pop filter and 1 Pack microphone windscreen.

Check Stock

Rockville DMS40 40\ Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp

Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm..
Suitable for studios, broadcasting, podcasting, and more..
Arms: 20"+20" arm length for adjustment..
C-shape desk clamp is made of aluminum alloy..
Fits any desk less than 2 inch thick. ABS plastic mic clip..
You can set the base stand in the desk firmly and adjust to your favorite position..
High quality steel frame is sturdy and durable..
Internal springs for silent and effortless positioning.

Check Stock

Gator Frameworks Flexible Black Gooseneck for Microphone; 6

Flexible: Can be angled 360 to accommodate any position for the microphone.
Strong: 1/2" x 13" gooseneck ensures your microphone will stay firmly in place.
Variable Fit: 1" plastic microphone holder stretches to fit a large range of handheld microphones.
Adjustable: Microphone holder can rotate on internal threading to ensure microphone is pointed in an ideal direction.
Secure: Desk clamp securely holds mic stand to desk and ensures it will not move.

Check Stock

Razer Seiren Mini Mic Stand Suspension Scissor Boom Arm with Pop Filter Foam Windscreen, Upgraded Heavy Duty Clamp for Razer Seiren Mini USB Streaming Microphone Frgyee

Heavy Duty Boom Arm: The adjustable microphone arm stand is made of durable steel for heavy duty carry. Max load: Approx.53oz/1.5kg. It offers 360 full rotation to hold your microphone in any position you like. You can adjust the suitable angle and height to show your perfect voice..
Easy to Use: Take the whole base mount off including the small post from your Razer Seiren Mini Mic Original Tabletop Stand and then screw the mic to the boom arm stand..
Upgraded Desk Clamp: Compared with other clamps, this metal desk clamp has anti-scratch pad and larger contact area for easily clip to any desk up to 2.4"/60mm thick. More stable and durable..
Perfect Improve: Come with a Foam Windscreen for Razer Seiren Mini USB Microphone. To reduce the plosive, noise, wind interference, saliva spraying during your recording or broadcasting to ensure a clear and high quality record. Protect your mic from moisture and damages..
All In One: 1x Wind Cover only for Razer Seiren Mini Microphone, 1x Mic Scissor Arm Stand, 1x Table Mounting Clamp. Great for your recording, YouTube videos, podcasting, online games or voice/spoken work..

Check Stock

Moukey Desktop Mic Stand, Adjustable Desk Mic Stand with Non-Slip Mic Clip, Universal Table Mic Stand with 5/8\ Male to 3/8\ Female Screw for Blue Yeti Snowball Spark and Other Microphone, MMs-2

Upgraded Non-Slip Mic Clip: Moukey MMS-2 desktop mic stand is equipped with unique dents anti-slip microphone clip to hold your microphone firmly. The mic stand comes with a special adjustment knob for adjusting the microphone clip angle easily. It’s your ideal choice to meet various needs..
More Stable Weighted Base: Our desk microphone stand is NEWLY UPGRADED with a bigger and weighted base which is 5.51 inches in diameter and weighs 2.33 pounds, addition features 3 rubber pads on the bottom to absorb vibration and provide a precise balance and stability..
Screw-in Style Height Adjustment: Different from other snap-in style stands, our screw-in style desktop mic stand is much more secure and tight, making sure the height stays on without SLIDING down. Support higher adjustment height from 12.6" to 18.5"..
Compatibility: The desk microphone stand comes with an additional high-quality metal 5/8" male to 3/8" female adapter for multi-purpose use, compatible with Blue Yeti, Blue Yeti Pro, Snowball, and other microphones.（Max load: Approx 2.2 lbs）.
Portable Mic Stand: The microphone stand is portable and easy to install, ideal for multi-occasion use such as conference room, church, classroom, etc..

Check Stock

Boom Arm Compatible with Shure Sm7b and Shure Sm58 Mic, Desk Mic Stand for Shure Series Microphone Such As Shure Mv7 Sm57 Se215 and Mv88.

Strong Compatibility :NOTE:You need to screw the corresponding nut in the bracket set to the bracket before you can install your Shure microphone on the bracket.Microphone boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with Shure, but also suitable for Shure series or mount most standard-sized microphones..
Easy to use:This Shure boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with Shure series microphone,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for Shure carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1.0kg..
Rugged desk mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
Various accessories: The set not includes Sh....

Check Stock