Top Meter Antenna Reviews

Diamond Original CR8900A Quad Band FM Mobile Antenna

  • The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
  • Designed specifically for the Yaesu FT-8900R.
  • The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
  • There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check Stock

1/3 Ct Diamond Solitaire Pendant Necklace in 14k White Or Yellow Gold

  • The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
  • Designed specifically for the Yaesu FT-8900R.
  • Heavy Duty Hex-Style Fold-Over, Multi-band, UHF female.
  • The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
  • There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check Stock

Smart Signal Meter with Integrated Channel Finder - Works with Any Antenna to Help Locate The Most Channels

  • App-enabled interactive Bluetooth technology signal meter makes it simple to position your antenna and receive the maximum number of free channels.
  • LTE filter chip set eliminates 3G/4G/5G LTE interference above 608 MHZ.
  • Connects to any amplified or non-amplified TV antenna.
  • Simple setup with professional results - Using both visual and audio indicators, you'll get real-time feedback for optimal antenna position and the best signal..
  • Signal meter makes it simple to position your antenna. The app shows a summary of available signals, and you can fine-tune individual channels for maximum reception..
Check Stock

Winegard RFL-332 SensarPro TV Signal Strength Meter, Black, 4.5 Inch

  • Includes: TV Signal Strength Meter with Adapter Kit, and a Coaxial Cable.
  • Perfect For: Provides you with an over the air signal strength meter for digital TV antenna – designed for terrestrial digital television broadcast.
  • Features: The signal finder meter flaunts an impressive LED feedback display, sensitivity adjuster and coaxial Cable for an easy installation.
  • VERSATILITY – Perfect for positioning stationary mounted antennas or can be used by travelers in RV’s looking to aim your directional antenna towards better signals in new or unfamiliar areas.
  • Quality Assurance: DTV signal finder Includes a US manufacturers warranty.
Check Stock

Winegard Flatwave Amped Pro HDTV Indoor Antenna with Bluetooth Signal Meter and Integrated Channel Finder, Up to 60 Mile Range

  • The FlatWave Amped Pro is the only antenna with an actual signal meter integrated into the antenna to provide the best possible customer experience when installing. The Flatwave Amped Pro uses a built-in tuner to get real-time signal data.Power Source Type: Corded Electric.
  • Captures signals up to 60 miles away, and Winegard’s built-in Clear Circuit Technology boosts reception, cuts dropout, and clears pixelation..
  • The ultra low noise (1 dB) digital amplifier is attached directly to the antenna for optimal performance..
  • Become a pro at installation with the Winegard Connected mobile app. Pair it with the integrated Bluetooth Technology signal meter and follow the on-screen instructions to discover the ideal antenna placement. Then connect the antenna to the TV, run a channel scan, and watch the maximum number of free HDTV stations available..
Check Stock

Authentic Genuine Nagoya TB-320A Fold-Over 39-Inch PL-259 Mount Tri-Band 2m/1.25m/70cm (144/220/440 MHz) Antenna, Includes NMO to UHF (SO-239) Adapter

  • Fold over design allows the Antenna to Fold-Over which allows you to easily put the antenna down in parking garages or in other places where height matters..
  • PL-259 with included NMO to UHF Adapter, Tri-Band VHF, 1.25M, & UHF (137-174, 220-225, 400-520 Mhz), Weatherproof.
  • The TB-320A is the ideal antenna for FM operation on 2 meter, 1-1/4 meter (220), and 70-cm bands..
  • Easy To Install, Omni-Directional, Requires NMO or UHF antenna Mount (Nagoya RB-50 Magnetic Mount Recommended), Measures ~38.5 inches, Stainless Steel Antenna.
  • Pairs Great with the BTECH UV-25X4 or BTECH UV-50X3.
Check Stock

Super Antenna MC2 SuperPlexer 2 Meter VHF Adapter for MP1 Series HAM Antenna HF Portable Amateur Radio

  • THIS IS: The model MC2 SuperPlexer by Super Antenna. The 2 meter band adapter for all Super Antenna MP1 series antennas. Designed as part of the /backpack /base /travel /mobile /portable antenna system for transmitting and receiving on HAM radio frequencies. Deploys in one minute by one person with no tools needed..
  • FREQUENCY RANGE: 144 MHz to 148MHz. When utilized with your Super Antenna MP1 series antenna (sold separately), this adapter provides simultaneous HF and 2 meters on the same coax cable. BAND: 2 meters. The MC2 SuperPlexer has no negative effect on HF operation, it can be kept on the antenna continuously..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 series Antennas and Equipment. Attaches by inserting between the MP1 SuperSlider and the mount. Also may be compatible with other mobile antennas such as manually tuned bug catchers, CB whips, bug sticks, and many other tunable mobile whips that have 3/8"-24 fittings..
  • POWER RATING: 500W SSB, 300W CW/DATA. SIZE: 20.0"x1.25"x1.25" (15x32x32cm). COLOR: Stealth Black and Metallic. WEIGHT: 12 ounces (200g)..
  • FITTINGS: 3/8-24 standard threads, male fitting on bottom, and male fitting on top of diplexer. CONTENTS OF PACKAGE: 1 MC2 SUPERPLEXER, 1 ER2 EXTENSION ROD, 1 MR2B RADIAL SET, 1 MR2....
Check Stock

Diamond Original SG7500A Dualband Mobile Antenna

  • The Diamond SG7500A is a 2 meter and 440 MHz (70 cm) mobile antenna. It is a 1/2 wave on 2 meters providing 3.5 dBi gain and a 2 x 5/8 wave on 440 providing 6.0 dB gain.
  • This antenna can handle up to 150 watts. VSWR: 1:1.5..
  • This antenna is approximately 41 inches (1.1 m) high. The antenna is black and silver. The connector type is UHF (for PO mount)..
  • This antenna does not include the mount or coax..
  • One of Diamond Antenna's Supergainer Premium mobile antennas..
Check Stock

Winegard Boost XT Pro - Outdoor Ultra-Low Noise Preamplifier + Integrated Channel Finder

  • The Winegard Boost XT Pro enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels. Only works with any passive/non-amplified antenna..
  • The integrated signal meter makes you the pro at installation. Pair with the Winegard Connected app for no-fuss antenna positioning..
  • TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels..
  • Winegard’s Clear Circuit Technology offers the lowest noise (1dB typical) to deliver more range and less signal dropout and pixelation..
  • Included components: Preamplifier, 110V adapter, hose clamp, USB power cable with 110V adapter, app-enabled Bluetooth technology signal meter, and printed documentation.
Check Stock

Super Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane

  • THIS IS: The model MR8075 SuperWire Radial Set by Super Antenna. It is designed for use with the MC80 SuperCoil on all Super Antenna MP1 series portable HF antenna systems. Made by Super Antenna for /backpack /base /travel /mobile /portable antenna systems for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to the 80 meter or 75 meter (3.5 to 4 MHz) ham band. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on c....
Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

Japard Satellite Finder Signal Meter with Level Display – Pointer Display Measuring Device with High Signal Sound, Checking Angle and Direction, No Battery Required

  • Includes: TV Signal Strength Meter with Adapter Kit, and a Coaxial Cable.
  • Perfect For: Provides you with an over the air signal strength meter for digital TV antenna - designed for terrestrial digital television broadcast.
  • Features: The signal finder meter flaunts an impressive LED feedback display, sensitivity adjuster and coaxial Cable for an easy installation.
  • VERSATILITY - Perfect for positioning stationary mounted antennas or can be used by travelers in RV's looking to aim your directional antenna towards better signals in new or unfamiliar areas.
  • Quality Assurance: DTV signal finder Includes a US manufacturers warranty.
Check Stock

MFJ-969 MFJ969 Original MFJ Antenna Tuner + SWR Meter (Manual - 1.8-50Mhz [160-6 Meters], 30/300W)

  • The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off switch, antenna switch and a 4:1 balun! (The light uses 12 VDC or 110 VAC with MFJ-1312D * Not included).
  • MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets you select 2 coax lines, random wire/balanced line or dummy load (direct or through)..
  • An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station..
Check Stock