Top Micro Jst 2connector Kit Reviews

iFlight Mirco BEC 5V 3A / 12V 2A Output Adjustable Step-Down Voltage Regulator 2-6S for FPV Quad Drone Built 3pcs

★ Product Type: High quality male and female housing and 2.54mm female pin header connector compatible with jst-xh connector Kit..
★ Temperature Range: -25 Degree Celsius to 85 Degree Celsius(including temperature rise in applying electrical current)..
★ Easy to use: This set of connector is easy to install, Just put the crimps in the tool and press them, make the crimp the insulation are all the....
★ Widely Application: widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers,....
★ Package include: This set include JST-XH 2.54mm Female Pin Connectors 320PCS,2/3/4 Pin male and female housing each 20PCS,5/6 Pin male and female....

Check Stock

MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display & 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin

After some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires. Thanks a ton for every customer's suggestion and support..
This product interface is JST1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors， The maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current..

Check Stock

AKZYTUE 3.7V 3800mAh 955070 Lipo Battery Rechargeable Lithium Polymer ion Battery Pack with JST Connector

3.7V recheargeable Li-Po battery for Makeblock mBot robot kit..
The standard 2-pin JST-PH connector – 2mm spacing between pins..

Check Stock

SoloGood 4pcs Emax Tinyhawk Whoop HV LiPo Battery 450mAh 1S 3.8V 85C for Cinewhoop Tinyhawk JST-PH 2.0 Micro FPV Racing Drone

EMAX 450mAh 1S LIHV lipo battery for EMAX Tinyhawk Brushless Micro Indoor Racing Drone and the other Micro FPV Racing Drone.
Discharge Rate：80C, Max Burst discharge Rate: 160C.
Net Weigh：12g, Dimensions: 59mm*18mm*6mm (L*W*H）.
Please contact us in time hen you have any questions about the battery , we will take all responsibility for your satisfaction connector.

Check Stock

SoloGood TATTU 5pcs 300mAh 1S Battery 3.8V 75C FPV Lipo Battery with PH2.0 Plug Connector for FPV Tiny Whoop 1S Brushless Whoop Drone

Original EMAX 450mAh 1S LIHV lipo battery for EMAX Tinyhawk Brushless Micro Indoor Racing Drone and the other Micro FPV Racing Drone.
Discharge Rate：80C, Max Burst discharge Rate: 160C.
Net Weigh：12g, Dimensions: 59mm*18mm*6mm (L*W*H）.
Plug:PH2.0Please contact us in time hen you have any questions about the battery , we will take all responsibility for your satisfaction connector.

Check Stock

ShareGoo Male JR to Female JST Y Splitter Harness Parallel Wire & 1 Pair JST to JR Male Female Cable Servo Adapter for RC Plane Helicopter Car Truck

Package total includes 3PCS cables,1PCS Male JR to Female JST Y Splitter,1PCS Male JST to Feamle JR Cable and 1PCS Female JST to Male JR Cable.A great parts for DIY RC models..
Suitable for most mini RC helicopter and indoor 3D plane,also can be used to RC car truck for winch,lights,motor cooling fans which powered by receiver.For example ,you can hook up the winch and run a cooling fan to cool the motor..
Great for small Lipo and NiMh connection..
Cable Length:18CM/7.08"(JST to JR Y cable),10CM/3.93"(JST to JR Cable).

Check Stock

6PCS JST Plug Splitter JST Male Female Y Cable JST Y Parallel Adapter Harness JST to JR Adapter for Traxxas TRX-4 RC Car Crawler Truck Cooling Fan ESC Battery Motor

Package includes 6PCS Cable. 1PCS Male JST to Female JR (Futaba) Cable, 1PCS Female JST to Male JR Cable,1 Male to 2 Female Y Harness, 1 Male to 3 Female Y Harness, 1 Female to 2 Female Y Harness, 1 Female to 3 Female Y Harness..
They are special for Traxxxas car truck crawler and HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car, mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection..
The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch..
The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time..
Cable length: 15cm/5.9inch for splitter cable, 10cm/3.9inch for JST to JR cable.

Check Stock

Infinity 1S 450mah Lipo Battery 3.8v 85C JST-PH2.0 HV LiHV Batteries for 1S Racing Drone Quadcopter EMAX TinyHawk Indoor Micro FPV

Fit for EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus Arris X80 1S Kingkong Tiny 7 Snapper7 Beta75S Micro FPV Racing....
Capacity: 450 mAh, Rate: 85C, Voltage: 3.80V, Connector: JST-PH 2.0.
Weight: 14g，Dimension: ,59 * 17 * 6.2mm/2.32*0.67*0.24in.
The flight time largely depends on the difficulty of your flight and the level of your battery.
Please contact us in time hen you have any questions about the battery , we will take all responsibility for your satisfaction connector.

Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.

Check Stock

EBOOT 20 AWG JST Plug Connector 2 Pin Male Female Plug Connector Cable Wire for LED Lamp Strip RC Toys Battery, 10 Pairs

Total cable length: approx. 210 mm/ 8.3 inch.
2 Pin JST connector, one side for plug the other side for welding.
Package including: 10 pairs JST plug connector with cable wire (10 pieces female, 10 pieces male).
This JST plug connector is suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery.

Check Stock

BETAFPV C02 FPV Micro Camera 1/4’’ CMOS Sensor 1200TVL 2.1mm Lens NTSC FOV 160 Degree with Global WDR for Micro Whoop Drone Like Meteor Cetus Series Drones

【Application】BETAFPV C02 FPV micro camera comes with 1200TVL resolution and 1/4" CMOS sensor, it ensures a high-quality and clear image. Global....
【Ultralight Weight】2.1mm lens, FOV 160° beyond the wide-angle for recording more wide and beautiful scenes while minimizing the weight to 1.45g.
【Plug-N-Play】Feature a JST-0.8 connector. Very easy to install with the plug-and-play design, it's a great choice for BETAFPV F4 1S AIO FC, and....
【Suitable Drones】Best match with M01, A01 and M03 VTX, suitable for all brushed and 1S brushless micro drone like Beta65S, Meteor65, Meteor75,....
【Ultra-light Combo】You will receive an injection molding micro canopy, more durable and not easy to break, which is the perfect combo with C02 FPV....

Check Stock

HIRCQOO RC LED Light Bar Roof LED Lamp Body Shell Roof Light Compatible with Traxxas TRX-4 Axial SCX10 II 90046 RC4WD D90 D110 1/10 RC Crawler Car Truck (5 LED Light)

1.Compatible with 1/10 Traxxas Trx-4 Axial SCX10 II 90046 D90 RC4WD D110 RC crawler car truck.
great for running at night or in low light areas. Super bright lighting with stable performance. Make your RC car more cool and attractive..
2.Rc car roof light bar kit are made of high quality metal and plastic, durable to use..
3.Working Voltage: 5V-7V, Connector type: JST/Jr.
Powered by the receiver. Also can be powered by ESC, (Require JST Y Harness Cable)..

Check Stock

SKYRC IMAX B6 V2 60W DC LiPo Battery Balance Charger,

★Multifunctional 19 charging adapters in one,used for different kinds of batteries..
★Multi-Charging cable banana plug used in the charger, abandoning the original multi-way adapter, making the battery and charger to achieve each branch, and while a single wire makes..
★The main output line using 14AWG soft silicone wire that can withstand 80A current..
★Great multifunction charge adapter,main line is silicone cable, durable, last long..
★Input Connectors:Anderson plug Daejeon Palace EC3 EC5 JST Micro connector Oda Palace Sevro deans T plug connector XT60 and see other connector on the pictures..

Check Stock