Top Microcontroller Development System Reviews

Diodes Incorporated Microprocessors - MPU ARM Cortex-A5 MPU 32bit, Video decoder (ATSAMA5D44A-CU)

  • 1 Pcs ATTINY84A-PU 8-bit Microcontroller with 8K Bytes In-System Programmable Flash..
  • MCU MICROCONTROLLER, 8 BIT, ATTINY, 20MHZ, DIP-14..
  • 8K Bytes of In-System, Self-programmable Flash Program Memory.
  • 512 Bytes of In-System Programmable EEPROM.
  • New and original ,quality ensured , no-hassle refund if you are not 100% satisfied!.
Check Stock

Ingcool Acrylic Case for Raspberry Pi Pico, Include Raspberry Pi Pico with Pre-soldered Header (Color-Coded), Based on Raspberry Pi RP2040 Chip, Support C/C++/Python

  • A low-cost, high-performance microcontroller board with flexible digital interfaces, incorporates RP2040 microcontroller chip designed by Raspberry Pi.
  • Dual-Core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
  • 26 × Multi-Function GPIO Pins, configurable PIN function, allows flexible development and integration.
  • Support C/C++, MicroPython, comprehensive SDK, dev resources, tutorials to help you easily get started.
  • Clear acrylic protection case for Raspberry Pi Pico, dule-sided protection, with customized key cap, pinheaders/connectors still accessible.
Check Stock

AITRIP 3PCS Type-C USB ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters for Arduino

  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board.
  • Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use..
  • Package: You will get 3 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

AITRIP 5PCS ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino

  • Package: You will get 5 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE Features:.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • The best power and RF characteristics are safe, reliable and scalable for various applications..
  • 5PCS ESP32 Development Board TYPE-C USB CH340C WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP32-DevKitC-32 ESP-WROOM.
Check Stock

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

  • The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
  • The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
  • The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
  • The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
  • Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check Stock

Waveshare OpenH743I-C Package B with 7inch Capacitive Touch LCD (F) The STM32 Development Board Designed for The STM32H743IIT6 Microcontroller

  • OpenH743I-C is an STM32 development board designed for the STM32H743IIT6 microcontroller, consists of the mother board and the MCU core board CoreH743I..
  • The OpenH743I-C supports further expansion with various optional accessory boards for specific application..
  • The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers..
  • The OpenH743I-C does NOT integrate any debugging function, a debugger is required..
Check Stock

KeeYees USB Logic Analyzer Device with 12PCS 6 Colors Test Hook Clip Set USB Cable 24MHz 8CH 8 Channel UART IIC SPI Debug for Arduino FPGA M100 SCM

  • This kit contains 12pcs SMD IC 6 Colors Test Hook Clips which are ideal for using this 24MHz 8CH logic analyzer..
  • If you are doing microcontroller, ARM system, FPGA development, we highly recommend you purchase this product! This item will help you solve your problem when you do MCU related products, especially for UART, SPI, IIC and other communication debugging..
  • Compatible with the Logic analysis software and open source programs such. B. sigrok (protocol analysis of RS232, SPI, IIC, 1-Wire, etc.).
  • Reliable Technical Support: We have prepared detailed tutorial, includes: guidance manual, demo code, burning tools, necessary class libraries. Please visit our website (github: Keeyees/KY-57) to get tutorial or can contact us on Amazon, we will send PDF Document to you..
Check Stock

Mapei Keracaulk U Unsanded Caulk Pearl Gray - 10.5-oz

  • The st-link / v2 programmer is a circuit debugger and for the stm8 and STM32 microcontroller families.
  • The unique Wire Interface Module (Swimming) and JTAG / Serial Debugging (SWD) Interfaces are used to communicate with any STM8 or STM32....
  • STM8 applications use the high-speed USB interface to communicate with St Visual Developing (STVD) or St Visual Program (STVP) software..
  • STM32 applications use the high-speed USB interface to communicate with atollic, IAR , or Keil in integrated development environments..
Check Stock

sb components Raspberry Pi Pico Board with Raspberry Pi Pico GPIO Expansion Board, Multi-Purpose Raspberry Pi Pico Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Raspberry Pi Pico GPIO Expansion Board is used to break outall the pins and power of the Raspberry Pi Pico development board via male or female headers.
  • Raspberry Pi Pico GPIO Expansion Board allows the user to connect it to other components with the help of a jumper wire.
  • Raspberry Pi GPIO Expansion Board is specially made to work with the Raspberry Pi Pico Board.
Check Stock

ACEIRMC 8pcs Digispark Kickstarter Mini ATTINY85 USB Development Board Module Compatible for Arduino IDE 1.0

  • The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when for Arduino is too big or too much..
  • The Digispark is shipped fully assembled except for the two included and easy to solder headers..
  • Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
  • 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Check Stock

ARCELI TL866II Plus USB High Performance EEPROM Flash BIOS Programmer for ATMEL AVR ATMEGA AT90 PIC GAL SRAM CMOS

  • It can automatically identify the operating system to install and run under WIN2000 / WIN XP /WIN 2003/ WIN 2008/ WIN VISTA / WIN7 / WIN8 / WIN10 (32BIit/64Bit).
  • The programming speed is greatly improved . It is suitable for small batch production and supports 4 programmers for one computer..
  • A wide range of chip support, supports the chip 15000+, supports a variety of 24 25 26 27 28 29 37 39 49 50 series of serial and parallel memory chips, microcontroller 51 series, ATMEL AVR ATMEGA AT90 series, MICROCHIP PIC10 PIC12 PIC16 PIC18 series microcontroller , GAL programmable logic device programming, SRAM test,54/74 and CMOS4000 integrated circuit integrated functional test..
  • Support NAND Flash chip, the function is complete and comprehensive, the capacity supports to 8Gbits. 25 series Nor Flash capacity support to 512Mbits..
  • Pin contact check function, poor contact pin can pinpoint.
  • Ultra-low power consumption: the entire programmer uses ultra-low-power chips, using USB interface, the first truly all chip programming without external power integrated programmer..
Check Stock

ACEIRMC ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE (3pcs)

  • 1.ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
  • 2.Ultra-Low power consumption, works perfectly with the for Arduino IDE.
  • 3.SupportThree Modes: AP, STA, and AP+STA.
  • 5.ESP32 is a safe, reliable, and scalable to a variety of applications.
Check Stock