Top Meters Brass Part Reviews

Sesamee K646 4 Dial Bottom Resettable Combination Brass Padlock with 1-Inch Shackle and 10,000 Potential Combinations

  • Shackle clearance of 1 inch and 7/16 inch chrome plated molybdenum shackle.
  • All brass inner mechanism and four all brass dials.
  • Best used for job boxes, gang boxes, utility meters, substations, cable boxes, tool chests, boxes, cribs, and lockers.
  • Hardened steel full metal jacket and shroud.
  • Industrial strength combination lock that resists the strongest hammer and pry bar attacks.
  • Set your own combination 10,000 potential personalized options.
Check Stock

CCL Security Products Brass Sesamee K437 4 Dial Bottom Resettable Padlock with 2-1/4-Inch Hardened Steel Shackle and 10000 Potential Combinations, 2 1/4 Inch Shackle Clearance

  • Set-your-own 4-digit combination for convenience and security.
  • 10, 000 possible combinations which can be easily changed and set.
  • 2 inch wide solid brass case for superior security and weather ability.
  • Best used for job boxes and gang boxes, utility meters, substations, cable boxes, tool chests, boxes and cribs and lockers.
  • Shackle clearance is 2-1/4 inches and there are 4 dials.Solid Brass Body.Solid Brass Internal Mechanisms.Set your own combination 10, 000 potential personalized options.
  • Set your own combination 10,000 potential personalized options.
Check Stock

CT Sounds 1/0 Gauge CCA Complete Amp Wiring Install Kit AMPKIT-0GA-PRO

  • 17ft (5.5 meters) OFC 2-channel dual twisted-pair construction RCA interconnect cable, with black nylon wire loom and satin chrome tips. 17ft (5.5....
  • 3ft (.95 meters) Premium True-spec 0 Gauge OFC black ground wire with seamless ring terminal. 20ft (6.4 meters) OFC 18 Gauge remote turn on lead wire.....
  • One brass ANL/Mini-ANL Fuse-holder with 200A ANL fuse offers ideal protection for high powered systems.
  • 1pc 150A and 1pc 300A ANL fuses are included. One black rubber firewall grommet. Two 8 Gauge nickel plated spade terminals with red/black boots.
  • Four 16 Gauge spade terminals with red/black boots. Four 12 Gauge speaker terminals. Two Red 18 Gauge butt connectors. 10pcs 6” Black zip ties and....
Check Stock

Mares Mission 3 Compact Gauge Console

  • The Cressi Mini-Console PD2 is a small scuba diving console that houses the Mini-Manometer Pressure Gauge and the Analog Depth Gauge..
  • Mini-depth gauge reads to 70 meters (230 feet). Depth indications spaced out in first 12 meters (40 feet) for precise readings during safety stops. Maximum depth indicator..
  • Pressure gauge dial is color-coded in red, green and blue for instant readability. Reads pressures up to 350 BAR or 5000 PSI..
  • Both instruments built with chrome-plated brass case for maximum durablity. Compact rubber boot is textured for a sure grip..
  • Two connection loops, one on each side, for attaching a clip or bungee..
Check Stock

Prometheus Lights Beta Quick Release v2 Keychain LED Flashlight, Mini EDC Key Chain Flashlight, Multiple Light Modes, High CRI Pocket Flashlight (Brass)

  • QUICK RELEASE KEYCHAIN LED FLASHLIGHT - The intuitive design of the Brass Prometheus Beta Quick Release Keychain LED Flashlight allows you to easily detach the flashlight from your keychain when you need light. Accidental disengagement is virtually impossible. Engagement is verified by a solid click every time!.
  • SUPERIOR LIGHT QUALITY - See colors as you would on a bright sunny day. Cheap LED flashlights have a limited color spectrum that washes out your subject with a harsh "hospital" light. Our flashlight delivers 92+ CRI - a clear, natural light..
  • PROFESSIONAL GRADE, COMPACT SIZE - Precision-engineered components from premium materials make this flashlight lightweight and reliable. Fits in the palm of your hand. Add the Brass Beta to your keychain without adding bulk and weight. Perfect for EDC..
  • EVERY DAY CARRY FLASHLIGHT - The quick-release mechanism lets you effortlessly take it on and off your keyring. Adapts to all your needs, whether it's in the lab, office or home. Made for every day carry convenience..
  • SIMPLY & QUICKLY TWIST THE HEAD OFF & ON TO CYCLE THROUGH THE THREE LIGHT MODES! - Low/Medium/High. Low: 1 Lumen. Medium: 15 Lumens at 19 meters. High: 90 Lumens at 30 meters..
Check Stock

Sesamee 436 4-Dial Bottom Resettable Combination Brass Padlock with 1-Inch Hardened Steel Shackle and 10000 Potential Combinations

  • Set-your-own 4-digit combination for convenience and security.
  • 10,000 possible combinations which can be easily changed and set.
  • 2 inch wide solid brass case for superior security and weatherability.
  • Best used for job boxes and gang boxes, utility meters, substations, cable boxes, tool chests, boxes and cribs and lockers.
  • Shackle clearance is 1 inch and there are 4 dials.
Check Stock

Steel Craft Large Bowie Knife With Sheath 18 Inch Mirror Polished D2 Stainless Steel Bowie Knife - Razor Sharp Custom Bowie Knife For Men, Outdoor, Hunting Bowie Knives Eli1997

  • 8.125 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 2.75 inches Approximate Handle Length, 1.13 inches Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • High Quality Damascus Construction: 1095 High Carbon and 15n20 nickel (Over 200 Layers).
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

Whole Earth Supply Clip Point D2 D-2 Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 8.125 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 2.75 inches Approximate Handle Length, 1.13 inches Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

4 Your Home Hose Assembly Designed to fit All Dyson DC07 Models

  • Stretches to six times its own length to over 4 Meters.
  • Please note this part is a non genuine compatible spare part and the manufacturers’ names and part numbers have been used for reference purposes....
Check Stock

Whole Earth Supply Drop Point D2 D-2 Steel Partial/Hidden Tang Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 6.6 inches Approximate Overall Length, 3.5 inches Approximate Blade Length, 2.2 inches Approximate Handle Length, 1.3 inches Widest Part of Blank, 0.5 inches Widest Part of Handle (hidden tang style), 4mm (1/8 inch) Thick Approximately.
  • Quality D-2 steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place..
  • D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time. It is also much more resistant to corrosion than 1095. D-2 is called "semi-stainless", because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels. D-2 has high wear-resistance and abrasion-resistance properties..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock

Victorian Marine Antique Floor Standing Brass Telescope Navy Adjustable Vintage Home Decor

  • ...es will give you 15 X magnification, Portable small tripod is very very beautiful for your loved ones and will give authentic classical look to the place where installed..
  • Use : Decorative Telescope,Home & Office floor standing decor, Anniversary/Birthday/Marriage Gifts, Events etc. 1. Set a target near 200 meters , 2. focus the object by adjusting focus screw which is on the main tube near eyepiece , 3. Adjust focus screw both clockwise & Anticlockwise unit picture gets clear, 4. Once you are able to focus small objects you can look through larger distances.
  • A beautiful handmade solid brass floor standing telescope for your home & office table top decor.This classic solid brass harbor master telescope on mahogany tripod has excellent optics for viewing far away objects such as approaching ships. These have same magnification as were in the ancient one's. You may use this telescope for decoration purpose in your bed room, balcony, offices it will give you royalty status this will give you an eloquent look to your home and offices..
Check Stock

The Mad Tea Party / The Unbirthday Song / Twinkle Twinkle / Clean Cup Move Down / Mad Watch

  • 4 meters (13 feet) of wonderfully whimsical teapot bunting.
  • Perfect for all Mad Hatters at tea parties and Birthdays!.
  • Drape your teapot bunting in doors or in the garden.
  • 4 meters (13 feet) of bunting & 32 pennants in 8 curious designs.
  • Part of the stunning Truly Alice party range from Talking Tables.
Check Stock

Whole Earth Supply Drop Point 1095 High Carbon Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting

  • 7 inches Approximate Overall Length, 3 inches Approximate Blade Length, 3.375 inches Approximate Handle Length, 1.2 inches Widest Part of Blank, 1.125 inches Widest Part of Handle, 4mm (1/8 inch) Thick Approximately.
  • Quality 1095 high carbon steel, one-piece construction..
  • Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fixed to the blank with brass pins..
  • 1095 is a high carbon steel (not a stainless steel) and is commonly used in heavy duty tools. It can carry an extremely sharp edge. 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention. It is much tougher than premium stainless steels..
  • Blade comes sharpened. A final edge may be applied for an even sharper razor edge..
Check Stock