Top Micrometer Encoder Gauge Reviews

Industrial Tools Dial Bore Gauge Set, 50-160MM Measuring Range Micrometer Cylinder Tool Kit, 0.01 Graduation Interval Measurement

All-Metal Device: All-metal clamping device, fastening the meter head, stable and accurate, durable. Insulated grip, comfortable to hold, effective heat insulation, safe and reliable..
High Quality Gauge Head: Sealed gauge head, aluminum housing, glass mirror cover, waterproof and dustproof, clear scale, intuitive data, sturdy and wear-resistant..
Accurate Measurement: The bore gauge is used to measure the internal dimensions of the workpiece by comparison method. This inside diameter measuring instrument is equipped with good guiding protection bridge, which can be accurately and reliably self-centered..
High Accuracy: The measuring range of this micrometer is 50-160 mm. The measuring head has a movable probe at one end and an interchangeable probe at the other end that changes depending on the diameter of the hole being measured. Easy to use, easy to measure, and high accuracy of 0.01..
Packing List: 1 x Gauge Rod, 1 x Gauge Head, 5 x Measuring Rod. We sincerely provide you with high quality products, if you have any questions, please contact customer service, we will provide you with satisfactory service..

Check Stock

LuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture

Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
Micrometer Holder Stand fit for most inside and outside micrometers..
Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..

Check Stock

50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring

STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..

Check Stock

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
1 gage: 1/2 - 3/4" range x 4.40" overall.
1 gage: 3/4 - 1-1/4" range x 4.40" overall.
1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
1 gage: 3-1/2 - 6" range x 5.85" overall)..
【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
【Unique Design】 The spring tension of bore measuring tool gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..

Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

Micrometer Head: For general purpose measuring applications.
carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
meets IP54 specifications for dust and water protection.
Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.

Check Stock

Metric Micrometer

【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....

Check Stock

Mahr Federal EGH-1028 Surface Analyzer Groove Bottom Probe, 10-Micrometer Radius

For use with Mahr Pocket Surf series portable surface roughness gauge (sold separately).
Groove-bottom probe for gauging recesses with maximum depth of 6.35mm (0.25").
90-degree conical diamond stylus for two-dimensional tracing.
10 micrometer (0.0004") radius stylus for use with rough surfaces.
Measures average roughness (Ra), mean depth (Rz), and maximum depth (Rmax) parameters.

Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..

Check Stock

5/16\ to 6\ Telescopic Gauge Set 8mm-150mm Adjustable Inner Diameter Gauge 6pcs/Set T-Bore Hole Gauges

Working Principle - Double action handles are rigidly attached to the contact plungers and are automatically self-centering..
Function - Assist in quick checking of holes, slots and recess up to 6 inch deep..
Scope of Application - Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
Advantage - The ends of both contact are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
Super Quality - Self centering telescoping gauge has high rigidity, good wear resistance, durable in use..

Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
carbide-tipped anvil and spindle have 0.256" measuring....
Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.

Check Stock

18 AWG DC Power Pigtail Cable 2.1mm x 5.5mm Barrel Plug Wire Female Connectors for CCTV Security Camera and Led Lighting Power Adapter by SIM&NAT Pack of 10

Ultra thick 18 gauge 12v male power pigtail cable are thicker than other 22 gauge pigtails wire, which can be used for higher current devices, the max....
SIM&NAT 18 gauge stranded tinned copper wire - Single strand on the micrometer is 0.008" and there are 24 strands for each cord.(Total 48 strands for....
end of the dc power pigtail cables are pre-tinned making them super easy to solder, which is widely used for CCTV systems, surveillance, part....
Outside of barrel (Blue wire) - Negative.
Package Included: 10 * 2.1mm x 5.5mm Female pigtail connector wire.
6 months full refund without any hassle..

Check Stock

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

[ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
[ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
[ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
[ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
[ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..

Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

1 gage: 3/4 - 1-1/4" range x 4.40" overall.
1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
1 gage: 3-1/2 - 6" range x 5.85" overall)..
【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
【Unique Design】 The spring tension of bore measuring tool gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..

Check Stock