Top Metal Motor Cover Reviews

Krups ZX720143 Acrylic Juicer White

  • 30-watt citrus juicer with fountain accessory for juicing directly into a glass.
  • Pressure-activated motor works in both directions to extract maximum juice.
  • Stainless-steel metal grid and anti-slip motor base.
  • 2 settings for extracting juice with or without pulp.
Check Stock

Beleeb Metal Exhaust Home Ventilation Blower 12 Inch Wall Mount Heavy Duty Aluminum Air Duct Fan with Power Cord Strong Airflow 635 CFM for Window Office Greenhouse, Black 14'*14' Panel

  • Metal exhaust fan--Made with metal material, this heavy duty ventilation fan can’t be broken easily compared to plastic material, that’s ideal for garage, greenhouse, shop, industry..
  • Powerful blower-- 12” wall mount fan with big airflow 635 CFM, providing cooling performance, removing excess heat, moisture, and smoking from kitchen, factory, grow tent..
  • Simple design-- Grille in both front and back keeps leaves out.
  • And corrosion resistant aluminum blades keep a long service time for you..
  • Safety motor with cover-- Motor has an enclosed cover to make sure electricity isolation, so you can use it in safe..
  • Wide Application--37 watts power, 110 volts cold( without charging plug) for DIY on wall or window..
Check Stock

Hatteker Foil Shaver Bald Heard Shaver Barber Clipper Electric Shaver Cordless Electric Razor Rechargeable

  • 【Double Foil Shaver】Double floating cutter head work more efficiently, 0.02mm Ultra-thin knife net fits your face curve perfectly, geometric pattern grid to capture hair more evenly. Shave easily and smoothly..
  • 【High Quality Motor】Hatteker Metal Double Foil Shaver is a full-sized metal foil shaver equipped with a powerful rotary motor. This foil shaver will not pulling hair or scratch sensitive skin..
  • 【Product Characteristic】Best for finishing fades and removing stubble.Gold titanium hypoallergenic foil for irritation-free shaving.Powerful and quiet rotary motor..
  • 【FAST USB CHARGING】The powerful battery of this shaver for men deliver a full 180 minutes shaving after 2 hours full charging. Note: Pull out the head protection cover directly when opening, do not press the button next to it.
  • 【LED Display】When the battery is almost out of power, the red light at the bottom will flash, and the red light will turn into a blue light when it is fully charged..
Check Stock

Beleeb Metal Exhaust Home Ventilation Blower 10 Inch Wall Mount Heavy Duty Aluminum Air Duct Fan with Power Cord Strong Airflow 490 CFM for Window Office Greenhouse, Black 11.5'*11.5' Panel

  • Metal exhaust fan--Made with metal material, this heavy duty ventilation fan can’t be broken easily compared to plastic material, that’s ideal for garage, greenhouse, shop, industry..
  • Powerful blower-- 10” wall mount fan with big airflow 490 CFM, providing cooling performance, removing excess heat, moisture, and smoking from kitchen, factory, grow tent..
  • Simple design-- Grille in both front and back keeps leaves out. And corrosion resistant aluminum blades keep a long service time for you..
  • Safety motor with cover-- Motor has an enclosed cover to make sure electricity isolation, so you can use it in safe..
  • Wide Application--30 watts power, 110 volts cold( without charging plug) for DIY on wall or window..
Check Stock

Lancer Tactical LT-25 Gen 2 M4 AEG Airsoft Rifle (Tan with High FPS)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • Polished 6.03 mm tight bore inner barrel for improved air seal and accuracy Full metal Version 2 rear-wired gearbox provides easy battery access and ample space 20mm top optic rail mounts scopes, sights, and magnifiers.
  • Enlarged trigger guard accommodates users wearing gloves One-piece outer barrel provides stability and zero wobble Upgraded gearbox with 18:1 steel gear set and high-speed motor.
  • High capacity magazine holds 300 rounds and only needs one full wind up Retractable crane stock adjusts to meet the battle situation Simple battery placement is sealed with a cover located in the back of the stock.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • Fires in full-auto and semi-auto, with a functional safety Full metal version 2 gearbox with an upgraded torque motor 20mm top optic rail mounts scopes, sights, and magnifiers.
Check Stock

Metabo - 9' Angle Grinder - 6, 600 Rpm - 15.0 Amp w/Brake, Non-Lock Paddle, Electronics (606479420 24-230 MVT), Professional Angle Grinders

  • Powerful 15.0 AMP motor delivers 6,600 RPM for faster material removal.
  • Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations.
  • Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders.
  • ""Tool-less"" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles.
  • Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life.
  • AC/DC switch for use with alternative power source.
  • Lower vibration rear and side handles includes soft grip for more comfort and control.
  • Externally accessible brushes for easy serviceability.
  • Large rubber tool rest to help protect tool and surfaces from damage.
  • Rugged all metal gear housing for added protection.
Check Stock

SENDUO Upgrated Mini Lathe 7\X14\

  • The mini metal lathe features a 550w brushed motor, 110V 60hz. High grade iron construction with robbert feet to be solid and stable turning, drilling, threading and cutting performance. Two rails offer smooth and durable moving..
  • MT4 Spindle speed range 0-2250±10%RPM,have a digital display,which is convenient for customers to operate,the speed levels can be adjusted for different metal workings. The mini lathe machine with a soft start button ,features forward and reverse design..
  • Power metal lathes are with Large Center Distance 13.78"/350mm and Swing Over Bed: 7.09"/180mm. K11-100 3-jaw self-centering chuck with 3 internal jaws and 3 pcs external jaws.Cover and long splashguard offers a clean working and safer condition .the cover have an automatic power-off protection function ..
  • Benchtop Lathe with 4-way tool rest, can help changing and adjusting cutting tools at different directions easily. Loose the fix handle, then you can move the tailstock forth and back.
  • Widely Used-Ideal for sample processing, mini precision parts processing, and modeling works.equiped with Metal gears,Aluminum handwheel,and extra set of the metal gears ,an extra lamp and free 7PCS lathe carbide tool.
Check Stock

Mophorn 110V 600W Sewing Machine Servo Motor Max Speed 4500RPM Energy Saving Mute Tie Bar Brushless Servo Motor for Industrial Sewing Machine

  • 600W Servomotor: The sewing machine motor is standardly designed with Power: 600W, Voltage: 110V, Frequency: 60Hz and Speed Control: 500-4500RPM. Braking power, responsive, high sensitivity, low noise drive, almost no vibration, energy saving and environmental protection..
  • Pure Copper Coils: Servo sewing machine motor features pure copper coils withstanding high temperature working condition. Long lasting and reliable..
  • Variable Speed Control: Unique tie bar design to make your work easy. Easy to adjust speed up to 4500RPM and motor direction with buttons. Easy to read LED display..
  • Sturdy Construction Design: High quality plastic and thick metal frame, smooth appearance. Strengthened motor base for increasing stability. Pulley, sprocket cover and mounting hardware included..
  • Effortless to Install: Smaller and more lightweight than a comparable clutch motor. Easy to install, the same as the general motor installation method, without any modification. Ideal for industrial sewing machine with clutch motor, including high head machine, zigzag seam, layering machine, etc..
Check Stock

Mophorn 110V 750W 1HP Sewing Machine Servo Motor Max Speed 3500RPM Energy Saving Mute Tie Bar Brushless Servo Motor for Industrial Sewing Machine

  • 750W Servomotor: The sewing machine motor is standardly designed with Power: 1hp 750W, Voltage: 110V, Frequency: 60Hz and Speed Control: 500-3500RPM. Braking power, responsive, high sensitivity, low noise drive, almost no vibration, energy saving and environmental protection..
  • Pure Copper Coils: Servo sewing machine motor features pure copper coils withstanding high temperature working condition. Long lasting and reliable..
  • Variable Speed Control: Unique tie bar design to make your work easy. Easy to adjust speed up to 3500RPM and motor direction with buttons. Easy to read LED display..
  • Sturdy Construction Design: High quality plastic and thick metal frame, smooth appearance. Strengthened motor base for increasing stability. Pulley, sprocket cover and mounting hardware included..
  • Effortless to Install: Smaller and more lightweight than a comparable clutch motor. Easy to install, the same as the general motor installation method, without any modification. Ideal for industrial sewing machine with clutch motor, including high head machine, zigzag seam, layering machine, etc..
Check Stock

Lancer Tactical 9.6V NiMH 1600mAh Butterfly Mini Battery Pack with Mini Tamiya Connector for Airsoft Guns, AEG

  • MATERIALS Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • Polished 6.03 mm tight bore inner barrel for improved air seal and accuracy Full metal Version 2 rear-wired gearbox provides easy battery access and ample space 20mm top optic rail mounts scopes, sights, and magnifiers.
  • Enlarged trigger guard accommodates users wearing gloves One-piece outer barrel provides stability and zero wobble Upgraded gearbox with 18:1 steel gear set and high-speed motor.
  • High capacity magazine holds 300 rounds and only needs one full wind up Retractable crane stock adjusts to meet the battle situation Simple battery placement is sealed with a cover located in the back of the stock.
  • BATTERY Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • Fires in full-auto and semi-auto, with a functional safety Full metal version 2 gearbox with an upgraded torque motor 20mm top optic rail mounts scopes, sights, and magnifiers.
Check Stock

VEVOR Metal Chop Saw, 14\/355 MM Blade Diameter Cut Off Saw, 2200W 3900RPM Steel Cutting Machine, 0-45° Adjustable Dry Cut Chop Saw, Max Rectangle Metal Pipe 4.7\/120 MM Miter Saw For Cutting Metal

  • Superior Cutting Capacity: Our electric metal chop saw, coming with a 14-inch blade, features a 4"/100 mm cutting depth of solid/hollow steel pipe. Max cutting capacity of rectangle metal pipe: 4.7"/120 mm..
  • 2200W Powerful Motor: The 500 W motor of the saw with low noise, high efficiency provides a rotation speed of 3900 RPM. Because of the powerful motor, the sawing machine can cut different materials quickly..
  • Precise Cutting: 0-45° miter cutting function makes your operation effortless and accurate. And it is equipped with an adjustable clamping fence and a removable ruler. The clamping fence can be pushed in to clamp the tube, and the ruler is for accurate measurement..
  • Security & Portable Design: This chop saw for metal cutting boasts durable construction with a cast aluminum base, making it stable enough. And the metal cover provides protection during your work. The portable handle and the flexible blade are designed for easy carrying and storage..
  • Wide Application: Our abrasive chop saw is ideal for factories, workshops, and job sites. It cuts your metals squarely and smoothly, providing an instantly workable finish. It can cut steel, aluminum, stainless steel, other metals, and wood..
Check Stock

BILT HARD 10 inch Drill Press with T-Track Kit, 12 Speed Benchtop Drilling Machine, CSA Listed

  • Powerful Motor: 6.2A 3/4 HP motor. 10 inch swing, 2-9/25" spindle travel, 5/8" keyed chuck..
  • T-Track Kits: 2* 22" T-Track, 1* 8ft ruler (sticky back), 3* T-Bolt, useful accessories for you to make a drill press table..
  • 12 Variable Speeds: 350/450/550/620/720/780/1120/1160/1430/2020/2360/3000 RPM via the belt adjustment. Specially designed for wood working, Low speed for hard object or sheet metal..
  • Sturdy Construction: the steel frame ensures durability and accurate drilling, steel base contains predrilled holes for mounting onto a table or work stand. (the top cover is plastic).
Check Stock

RC Motor Cooling Fans Surpass Hobby Twin 30mm RC Car Motor Fan with Metal Cover 4068 4274 Brushless Motor Heatsink for 1/8 1/10 RC Car 40mm 42mm Brushless Motor

  • ▶【Diameter 40MM RC Motor Cooling Fan】 Dual fans with heatsink, designed for 1:8 scale rc car and the rc motor which diameter is 40mm, such as....
  • ▶【Prevent Motor From Overheating】 The speed can reach up to 27000 RPM, excellent heat dissipation effect to protect the motor and extend motor's....
  • ▶【Exquisite Workmanship】 Made of high quality metal material, exquisite workmanship make this cooling fan is durable for long term use..
  • ▶【Unique Design with Extension Cable】 the fan is black body with cool silver and black color heatsink, the fan with extension cable for easy to....
  • ▶【Easy to Install】 Dual cooling fan compatible with carbon fan cover for protecting the rc fans, easy to Install. Notice: The plug is not....
Check Stock