Top Metal Roof Stove Pipe Flashing Reviews

Vent Systems 8" Inch Round Chimney Cap Galvanized Steel for All Weather Conditions Top Round Exhaust Cap with Rubber for Perfect Insulation Roof Vent Cap Vent Cover 8 Inch 200 mm

  • Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space.
  • Designed With No Moving Parts Ensuring Longer Product Life-Time.
  • Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind.
  • Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation..
  • Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product..
Check Stock

Dektite Premium #7 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6' to 12'

  • Flashing Base is 18" by 18" - Pipe Boot Fits 6" To 12" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects.
Check Stock

DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check Stock

Oatey 14049 Retro Master 0.25\-5.75\ Pipe Diameter Roof Flashing 8\ x 8\ Base, Black

  • Retro master flashing slides over vent pipe for pitch to 45 degree..
  • Flexible base conforms to most flat or contoured roof surfaces including clay tile and metal roofs..
  • Continuous temperature resistance to 212 degree f. Intermittent temperature resistance to 275 degree f..
Check Stock

3/4” x 30 ” Black Malleable Steel Nipples Fitting 3/4 Inches Threaded Pipe Nipples DIY Steampunk Industrial Vintage Style 10 Pack.

  • Flashing Base Diameter is 14-3/4" - Fits 6" to 11" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects.
Check Stock

DEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
  • Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check Stock

Cozy Co Butyl Rubber Waterproof Tape 4” X 50’ (White/Gray) Weatherproof RV, Roof Window Sealant, Flashing, Seam, Surface Crack, Pipe Rupture, Boat Sealing

  • Wider Yellow Paper Release Liner Make it Easy To Peel Off.
  • Roof, RV Sealant, Roof flashing, Window Flashing, Surface Crack, Pipe Rupture, Boat Sealing, etc..
  • Quality Of COZY Co Has Been Proved By Construction, Vehicle Industry For a Long Time..
  • Adhesion Increases Over Time. Long Lasting Usage.
Check Stock

Malco Portable Mini Brake, 48 In, 22 Ga Capacity

  • Bends up to 135 degrees in 22 gauge galvanized sheet metal.
  • Bends metal roofing components and roof flashing including copper and aluminum.
  • Ideal for fabricating plenums or large transitions at the job site.
  • Makes compact fabrications as small as a 4-inch square.
  • Accommodates sheet metal up to 4 feet wide.
Check Stock

Guide Gear Outdoor Stove Accessory Bundle

  • EXHAUST EXTENSIONS: Extend the exhaust of your outdoor wood stove with this 2 piece pipe extension set.
  • ADD ALMOST 4 FEET: Each pipe measures 5.5 inches in diameter and 21 inches long, extending your pipe by almost 4 feet.
  • THICK METAL: Crafted from durable metal designed to handle the heat.
  • Black finish prevents rust corrosion from exposure.
  • SIZED TO FIT: Compatible with the Guide Gear Large Outdoor Wood Burning Stove (item 718708.
  • Dimensions (Diam. x L): 5.5 x 21 inches (each).
  • Manufacturer warranty: Lifetime warranty.
Check Stock

Round Roof Rain Cap HVAC Vent Galvanized Steel All Weather Rain Cap Roof Top Round Roof Vent with Rubber Gasket for Perfect Insulation Vent Cover (4'' Inch)

  • Roof Cap For Air Exhaust, Protects From Rain And Wind.
  • Usable Such As: Roof Vent, Stove Pipe Cap, Roof Rain Cap.
  • Roof Cap. Best compatible with other standard REPA MARKET hvac parts..
Check Stock

IPS CORPORATION 86249 Roof Flashing 3-in-1 with Elastomeric Collar, 3 x 12 x 15.4 inches, Steel

  • The roof flashing is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes.
  • Constructed of a durable galvanized steel base to prevent rust and cracking.
  • Features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather.
  • Designed to direct water away from critical areas on the roof and prevent penetrations.
  • Compatible with any roof pitch up to a 45-degree angle.
  • Fits 1-1/4" or 1-1/2" 2" and 3" vent pipe.
  • Tested for ultraviolet ozone & weather resistance.
  • Galvanized base w/adjustable elastomeric collar.
Check Stock

Stove Pipe Collar Black 6

  • Gray Metal Products 6In Black Stove Pipe Collar 6-605.
  • Our products are assured for reliability and durability which has high quality and standard..
  • Our products are designed with the up to date designs and creativity..
  • We always work towards to fulfill the requirements of our end users.6 in., 24 Gauge Black Stove Pipe Collar.
Check Stock

Mr. Heater 4 inch Stainless Steel Horizontal Vent Kit for Big Maxx MHU50 and MHU80 Unit Heaters

  • F102860 Features: -All parts for complete venting. -Adjustable elbow. Product Type: -Vent kit/Diffuser. Material: -Metal. Number of Items Included: -9. Pieces Included: -adapter, b-vent pipe, 2 vent pipes, 90 degree elbow, wall thimble, roof flashing, storm collar, vent cap. Dimensions: -The thimble for through the wall use can expand about 4. Overall Height - Top to Bottom: -6.5". Overall Width - Side to Side: -13.5". Overall Depth - Front to Back: -37". Overall Product Weight: -13 lbs.".
Check Stock