Top Mf52e Type Ntc Thermistor Reviews

uxcell NTC Thermistor Resistors 10D-9 2A 10 Ohm Inrush Current Limiter Temperature Sensors Pack of 20

[Small Probe]: NTC thermistor can measure the gap temperature that other thermometers cannot..
[High Sensitivity]: The thermistor is high sensitivity and wide operating temperature range(-50℃~125℃), which is easy to use..
[Widely Used]: Thermistors can be used as electronic circuit components for instrument circuit temperature compensation and temperature difference cold junction temperature compensation..
[Good Stability]: Thermistor has good stability and strong overload capacity..
B3950 100K 1% 60mm Thermistor. The model can be judged according to the length of the thermistor cable..

Check Stock

Ametherm SL22 1R020 (Pack of 2) NTC THERMISTOR,ICL 1 OHM 20% 20A 22MM, (Also SG100, SG301)

Pack With: Package of 10pcs 1% accuracy 10K thermistor, 60mm / 2.4in line length..
High Sensitivity: The thermistor is high sensitivity and wide operating temperature range, which is easy to use..
Wide Use: Thermistor can be used as electronic circuit component for instrument line temperature compensation and temperature difference cold junction temperature compensation..
Small Size: The NTC thermistor is able to measure the gap temperature that other thermometers can't measure..
Good Stability: The thermistor has good stability and strong overload capability, easy to process into complex shapes..

Check Stock

uxcell NTC Thermistors Resistor MF52-103/3435 10K Ohm Inrush Current Limiter Temperature Sensor Pack of 40

【Quality】 - Directly Inserted Negative Temperature NTC Thermistors have large material constant, large B value, with small residual resistance.Thermal shock resistance, with wide range of operating temperature..
【Feature】 - The NTC thermistors are reliable and stable, with wide range of over-current control..
【Advantage】 - With small size and large power, NTC thermistors have strong capacity to inhibit surge current..
【Application】 - NTC Thermistor is widely used for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..

Check Stock

Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2

Comes assembled and tested with a free bonus jst cable.
For charging single lithium ion/lithium polymer.
Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place.

Check Stock

FYSETC Prus i3 MK3 Upgrade Hotend Parts HT-NTC100K Thermistor Sensor High Temperature +250 Degrees 2 Pins for 3D Printer MK3 Extruder Heater Block 3Pcs

Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the....
The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300℃ for a short time using, can replace the....
The Customized Terminal Connector( XH2.54 2P with buckle) is specially for MK3/MK3S prus einsy boards, so please check before ordering. If for Prus....
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....
Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement..

Check Stock

BIGTREETECH 3D Printer Part 2 in 1 Out Hotend Multi Color Dual Bowden Extruder Full Kit with Silicone Sock for Titan MK8 Bulldog Extruders (24V Black Color)

Select high-quality Aluminum alloy 6063 material,and use refined sandblasting oxidation treatment of product shell to improve the surface texture.
The heat dissipation efficiency is increased to 40% compared with the existing similar products which can effectively reduce and avoid the occurrence of the throat plug.
The weight of the Nozzle is at least 20-30% lighter than that of the same type Of the products and the printing accuracy and printing quality can be effectively improved.
The new design can ensure that the size change of the total height of the products is less than 0.5-1.0mm, which is beneficial to mass production.
Hotend is compatible with both HT-NTC100K and NTC100K thermistor.

Check Stock

FYSETC 3Pcs Upgrade HT-NTC100K 3950 XH2.54 2 Pin Cartridge Thermistor Sensor Ender 3 V2 Hotend Parts High Temperature 250 Degrees for Ender 3 5 Pro CR10 A8 Maker Pro Heater Block

Upgrade HT-NTC100K 3950 Thermistor: Pack of 3Pcs. Note: Temperature measurement head cylinder diameter is 3mm, length 15mm, The connector is 2pin....
The temperature measurement: -20 °C ~ +250 °C for a longer lifecycle, sometimes can reach +300℃(but not recommand to use it long time)can replace....
Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. If need a....
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line....

Check Stock

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

Check Stock

Wholesale Sensors Replacement for Whirlpool 2188819 Thermistor 12 Month Warranty

The NTC thermistors Value: 1K ohm, 2K ohm, 5K ohm, 10K ohm,20K ohm, 50K ohm, 100K ohm, 200K ohm, 500K ohm, 1M ohm.
Characteristic: Small size and large power,large B value with wide range of operating temperature..
Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
Easy to store: Provide a high-quality box for easy management and storage..
More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.

Check Stock

Wholesale Sensors Replacement for Norcold 618548 Thermistor Assembly 12 Month Warranty

The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15.
Characteristic: Small size and large power，large B value with wide range of operating temperature..
Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification..
Easy to store: Provide a high-quality box for easy management and storage..
More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc..

Check Stock

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

（Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..

Check Stock

638285 Replacement Thermistor for Norcold, 12-Month Warranty

FEATURES: MF58 10K Ohm NTC Thermistors with B Value: 3950(+/-1%).
DESIGN: Glass sealed packaging with firm structure, small size and light weight, applicable in severe environments.
PERFORMANCE: High precision resistance, B values with high reliability and stability, high sensitivity.
APPLICATION: Suitable for related equipment with temperature measurement and controls thermal protection circuits in various family appliances.
PACKAGE: 20 Piece x Electrical Axial Lead NTC Thermistors Resistors.

Check Stock

Fielect NTC Thermistor Resistors 8D-20 6A 8 Ohm Inrush Current Limiter Temperature Sensors Pack of 5

High sensitivity. Quick response. Compact structure.
Easy installation, wide temperature range and good stability.
High reliability. Can provide different R.B value products.
Package includes: 2* NTC 3950 100K Thermistor.

Check Stock