Top Metal Reaming Tool Reviews

uxcell Chucking Reamer 1/4\

  • Specifications: Cutting dia.: 5.6mm / 0.22".
  • accuracy: D4. High-speed steel tool with cobalt is good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Reamer is with high hardness, toughness, wear resistance, long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

Utoolmart Chucking Reamer 3/4\

  • Specifications: Cutting dia.: 3mm / 0.12".
  • accuracy: H7. Tungsten carbide tool is hardened to 50HRC, good for general purpose applications.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings. Heat treated and quenched for stable performance, suitable for wide ranges of applications.
  • Round Shank: Can be used with a wide variety of tool holding systems. Good for use in through or blind holes and used for light cut, repair work, removing stock.
  • Features: Straight flute tool allows chips to collect in the flutes when cutting, well suited for applications in shallow cuts. Tungsten carbide reamer is with high hardness and strong wear resistance for long service life.
  • Application: Designed for accurate reaming in stainless steel, alloy steel and other metal materials, used on equipment including screw machines, turret lathes, drill presses and machining centers.
Check Stock

SKILSAW 80111 Worm Drive Saw Lubricant, Black

  • Multi-purpose cutting wax specially formulated to extend tool life and reduce chip welding when drilling, reaming, and threading metal. Ideal when cutting metal using twist drills, taps, annular cutters, carbide tipped hole cutters, reamers, and more.
  • Provides a precision finish with closer tolerances on finished work..
  • Formulated to cling to tools for a continuous shield against friction and heat.
  • Effective when cutting steel, stainless steel, aluminum and many exotic alloys.
Check Stock

Drill America 1-1/4\ High Speed Steel Straight Flute Taper Pipe Reamer, DWR Series

  • Self-feeding spiral design for extra-fast and easy hand reaming.
  • Suitable for hand reaming on pipe, sheet metal or for enlarging conduit box outlets.
  • The model 2-S reamer is not suitable for power reaming.
  • Pipe reamer has a 1/4-inch to 2-inch (6 mm to 50 mm) pipe capacity.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Pedrini Black & Satin Citrus Fruit Reamer

  • Handy for quick, clean and easy I. . reaming and . . beveling of 5mm-38mm (3/16"to 1 1/2")tube..
  • Metal body construction with long-wearing alloy steel blade..
  • Gives fast, professional reaming on copper, aluminum, brass and of tubing..
  • Used to remove burrs from metal pipes and plastic pipes.
Check Stock

uxcell Adjustable Hand Reamer 19-21mm High Speed Steel H8 6 Straight Flutes Milling Cutter Tool

  • High-speed Steel Tool: Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
Check Stock

General Tools 130 T Handle Reamer, 1/8-1/2 Inch (3.175mm-12.7mm) Tapered/Fluted, Guitar Woodworker Luthier Tool

  • ENLARGES HOLES: perfect for when a drill could cause cracking in materials.
  • LUTHIER/GUITAR TOOL: enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.
  • INCREASED LEVERAGE: T-handle provides leverage for easier reaming with greater control and easier turning.
  • REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 1/8" to 1/2".
  • ENLARGE & COUNTERSINK HOLES: In sheet metal, plastic and other materials with little effort.
  • DURABLE: made of hardened and tempered steel with precision ground cutting edges.
Check Stock

Pneumatic Drill Runs with Air Chuffs and Sputters

  • ECONOMICAL CHOICE: The IR 7807R Reversible Air Drill is a standard, economical pneumatic drill that’s best for service work requiring a compact, low....
  • APPLICATIONS: Use for drilling, reaming, or honing.
  • It's a durable, reliable tool for using on all types of materials, including sheet metal, wood and....
  • MAX POWER: Precision machine gearing ensures maximum power transfer and durability.
  • COMFORT + CONTROL: This air drill model is reversible with convenient control, has a comfortable lever throttle, and a durable Jacobs multi-craft....
  • GREASE PLUG: The drill features a grease plug for easy preventative maintenance.
Check Stock

Milwaukee 48-22-4106 6 in 1 Diagonal Pliers, 6-Inch

  • It also has easy to read wire gauge marking on both sides of the tool for stripping in either directions.
  • The handle is color coded, red meaning stranded wire.
  • Reaming Head Design-Smooth Edges of Metal Pipe From 1/2-Inch to 1-Inch (Patent Pending).
  • Bolt Cutter-Thread and cut #6 and #8 bolts to preferred length (Patent Pending).
  • High Leverage Design - For cutting power and performance.
  • Laser Hardened Cutting Edges - Cuts wire.
  • Offset Head Design - 15 Degree offset head for easier and quicker prying and pulling (Patent Pending).
Check Stock

GooM Inner-Outer Reamer,3/16-inch to 1-1/2-inch5mm-35mm) Pipe Reamer,Burr Remover for PVC Tubing,Tubing Chamfer Tool,PVC Pipe Deburring Tool,Red

  • Features 3-cutting edges,Ideal for reaming on copper,aluminum,brass and soft steel tubing.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • Sturdy plastic construction with stainless steel blades for extended tool life.
  • Pipe reamer has a 3/16-inch to 1-1/2-inch (5mm to 35mm) outside diameter capacity.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Pipe Cutter, Tubing Cutter Tool 1/8\ to 1-1/8\ Outer Diameter, Copper Pipe Cutter, Mini Tube Cutter for Thin Metal and PVC Pipe, Pipe Cutter Tool for Copper, Aluminum, Thin Stainless Steel Pipe

  • High hardness blade: The blade of this pipe cutter is made of high-strength manganese steel, which can cut metal thin tubes, and it is equipped with a standby blade..
  • Wide Application：The copper pipe cutter can be used to cut copper pipe, aluminum pipe,galvanized pipe,corrugated tube,PVC and thin stainless steel tube..
  • Reasonable Design：The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • Sturdy and durable:The metal cutter tool is made of stainless steel except for the rotating handle made of plastic to ensure its durability..
  • Including deburring tools:There is a deburring tool attached with the pipe cutter tool, made of sturdy steel. It can deliver quick, clean and easy inside diameter reaming of different tubes..
Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

  • Ideal for reaming on stainless steel and copper tubing.
  • 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
  • Hardened steel construction for maximum durability.
  • dual inch and metric measurement bar for ease of use.
  • Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.
Check Stock