Top Metric Bumper Bolts Reviews

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

...plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.

Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
Ideal for restoring the stripped threads on old, rusty nuts and bolts.
Hex shape makes taps and dies easy to turn with any socket or wrench.
Can be used on national coarse, national fine and metric nuts and bolts.
Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.

Check Stock

Swagman 2-Bike RV Bumper Rack

Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
Simple to use and supports various bike sizes, frames and wheels.

Check Stock

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..

Check Stock

Swagman RV Approved 4-Bike Bumper Rack

Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
Simple to use and supports various bike sizes, frames and wheels.

Check Stock

4 Sets Furniture Legs Mounting Plates with Hanger Bolts Screws Great for Furniture Leg,Chair, Sofa,Cabinet,Couche, Set of 4

Pack list: 4 Pcs M8 hanger bolts, 12 Pcs screw. Note: Our products belong to the metric M8 hanger bolts. If you find that you can’t screw the hanger bolts, the accessories may not match (the imperial system does not match the metric system). You can check it carefully before purchasing. If there is a purchase error, please contact us in time. You can get a refund for free..
Widdly use:The furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
Easy to Install: Sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable..
Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place..
Complete accessories: No need to purchase hanger bolts separately. You can follow the plan to install immediately,When you install product and found any questions,please contact us in time,Our after-saler team will support you immediately..

Check Stock

Genuine Yamaha YFZ450R YFZ450X GYTR Plastic Frame Skid Plate 18PF84N0U000

Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
The extruded U-nuts can be used to replace/fix to the bumper.
The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine....
Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details).
Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION....

Check Stock

Stainlesstown Nut Bolt Thread Gauge (Red)

Measures diameter, thread pitch & length of nuts, bolts & screws.
Measures fractional bolts from size #4 to 1" up to 7" long.
Measures metric bolts & screws from size 3mm to 22mm.
Made of very durable 1/4" thick hard plastic.
1/4" thick x 8-3/4" Long x 3-3/8 Wide Color: Red.

Check Stock

Stainlesstown Nut Bolt Thread Gauge (Blue)

Measures diameter, thread pitch & length of nuts, bolts & screws.
Measures fractional bolts from size #4 to 1" up to 7" long.
Measures metric bolts & screws from size 3mm to 22mm.
Made of very durable 1/4" thick hard plastic.

Check Stock

DURATECH Universal Wrench Set, Adjustable Wrench Set, SAE & Metric, 8-inch&10-inch, 44 sizes in 2 Piece, Drop Forged, ANSI standard

Drop forged, heat treated, double thread, mirror polish, and electroplating. Exceeds ANSI specifications..
Different sizes meet your different needs. The 8-inch universal wrench fits both standard 3/16 '' to 5/8 '' and metric 5mm to 16mm nuts and bolts.
10-inch universal wrench fits both standard 11/16 '' to 1-1/16 '' and metric 17mm to 27mm nuts and bolts, adjust the size by moving the middle push block..
The working torque reaches 1.2 times of the American standard of the double box end wrench, and the destruction torque reaches 1.4 times of the American standard of the double box end wrench..
Specialized wrench design allows work on multiple types of fasteners including 6-point, 12-point, square, E-Torx, triangle, and most rounded out fasteners..
This wrench can do both American standard and Metric. With this total wrench you can do so many thing without the need of changing wrenches of different sizes since this multi facet..
Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

Thread Gauge Combo-Mini

Set includes both Inch and Metric identifiers. Thread sizes are permanently laser etched on each gauge..
All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts..
Takes the guess work out of thread size and pitch on nuts, bolts , screws, threaded holes and many other threaded items..
Eliminates costly and time consuming repairs..
Great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility..

Check Stock

Nut and Bolt Thread Checker (Inch & Metric) Nut and Bolt Size Gauge- 14 Inch & 12 Metric New Individually Assembled Thread Gauge Suitable for Detecting Fixed Bolts or Threaded Holes in Enclosed Areas

...ore] Just screw the nut or bolt into the screw thread gauge, it takes you a few seconds to check the size. You do not need to drive forth and back to and from the hardware and auto parts stores for check any more. Also, this nut and bolt gauge is especially well suitable for the distinguish between similar inch and metric threads..
[Zinc Plated for Inch Size] Includes 14 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20..
[Black Oxide for Metric Size] Includes 12 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75. (The thread sizes are permanently stamped onto each 26 gauges, inch in black, metric in white)..
[Get Your Stuff Well-Organized] This nuts bolts organizer has 26 male/female gauges, all are the most used sizes for everyday use, which can help you well and fast sort out your assorted nuts and bolts and get them well organized and neater in your compartment box from misplace and loss. A great little toolbox if you use fasteners a lot or have a box/drawer/stake/garage full of random nuts and bolts..

Check Stock

Front License Plate Tag Holder Mounting Mount Adapter Bumper Kit Bracket for AUTO CAR TRUCK VAN SUV GOLF CART Quantity Discount (9.45$ to 5.60$)(each with 6 Unique Screws+Wrench+2 Built In Nuts) (1)

...OLF CART ⇧⇧⇧ ►???? Qty.:1 (9.45$).
► ???? Compatibility: It’s a design made to fit ALL MODELS with Flat Shape of the Bumpers. ► ???? Won’t work on Curved Spot of the Bumper or V Shaped Bumpers! ► ???? You can mount it on left or right side of the bumper also. ► ???? This is not an OEM bracket.
► ???? Holes: May require new holes in the front bumper! (Use your vehicle’s original screws if holes are already present on the bumper.) ►???? Screws Included: 2 SCREWS 4 BOLTS WRENCH & 2 BUILT IN NUTS for fast & easy installation (INSTALLATION INSTRUCTIONS! EASY 2 STEP INSTALLATION: 1) Attach mounting bracket to the front Bumper with 2 sharp screws. 2) Choose short flat bolts to attach just license plate to the mounting bracket or long flat bolts to mount license plate with frame).
► ???? Placement on Vehicle: Middle, Center, Front Bumper ► ???? Design: will fit all standard novelty/license plates issued by all 50 states. ► Dimensions: 2.5″ x 12″ (Can be used on USA, CANADA & MEXICO LICENSE PLATE STANDARD) ► ....

Check Stock