Top Metal Ssd Case Reviews

Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64

Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
Installation Video refer to Geekworm WiKi search X820.
Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..

Check Stock

Geekworm for Raspberry Pi 4, X857 V2.0 mSATA SSD Expansion Board + X735 V3.0 Power Management with Safe Shutdown & PMW Cooling Fan Expansion Board (Not Include Raspberry Pi 4)

√[Important] It is strongly recommend to use 5.8G wifi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also pls format the new SSD before use..
√X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), Supports up to 1TB mSATA interface SSD hard disk..
√Update in 2022: X735 V2.5 has been update to X735 V3.0 version with width voltage DC 6V-30V input on march 28th 2022 and remove latching switch port. You must install shell script to enable the PWM fan to work since it need PWM signal to run, refer to X735 Software on WiKi..
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot).
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..

Check Stock

ZRM&E 1 Set 2.5 to 3.5 Inch SSD HDD Holder Kit Metal Mounting Adapter Bracket Dock for Desktop PC SSD Server Hard Drive Tray + SATA 3.0 Cable + IDE 4P Male to SATA 15 Pin Female Power Extension Cable

Good Quality: Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
High Compatibility: Supporting 2.5" hard drives such as SATA, IDE interface mechanical hard drive or SSD drives, compatible with SSD solid state disk and regular hard disks, with SATAI, SATAII, SATAIII..
Practical Use: Easily and safely install the 2.5 inch laptop hard disk onto 3.5 inch fixed support of desktop case with this metal mouting adapter bracket to use..
Easy Installation: The holes position is the same as 3.5 inch hard drive position ,the mounting adapter bracket can be put in the same place as the hard disk. Screws included for mounting the bracket onto the PC case..
Package Include: Pack of 1pcs 2.5" SSD HDD To 3.5" Mounting Adapter Brackets (Screws Included) + 1pcs SATA 3.0 Cable + 1pcs IDE to SATA Power Cable.

Check Stock

Geekworm Raspberry Pi 4 mSATA SSD Adapter X857 V2.0, Raspberry Pi 4 Model B X857 V2.0 mSATA SSD Expansion Board USB3.0 Module for Raspberry Pi 4B UASP Supported ONLY

√[Important] Strongly recommend to use 5.8G WiFi AP instead of 2.4G wifi AP, according to the feedback if use the external USB device (like mouse, keyboard, display) or use X857-C3 metal case(ASIN:B08VJ6P48B ), the system maybe unstable or not boot from the SSD. Also MUST format the new SSD before use..
√X857 V2.0 mSATA adapter only design for Raspberry Pi 4 Model B(1GB/2GB/4GB/8GB), UASP supported for Pi 4, NOT support TRIM, Supports up to 1TB mSATA interface SSD hard disk..
√ How to power RPi 4&X857 V2.0: 5Vdc +/-5% , Powered by Raspberry Pi 4 Type-C Power In port.
√ How to power RPi 4&X857 V2.0& X735: 5Vdc +/-5% , Powered by X735 Type-C or DC5525 Jack Power In port.
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
√ Matching metal case for RPi 4&X857 V2.0&X735/X708, pls refer to X857-C3 Case(ASIN:B08VJ6P48B ), BUT note the power control switch should be connect to X735(ASIN:B07R45W1LN)/X708(ASIN:B08DNRYM4Y), there is no PWR port for external power switch on X857 V2.0..
√ Allows booting OS from your HDD/SSD for fas....

Check Stock

Hard Travel Case for Samsung T3 T5 Portable 250GB 500GB 1TB 2TB SSD USB 3.0 External Solid State Drives by co2crea Black

co2CREA hard travel case replacement for Samsung T5 portable solid state drive Samsung external SSD or Samsung SSD T3 portable external solid state....
This Samsung SSD case perfect for your Samsung T5 portable external hard drive Samsung T3 portable SSD 1tb external solid state drives , and this....
co2CREA hard Samsung SSD external solid state drives case is a build-in super quality lining reflects superior taste and ensures a long-lasting....
This Samsung T5 portable SSD hard drive case has a special and strong zipper, which can bring you a better using experience..
For sale is CASE ONLY! (Samsung T5 portable solid state drive and portable hard drive SSD accesories are not included).

Check Stock

ORICO M.2 SATA B+M/B Key SSD Enclosure USB 3.1 Type C 5Gbps External Solid State Enclosure Adapter for 2280/2260/2242/2230 M.2 NGFF SSD 4TB Max, NOT Supoort PCIe NVMe/AHCI M.2 SSD -M2PF

Up to 5Gbps with UASP: ORICO M.2 NGFF ssd external case adopts control chip, with UASP acceleration protocol and USB3.1 Type-C output interface, reach up to 440+ MB/S write/read speed matched with your M.2 SATA SSD..
NGFF SSD Enclosure: Compatible with most M.2 SSD SATA based 2280/2260/2242/2230 B Key M.2 NGFF SSD up to 2TB such as Samsung 860 EVO / 850 EVO M.2 SATA III SSD, WD Green M.2 2280, etc..
Compatibility: Supports Window / Mac / Linux . This external hard drive case is suitable for connecting PC, smart phone, notebook computer, smart TV, smart router, PS4 and other devices. Plug and play, no driver needed..
Excellent Heat Dissipation: The copper bars with holes on the PCBA board rapidly radiating heat from internal SSD to external Aluminum case. The external case with heat exchange fin, for better heat dissipation under high-speed transmission..
More details: The LED indicator on nvme ssd enclosure shows working status of SSD. The lightweight and compact size making it easy to carry with you while on the go. NOTE: 【DOES NOT SUPPORT NVMe PCIe BASED M-Key and M&B-Key M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.】.

Check Stock

Geekworm X825-C8 (X825 V2.0) Metal Case+Power Switch+Cooling Fan Support X825 V2.0 2.5 inch SATA SSD/HDD Shield & Raspberry Pi 4 Model B & X735 Only(Not Include RPi4&X825 V2.0&X735&PSU&SSD&TF Card)

New X825-C8 metal case with power switch and cooling fan specially designed for X825 V2.0 (ASIN:B091JSRQ9C)& X735(ASIN:B07R45W1LN),NOT support X825 V1.5 version.Recommend to use with X735 power management board (X735(ASIN:B07R45W1LN.).
X825-C8 case Only compatible with X825 V2.0, NOT support X825 V1.5 version. User Manual refer to Geekworm WiKi search X825-C8.
We found that USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So when install the Raspberry Pi 4 in the case, if you find the 2.4G signal is unstable, please try to use WIFI 5G AP. (Please refer to WiKi X825#Document).
Also the Bluetooth signal will be affected if use the metal case..
Support Max 9.5MM thickness 2.5 inch SATA HDD/SSD installation；.
Packing List: 1 x X825-C8 Metal Case, 1 x Power Control Switch, 1 x 4010 Cooling Fan(with 4 pieces of screws), 1 x Mounting Screws Pack. Packing List not include the Raspberry Pi 4, X825 Board and 2.5 inch SATA SSD/HDD..
Important: The X825 V2.0 2.5" SATA Shield(ASIN:B091JSRQ9C)& X735 Power management board(ASIN:B07R45W1LN) need to purchase seperately..

Check Stock

UGREEN M.2 Enclosure SSD SATA B B+M Key NGFF to USB 3.0 Aluminum Adapter 5Gbps M2 Hard Drive HDD External Case Tool-Free UASP for 2230 2242 2260 2280

5Gbps Data Transfer: With USB 3.0 high speed interface, The SATA M.2 Hard Drive Case Caddy transmission rate up to 5Gbps, support UASP, 10 times faster than USB 2.0..
Tool-Free Installation: UGREEN USB 3.0 to M.2 NGFF Case is much simpler to install. No screw or screwdriver is needed. Just slide the back metal shell to open the caddy, then plug your M.2 SSD into the SATA NGFF B-Key connector and use the included fastener to secure it in place, and then close the lid. Plug&Play for Windows 10/8/7/XP/Vista, Mac OS, Linux, Chrome OS..
Elegant Aluminum and Compact: Made of premium aluminum alloy that does better at heat dissipation, no cooling fan is needed for your high-speed working M.2 NGFF solid state drives. The M.2 SSD Enclosure Box features a lightweight and slim size(L122*W40*H12 mm), making it portable to take with you and a perfect companion for your laptop while on the go. The soft white LED indicator lets you learn its working status easily..
Perfect USB to SATA NGFF Data Bridge: UGREEN M2 NGFF-to-USB Adaptor supports UASP ,S.M.A.R.T & TRIM, and comes with a 1.5ft USB 3.0 to Micro USB 3.0 cable, easily connecting NGFF M.2 SSD to a USB PC for fast file backup,disk upgrade,disk clone,data recovery and storage expansion. Als....

Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a single 2.5 inch SATA HDD/SSD. For the Simplified version with full size HDMI, refer to NASPi-Lite(ASIN:B09J8B7G3W).
Dual SATA refer to NASPi-Gemini(ASIN:B07VXF2HJG).
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case(Raspberry Pi 4 Case) to get a complete NASPi.
(X-C1 V2.0 support auto power on function, X-C1 V1.3 doesn't).
How to Power NASPi: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD thickness description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thickness..
Button switch operation: Press button 1~2 seconds to reboot, 3 seconds to safe shutdown, 8 seconds to force shutdown (need to install shell script firstly).

Check Stock

Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board UASP Supported Compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only(Not Include Raspberry Pi)

【Update】X825 V2.0 is the updated version from X825 V1.5. Metal case for X825 V2.0, refer to X825-C8(ASIN:B09295FHBW). Recommend to use with X735 safe shutdown board(ASIN:B07R45W1LN). You can use X825 V2.0 to DIY your family NAS via RaspNAS or OpenMediaVault etc. Document refer to WiKi search X825 V2.0.
√ X825 V2.0 can support up to 4TB 2.5 inch SATA hard disk drives (HDD)/solid-state drive (SSD), on theory the SSD capacity is no limit, but SSD thickness is limited by the standoffs height and it's case..
√ How to power RPi4&X825 V2.0: 5Vdc +/-5% ≥4A, Powered by Raspberry Pi 4 Type-C Power In port or DC jack of X825 V2.0.
√ How to power RPi4&X825 V2.0& X735: 5Vdc +/-5% ≥4A, Powered by X735 Type-C or DC Jack Power In port.
(Recommend Geekworm UL listed 20W 5V 4A Type-C power adapter(ASIN:B09J856PND)).
√ X825 allows booting OS from your HDD/SSD for faster app opens, web serving and file copying, refer to WiKi search X825 V2.0..
√ X825 for use with Raspberry Pi 4 Model B (1GB/2GB/4GB/8GB) only, does not support Raspberry Pi 3. For Raspberry Pi 3B+/3B use, refer to X820 (ASIN:B073CGQD9C)..
√ Note: NOT INCLUDE Raspberry Pi 4 board & SSD/HDD & Power Adapter..

Check Stock

AirCase Hard Drive Case/External Hard Drive Case|Store Power Bank,Travel Essentials,ssd,USB c hub,USB c Cable, Electronics|Use as Portable Phone Case|Water Resistant, Shockproof, Dust-Proof Organizer

COMPATIBILITY: This hard drive case is made up of Thick, Tough, Ballistic Nylon hard shell material, that provides extra strength & shock protection. This hard carrying case is Compatible with all 2.5 inch Hard Drive Disks like external hard drive, 2tb ssd, samsung ssd, seagate external hard drive, 1tb hard drive, 4tb external hard drive, 8tb ssd, 4tb hard drive, etc..
SECURED & MESH POCKETS: This rugged shell hard drive case comes with an elastic band to securely fasten the HDD/ SSD/ external hard drive. This portable hard drive case has a separate mesh pocket for USB cables, flash drives, chargers, Pen Drives etc..
SHOCK-RESISTANT: This external hard drive case has a water-resistant and shock-resistant design. This hard drive storage case has a Strong Zippered closure that allows quick and convenient access and usage. The Soft felt lining keeps your HDD/usb drive/SSD/snadisk har drive,etc., dust free..
EASY TO FIT: The Slim line design of this portable hard drive case allows the case to easily fit into any Backpack/ Briefcase/ Messenger Bag..

Check Stock

Geekworm T300 V1.1 2.5 inch SATA SSD/HDD Shield Storage Expansion Board Compatible with Jetson Nano A02/B01/2GB/4GB Developer Kit

Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
Ideal storage solution for Jetson Nano- 2.5" SATA HDD/SSD Shield.
for the T300 metal case, refer to ASIN: B07W7CNSR8.
for the T130 mSATA SSD shield, refer to ASIN: B088N6VZL8..
A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed.
Intelligent power management - Automatic powering off when system shutdown.

Check Stock

RETROFLAG NESPi 4 Case Raspberry Pi 4 Case with SSD CASE,USB-C Power Supply,HDMI Splitter Switch & Cooling Fan & Heatsinks for Raspberry Pi 4 Model B

【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB).
【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B....
【SSD CASE(NOT including SSD)】This NESPi 4 Case comes with NES Cartridge style case for 2.5'' SSD, easy to install your SSD, enjoy an overall....
【Strong Heat Dissipation】30x30x7mm Cooling fan with customize aluminum alloy specially designed for Raspberry Pi 4 Model B to get better heat....
【Access to All ports】NESPi 4 Case allows you to access to all ports of Pi 4B , and slots on the side of NESPi 4 CASE to allow more space for you....

Check Stock