Top Metal Hardware Machining Parts Reviews

NICECNC Golf Cart Metal Clutch Puller Tool Compatible with Yamaha G1 G2 G9 G11 G14 G16 G22 1979-2006,Replaces 90890-01876-00

☆ Condition: 100% Brand New AFTERMARKET PARTS, Qty:1 x Clutch Puller Tool.
☆ Reference Parts Number: E-P-I-G-C-P-1,Replacement for 90890-01876-00.
☆ Surface Finish: Metal, Manufactured from the highest quality steel.
☆ Precise machining for accuracy, Heat treated for superior strength.
☆ Easy to Install and No Installation Included..

Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..

Check Stock

Anovo Two Point Traditional Sling Attachments Mounts with 3 Pieces Sling Swivel Studs

【Perfect Design】：The close machining tolerances provide flawless fit and silent operation..
【Tri-Lock System】: They have both a knurled knob and are spring loaded..
【All-Metal Material】: All parts are made from high-strength steel. No plastic parts and black finish..
【Easy to Install】:Simply turn the knob clockwise to securely close and lock the pin.Turning counterclockwise and pushing out on the knob releases the locking latch to pivot for attachment and removal..
【What You Get】: Set of 2 traditional mounts with 3 pieces studs set every purchase:1 piece 1/2 inch screws,1 piece 3/4 inch screws and 1 piece 7/8 inch machine screw..

Check Stock

RYET LED bulb E12 200 lumen globe opal - 2 Pack

IKEA REPLACEMENT PARTS: Spare parts to replace lost or damaged bed frame parts..
BED HARDWARE FOR HEMNES: Includes most bed hardware needed to assemble IKEA HEMNES bed frames..
IKEA SPARE PARTS FOR ASSEMBLY: Includes IKEA screws, nuts, and more bed parts..
STRONG FURNITURE PARTS: Industrial strength zinc metal oxide parts for maximum support..
FITS ALL BED SIZES: Spare parts fit King, Queen, Double, Single and all colors..

Check Stock

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..

Check Stock

IKEA HEMNES Bed Frame Hardware - IKEA Replacement Parts for Assembling IKEA Beds

IKEA REPLACEMENT PARTS: Spare parts to replace lost or damaged bed frame parts..
BED HARDWARE FOR HEMNES: Includes most bed hardware needed to assemble IKEA HEMNES bed frames..
IKEA SPARE PARTS FOR ASSEMBLY: Includes IKEA screws, nuts, and more bed parts..
STRONG FURNITURE PARTS: Industrial strength zinc metal oxide parts for maximum support..
FITS ALL BED SIZES: Spare parts fit King, Queen, Double, Single and all colors..

Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

Each center drill has a double end and with standard milling Angle 60 °.
Used for parts that need to be machined between production centers or work piece center holding.
Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
These center drill set are made of high speed steel, high hardness and durable in use.

Check Stock

60W 12000RPM Mini Milling Lathe，100-240V DIY Mini Lathe Mini Miller，Mini Metal Lathe DIY Miniature Milling Machine Miller

✔〚Specification〛: ⓵Motor Speed :12,000rpm ⓶Input voltage/current/power:12VDC/5A/60W ⓷Axis Y and Z Travel: 32mm ⓸Axis X Travel: 145mm ⓹Collet: 1-6mm ⓺Maximum Clamping Size of Vice: 50mm ⓻Working Material: Lignin plastic, soft metal (gold, silver, copper, aluminum etc.), acrylic, plastic, etc.
✔〚Main parts〛: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal..
✔〚High precision〛: Maximum motor power is 144W by using more powerful motor. Motor case and headstock are jointed.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
✔〚!!!NOTE!!!〛: Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it..

Check Stock

60W 12000RPM Mini Milling Machine Mini Metal Lathe DIY Miniature Milling Machine Miller Multifunction Worktable Power Milling Machines 100-240V

Main parts: headstock, long/short machine bed, big/small slider, motor blade, connection block, gear etc. All of the parts are made of metal..
Maximum motor power is 144W by using more powerful motor. Make sure that you pick up the right size..
Motor case and headstock are jointed without any complex installation and assembly steps..
With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
Milling cutter with two cutting edges, is dangerous, so people should be guided by experts when using it..

Check Stock

Mobil 100545 Vactra No.4 Way Oil 1 gal

Excellent Metal Wetting & Adhesiveness - Prevents separation of lubricant from machining surfaces.
Improved Frictional Properties - Eliminates stick slip and enables accurate machining.
Improves Chatter and Scoring - Enables consistant machining operations.
Compatible with Multiple Materials - Suitable for wide range of materials.
Superior Rust and Corrosion Protection - Enables reduction of sliding surface deterioration.

Check Stock

ARKMODEL German U-Boat Type VIIC Submarine 1:48 Scale Models Plastic Hobby Kit

... VIIC Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull and all components are the ABS plastic injection forming. Part of the detail components and power components can provide metal material, CNC precision machining and become upgrade kit..
Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction. VIIC Kit included: This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components..
Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pumps, steering gear, electronic governor, electronic switch, remote control equipment, batteries, etc., are installed in the WTC(water tight Cylinder),WTC need to buy separate. Coating ,RC and glue are not included.

Check Stock

Anovo Two Point Traditional Sling Attachments Mounts Fit for Ruger 10/22, 1 Inch

【Excellent Compatibility】: Perfect sling mounting kit for the Ruger 10/22 that It comes with everything you need to install a sling on your Ruger 10/22.1 swivel screws set compatible with both wood & synthetic Stocks..
【Perfect Construction Design】：The close machining tolerances provide flawless fit and silent operation. Knurled knob-easy to grip in all weather conditions..
【All-Metal Material】: All parts are made from high-strength steel. No plastic parts and black finish ensure maximum durability under heavy use and no fade..
【Easy to Install】:Simply turn the knob clockwise to securely close and lock the pin.Turning counterclockwise and pushing out on the knob releases the locking latch to pivot for attachment and removal..
【What You Get】: Set of 2 loop with 2 pieces( 1/2 inch and 3/4 inch) studs set and 1 piece synthetic stocks every purchase..

Check Stock

TOP YO MOJO YoYo - High Precision CNC Machined Plastic with Fingerspin Yo-Yo (Translucent Purple)

TopYo used high precision CNC machining to create the mold for their latest injection molded plastic and fitted the metal hardware directly in the plastic yo-yo body.
The Mojo has a nice wide profile and thick rims that gives it a really powerful spin through combos.
The cup features a machined dimple that centers and locks in your finger for smooth and consistent fingerspins!.

Check Stock