Top Micro Dc Geared Motor Reviews

Fielect DC Motor 3V 18500RMP Mini Electric Motor Miniature DC Motors Electronic Component Motor Accessories for DIY Rc Car Robot Toys Cars, 30mm x 12mm

【Material】- The electric motor is made of metal, and the output shaft is made of high-hardness copper, which has good toughness and impact resistance.
【Features】- DC micro motor is durable, stable performance, shockproof, wear-resistant, and high precision. It is an excellent substitute for rusty or damaged DC motors on the machine.
【Function】- DC motor can adjust the speed, but the motor speed can only be reduced, not increased.
【Application】- Micro motors are used in electronic game machine printers, rear-view mirrors, headlight beam level adjusters, car toys, DIY hand drills, electronic equipment, etc.

Check Stock

WMYCONGCONG 5 PCS 37mm DC Geared Motor Mounting Bracket Holder + 5 PCS 6mm Hex Motor Coupling w/Screw

Hex Coupler Size: 18 x 12mm / 0.71 x 0.47".
Ellipse Hole Size: 27 x 13mm / 1.06 x 0.51"..
Bracket Size: 46 x 42 x 40mm/1.8 x 1.65 x 1.6"(L * W * H).
Effortless Installation: This metal motor holder has convenient holes for mounting..
Package Content: 5x DC 37mm Geared Motor Bracket + 5x 6mm Motor Coupling..

Check Stock

Keadic 4 Sets 37mm DC Geared Motor Mounting Bracket Holder with 6mm Hex Coupling and Set Screws

✿ 1. What You Get? This 37mm DC Geared Motor Mounting Bracket Holder Set includes: 4pcs Brackets, 4Pcs 6mm Hex Coupling and 8Pcs Set Screws. Almost prepared all parts for you to fix 37GB,37GA motor gearboxes..
✿ 2. Heavy Duty: These motor mounting brackets are made of sturdy steel, which are thicker and more heavy duty than most brackets in the market..
✿ 3. Size: Black Bracket: 40 x 40 x 45mm/1.57" x 1.57" x 1.77" (L*W*H), the smaller mounting hole diameter is 2.95mm/0.12.

Check Stock

PLUMIA DC 12V 30RPM Gear Motor Centric Output Shaft 37mm Diameter Gearbox High Torque Electric Micro Speed Reduction Geared Motor

Product packaging: 1×DC Gear Motor, 6×Screw, 6×Nut..
Pure copper wire core rotor, galvanized surface treatment, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.With precision winding technology, the geared motor power instant increased by 30%..
Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable..
You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms..
We only offer 100% New PLUMIA Brand high quality motors! Any quality issues, We promise 100% unconditional return service..

Check Stock

Episode 8

Internal cable routing To help minimize cable clutter, the DK200 features internal cable routing that helps conceal and protect wiring within the frame..
HYDRAULIC DISC BRAKE Make it easy to adjust your brake and shift lever for maximum, one-finger control for that perfect fit and feel..
Suspension Fork Front suspension comes standard on the Freego DK200 and includes adjustable preload, compression, and rebounding damping..
Motor The Freego DK200 motorbike is driven by a powerful internally geared brushless DC hub motor.capable of outputting up to 1200 watts of peak power..
4.0" Fat Tires The Freego DK200 includes the all-new Chaoyang tire. At 4.0" wide, the all-new Chaoyang tire is the widest and most aggressive 20"all-terrain fat tire in its class. The BDGR is the first tire that blends motorcycle and bicycle tire construction methods to meet the needs of this revolutionary vehicle..

Check Stock

Electric Bicycle Motor Kit, 12V 250W DC High Speed Electric Bike Conversion Kit with Speed Controller, 13 Tooth Sprocket, 38 Section Chain Electric Gear Motor Kit for E-Bike, Electric Motorbike

【EASY TO USE & CONTROL】This electric gear motor is easy to use and control, providing steady speed and sensitive braking and steering control. The rated power is 250W, and the rated speed is 2950 RPM, Main application is suitable for electric bicycle..
【HIGH QUALITY】This electric DC motor equipped with reliable metal housing protects the internal circuit and has good heat dissipation performance to avoid thermal overload. With long life, high speed operation, high temperature resistance, high power..
【PRACTICAL ELECTRIC BIKE CONVERSION KIT】This electric motor kit comes with a 38 section chain, a speed controller and a 13 tooth gear, can easily used in practicality, gear motor supports working with low noise, low current and no sparks..
【WIDE APPLICATION】This dc geared motork kit is suitable for motorized bicycle, moped, mini bikes, pocket bikes and electric dirt bikes,scooters, e-bike, atv and so on..
【100% QUALITY ASSURANCE】We are very confident in the quality of this electric bike motor kit, and provide warranty or refund for it. Please feel free to reach us if you have any questions about your purchase..

Check Stock

DC 5V 12V 18V 24V 5A 150W PWM Motor Speed Controller, Mini Speed Control Switch, Speed Regulator with Stepless Variable Rotary Knob - for Electric Motor, Brush Motor, Car, Generator, Fan (DC 5-30V)

Wide voltage range - DC 5-30V PWM motor speed controller switch, rated output current 5A, maximum output current 15A, max power 150W.
Settable duty cycle, duty cycle upper and lower limits and working frequency - set up these 3 parameters according your own motors.
comes with start and stop button and can be controlled by external switch.
High percision digital encoder knob - can adjust the motor speed , more accurate and consistent than ordinary potentiometer, easy to match the value.
Soft-start protection - the current increases slowly when starting the motor, avoid the high shock current, effectively protect the motor and extend its service life.
Widely applications - good to control the output of power, brightness, speed.
perfect for DC drive motor, generator, LED lights, light bulbs, lamp, car, fan, micro-pumps, solenoid valves, micro-pumps, solenoid valves.
(Note: This product can only be used for DC brushed motors, not for brushless motors).

Check Stock

Family Sew FS-388 9\ Flat Bed Straight Stitch and 5mm Zigzag Portable Walking Foot Sewing Machine With Metal Parts for Upholstery

Cleated positraction belts combine with new geared hand wheel pulley, geared reduction pulley and geared motor pulley to eliminate slipping.
Special heavy duty motor attached up to 150 watts, 1.5 amps, twice as much as home sewing machines.
High lift walking foot with 1/4" clearance underneath the foot.
Uses standard upholstery needles: 135x17, size 22, 20, 18, etc..
Power: 6600 RPM, 150 watts, 1.5 amp motor.

Check Stock

Volodymyr Zelenskyy - Sixth & Current President of Ukraine - 8inch Bust

6V or 12V 30:1 Metal DC Geared-Down Motor 37Dx67.5L mm, with 64 CPR Encoder and Metal Mounting Bracket Kit, D-shaped Output Shaft 6mm Diameter and Long 16mm.
No-load Speed: @ 6V: 115 RPM, @ 12V: 330 RPM.
Stall Torque: @ 6V: 7.5 kg.cm (101 oz.in), @ 12V: 14 kg.cm (190 oz.in).
for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy. Compatible with Arduino Motherboards..

Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..

Check Stock

Greartisan DC 12V 60RPM 7Kg.cm 8mm Single Shaft Self-Locking Reversible Worm Gear Motor with Cable, High Torque Speed Reduction Motor, Turbine Electric Gearbox Motor

【High Torque & Lower Noise】: Long carbon brush high life, high precision gear design, small size, high torque, low noise, high efficiency..
【Positive-Negative Rotation】This type is miniature High Torque Electric Worm Gear DC Motor, which can change shaft rotation direction while the wiring positive andnegative be changed..
【Self-Locking】: Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock..
【Versatile】: The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of occasions that require special installation size..
【Application】: Boat, Car, Fan, Home Appliance, BBQ, Machinery and equipment, automation instruments, electric curtain, stage lighting, counter, faucet, safe, wet towel dispenser, vending machines, automatic monitoring and other modern art..

Check Stock

Metal Gear Motor, 1Pcs 25Mm Dc 12V 25Ga-370 Low Speed Metal Gear Motor for Electronic Lock, Robot, Electric Curtain, Electric Door, Micro Mixer(12V 300RPM)

This product is a DC gear motor with high precision metal gear, stable working.
This DC motor features large moment of force, low speed, and low noise..
The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life..
This motor is adopted of pure copper wire coil, with low heat and low loss..
Widely used in electronic lock, robot, electric curtain, electric door, micro mixer, monitoring equipment, pet feeding machine.

Check Stock

Fielect 2Pcs 6V DC Motor with Wire 7000RPM Micro Motor Electric Motor Round Shaft for RC Boat Toys Model DIY Hobby

【Dimension】 - Shaft Diameter: 3.17mm/0.12".
【Features】- DC micro motor is durable, stable performance, shockproof, wear-resistant, and high precision. It is an excellent substitute for rusty or damaged DC motors on the machine.
【Material】 - The electric motor is made of metal, and the output shaft is made of high-hardness copper, which has good toughness and impact resistance.
【Application】 - Micro motors are used in electronic game machine printers, rear-view mirrors, headlight beam level adjusters, car toys, DIY hand drills, electronic equipment, etc.

Check Stock