Top Metal Shim Brackets Reviews

Air Shim Bag - 3 Pack

  • Air Shim Bag – 3 PCS Pack. 3 sizes in Small, Medium, and Large, to meet a variety of work needs..
  • Air Shim Bag – A variety of purposes, including moving and adjusting the level..
  • Air Shim Bag – Allows a single installer to hold the unit in place, accurately adjust and level..
  • Air Shim Bag – Improve work efficiency and reduce unnecessary labor..
  • Air Shim Bag – ABS+TPU+420D nylon commercial grade quality, durability and performance..
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

TEJATAN - Straight Steel Brace (Also Known as - Straight Bracket, Straight Metal Bracket, Steel Straight Brace, Steel Straight Brackets) (Set of 4)

  • Size - 6.1 inches X .7 inches , Constructed from high quality Steel, ensuring quality and longevity.
  • Color Silver - Easy to install, strong and durable.
  • Can also be known as straight brackets with screws , stainless steel flat bar , metal strap with holes , metal strapping with holes , metal strip with holes.
  • Can also be known as Mending Brace, Mending Plates, Straight Mending plates, Mend Brace, steel Mending plates , flat bracket , flat steel bars , metal strip with holes , metal straight bracket , brackets straight , straight brackets , straight brackets with screws , mounting bracket , straight metal brackets , flat bar with holes , furniture bracket , reinforcement bracket, metal strapping with holes , metal strip with holes , flat metal bar , stainless steel flat bar , steel plate.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes - Set of 12

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (3) 1/32 Rubber Shim, (3) 1/16 Rubber Shim, (3) 1/8 Rubber Shim, (3) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes -Set of 8

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (2) 1/32 Rubber Shim, (2) 1/16 Rubber Shim, (2) 1/8 Rubber Shim, (2) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock

AWX Heavy Duty Shelf Brackets 12 inches x 8 inches with Screws - 8 Pack Black Metal Shelf Brackets - Shelf Support Angle Brackets for Shelves - L Brackets Heavy Duty Floating Shelf Brackets

  • Easy To Install - With screws included mounting a metal 90 degree bracket has never been easier. Measuring 8 black shelf brackets 12 inches x 8 inches gives flexibility when deciding whether to use these corner brackets to make several small metal shelves or a large wall shelf..
  • Multiuse Shelf Options - With 8 hidden shelf brackets this floating shelf hardware can be utilized all over the house. Whether being used as decorative shelf brackets, open shelving for kitchen, bookshelf brackets, small metal shelf bracket, or even general shelving brackets the uses for these shelf mounts are endless..
  • Sturdy And Durable - Heavy duty wall shelves need to be with strong shelf brackets and our metal brackets are exactly that. Securely mounting shelf brackets & supports with screws to any surface gives peace of mind that our shelf support brackets will hold up to 600lbs..
  • Premium Quality Materials - Enjoy an industrial forged steel floating shelf with our 8 heavy duty wall shelf brackets. With all heavy duty L brackets, quality shelf hardware is our top priority with wall brackets for shelves made of high quality steel with a black coated finish..
  • AWX Promise - At AWX we stand by our products and offer a 31 day no questions asked promise if you experience any issue....
Check Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

  • 316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
  • Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
  • Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
  • Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
  • There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
  • Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.
Check Stock

KS E20 Bicycle Dropper Seatpost - 30.9 425/125mm - C228-125-30.9

  • Material: bicycle Seatpost Shim is made of high quality 6061 aluminum alloy, CNC machining CD texture surface ,anti-rust and durable.
  • Feature:Use this bike post shim, 30.9 ID Seat Post shim can be converted to 31.6 bike seat post, bike seatpost shim can help you change the bicycle....
  • Size: 31.6 to 30.9 seatpost shims. Length: 100mm..
  • Tips: Please check your bike frame seat tube outside diameter. Measure the inside diameter of your old clamp. Or measure the outside diameter of your....
  • Application: Bicycle Seatpost reducer matches well with most bicycles, such as MTB ,BMX ,mountain bike, road bike,and more, you can easily adjust the....
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

6 Pieces Brass Strip Brass Shim Stock Assortment 1 Width x 12 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness,Brass Sheet Metal Shims

  • ✔ If you happen to need some brass shim stock, you do not have to drive mile to hardware store to find these, our brass shim stock assortment with 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • ✔ Brass flat strip is made of brass material,has nice bend-ability and good processability, excellent conductivity, you can use it according to your requirement..
  • ✔ Brass strip has high strength, high hardness. It can still work well under hot condition and has good corrosion resistance..
  • ✔ Brass shim stock assortment size: 12" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness. Nicely polished up..
  • ✔ Brass shim stock widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock