Top Metal Powder Injection Molding Reviews

IRWIN VISE-GRIP Forged Crimper, 10', 2078310

  • Designed for crimping insulated and non-insulated connections and terminals on 10-22 AWG wire.
  • ProTouch grips provide extra comfort and reduces hand fatigue.
  • Durable constructed using a Metal Injection Molding (MIM) process for exceptional strength and performance.
Check Stock

BONDiT A-43 Adhesion Promoter, Primer, Adhesive, 2 oz. Bottle

  • General purpose primer and adhesion promoter for injection molding to metal and glass with polyethylene, polypropylene and polyolefins..
  • A one-part, one coat, thin film when cured..
  • Cure is ambient 30 to 60 minutes, or 75°C for 15 minutes, or 150°C (302°F) for 5 minutes..
  • Viscosity @ 25°C, ASTM D445 4.5-8.5 cps..
Check Stock

2xhome Set of 4 Stackable Mid Century Modern Clear Ghost Side Chairs Dining Room Victoria Transparent Crystal Polycarbonate Plastic Acrylic No Arms Molded Accent Living Desk Office Guest Small Space

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some....
  • Set of 4 Victoria ghost chairs - Single mold injection.
  • Made from Polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party,....
Check Stock

Baby Casting Kit,Plaster Hand Mold Casting Kit, Keepsake Hands Casting Kit, DIY Hand and Footprint Keepsake, Baby Hand Casting Kit and Foot Casting Kit for First Birthday, Christmas & Newborn Gifts.

  • ✨【Baby Keepsake】Our deluxe infant casting kit is the perfect molding keepsake to remember your little one's most precious moments. Our casting kit allows you to capture every detail before you blink and they're all grown-up. The unique rubbery molding captures every fine line and fingerprint, even if baby wiggles..
  • ✨【Newborn Kit】This adorable kit comes with 1 x Clone Powder (50g),1 x Model Powder (50g),1 x Gold Powder (4g),1 x Silver Powder (4g),1 x Rolling pin,1 x Sandpaper,1 x Instruction Manual,1 x Plastic molding container. Our deluxe infant casting kit is the perfect molding keepsake to remember your little one's most precious moments..
  • ✨【For Babies 0-10mths】Ideal for infants up to 10 months of age, this kit includes enough molding & casting material for a practice cast. More molding & casting material than any other on the market! Our high quality alginate molding powder is commonly used in dental molds and is non-toxic and 100% safe for babies’ sensitive skin..
  • ✨【Catch Every Precious Detail】The unique baby molding formula of the hand casting powder refill kit can capture each fine line and fingerprint, even if baby wiggles, that let everyone have a unique hand model in the world. Our deluxe infant casting kit is the perf....
Check Stock

G5 Outdoors Montec Broadhead (Pack of 3), Pink, 85 Grain

  • The Pink Montec is easy to re-sharpen, and has a large 1" to 1 1/8" cutting diameter. With no components to assemble or replace this is a very simply to use "screw on and shoot" broadhead.
  • Metal Injection Molding, creating a tough 1-piece 100% steel construction broadhead.
  • This listing is for a pack of 3 Broadheads.
Check Stock

G5 Outdoors Montec Crossbow Broadheads (3-Pack), 100 Grain

  • This High Speed Crossbow Model is ideal for all crossbows. With no components needed to replace or maintain, it's easy and simply to use..
  • Due to the strong tapered blade design's and angle it allows the Montec to be easily re-sharpened..
  • Available in 100 and 125 Grains with a 1" to 1 1/8" Cutting Diameter.
  • One-Piece Metal Injection Molding Construction.
Check Stock

Hand Casting Kit 3D,PewinGo Plaster Hand Mold Casting Kit|Hand Mold Kit Couples,DIY Gifts Ideas for Couples,Valentines,Engagement,Anniversary,Family,Child,Wedding,Boy/Girlfriend

  • ...christmas gift for him/her,men/women,couples,family, boyfriend/girlfriend,husband/wife,parents/mom/dad,adult/kids/babys.Having some fun for your family and keep precious memories, this hand casting kit is a great way to capture the moment..
  • The Most Comprehensive Hand Molding Kit for Family -Ideal hand sculpture kit for 2 adult hands,1 adults and 2 small child hands. Includes a 3L Plastic Molding Bucket, Premium Alginate Molding Powder (450g), Premium Casting Stone Powder (1200g), 1 wood roller Stick, 2 Sandpapers, 1 Round Wood Base, 1 Plastic Tablecloth (100x100cm), Practice Kit (50g Alginate Molding Powder + 50g Stone Casting Powder), 1 Instruction Manual, 2 Gloves, 1 Safety Pin..
  • Practice Makes Perfect– This plaster hand mold casting kit includes a small practice kit (50g Alginate Molding Powder + 50g Stone Casting Powder) to use before you create your final masterpiece. By practicing with the practice hand mold kit, you and your family can have the most beautiful plaster of pairs plaster figure possible..
  • Safe for Your Skin-our hand mold kit couples is 100% safe for the skin.Our high definition moulding solu....
Check Stock

2xhome Louis Large Transparent Vanity Mid Century Ghost Chair, Clear

  • Made from crystal Clear transparent polycarbonate (stronger than acrylic).
  • Some assembly required, chair Back screws to seat with 2 Hex screws (included), stackable and UV protected.
  • Ideal for indoor or outdoor, home and office use - living rooms, dining rooms, bedrooms, nurseries, waiting areas, parties, banquets, wedding party, and matching with your dining table..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
Check Stock

2xhome - Set of 4 (4 Chairs in Total!), Black, Victoria Style Ghost Side Chairs Dining Room Chairs - Victorian Accent Seat - Lounge No Arm Arms Armless Less Chairs

  • Set of 4 (4 chairs in total!), Victoria ghost chairs Black chairs - Single mold injection.
  • Made from Black polycarbonate (stronger than acrylic).
  • Arrives fully assembled, Stackable and UV Protected.
  • Ideal for indoor or outdoor, home and office use - Living Rooms, Dining Rooms, Bedrooms, Nurseries, Waiting Areas, Parties, Banquets, Wedding party, and matching with your dining table. Etc. Multiple colors available - Clear, Smoke, Black, White (Please see our others listing!)..
  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected..
Check Stock

G5 Outdoors Montec 100 Grain 1-1/16\ Cut Broadheads (3 Pack)

  • The blade angle is designed to allow for repeated maximum penetration and devastation..
  • One-Piece Metal Injection Molding Construction, with no parts needed to replace or maintain. This broadhead is easy and simple to use, simply screw on and shoot..
  • Due to the strong tapered blade design's and angle it allows the Montec to be easily re-sharpened..
Check Stock

uxcell knurled Insert Nuts - 25Pcs 1/4\-20 Female Thread Brass Threaded Insert Embedment Nut for 3D Printer

  • [Thread Size] - Thread Diameter: 1/4"-20.
  • [Material] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance.
  • [Feature] - It can be installed into a plastic matrix by ultrasound or heat during the injection molding process..
  • [Easy to Install] - The knurled insert nut has a guide, so no countersink is required. The surface is smooth, firm and even, and easy to install..
  • [Application] - Can be widely used in 3D printing injection molding to achieve tight fixation..
Check Stock

2xhome - Set of 4 Clear Dining Room Ghost Chairs Large Size Polycarbonate Plastic Modern Accent Side Chairs, Clear

  • Made from Durable UV Resistant Polycarbonate (Not Stackable).
  • Minimal Assembly Required, Chair Back Screws To Seat with 2 Hex Screws (included).
  • Ideal for Indoor or Outdoor Use - Home, Office, Parties, Banquets, Weddings, and Matching with Your Dining Table.
  • Single injection molding will have molding line and injection point at some spots. Due to the glossy finish of the clear chair, you may notice some swirls. Slight blue/purple hue may appear on the chair but will fade out over time..
Check Stock

[ J&J Products ] M3 Brass Insert, 5 mm (Length), Female Thread, Heat Sink/Injection Mold Type, 100 pcs

  • Insert Type: Heat Sink / Injection Molding.
  • Size: 5.5xM3x5, OD: 5.5mm, Thread: M3, Length: 5mm.
  • Create more polished, professional products.
  • Securely and permanently add metal threads to 3D printed parts.
Check Stock