Top Mb Carsoft7 4 Multiplexer New Reviews

6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • Use the CD74HC4067 16-channel analog signal switch.
  • Analog signal input: C0-C15 16 channels..
  • IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • Wide operating temperature range: -55C to 125C.
Check Stock

Analog/Digital MUX Breakout for Arduino

  • 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • ON Resistance 70Ohms @ 4.5Vcc and 60Ohms @ 6VCC.
Check Stock

100PCS CD4053 CD4053B CD4053BE DIP-16 Analog Multiplexer IC

  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
Check Stock

Analog Multiplexer Single 8:1 ñ9 Volt 20 Volt 16-Pin Plastic DIP Tube

  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
Check Stock

Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino

  • The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
  • TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
  • The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
  • In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
  • The chip is compatible with 3V and 5V and can be used with any logic level.
Check Stock

InstallerCCTV Video Quad Color 4CH Multiplexer 2 BNC Output with Remote Control and Free 1Amp Power Adapter…

  • Full quad display at real-tme refresh rate.
  • Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
  • Free 1A Power Adapter and remote control Included.
Check Stock

OEM Nexperia 74HC4067PW,112, Analog Switch/Analog Multiplexer Single 16:1 24-Pin TSSOP Bulk (100 Items)

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

Bridgold 20pcs SN74HC14N 74HC14 SN74 Hex Schmitt-Trigger Inverters 2V to 6V,DIP-14.

  • The most popular 74LSx series IC chip kit..
  • There are 2 models for each model, a total of 20, placed in a convenient box..
  • A new product that is capable of meeting the data requirements at work..
  • 74LS00 2 input four NAND gate, 74LS02 2 input quad NAND gate, 74LS04 six inverter..
  • 74LS138 3-8 line translator / multiplexer..
Check Stock

LxTek Compatible Ink Cartridge Replacement for Canon 1200XL PGI-1200 PGI1200XL to use with MAXIFY MB2720 MB2120 MB2320 MB2020 Printer (4 Pack-High Yield)

  • All LxTek ink cartridge replacements for 1200XL are strictly tested with industry quality control processes to perform superb results. All products are manufactured in an ISO9001 & ISO14001 certified facility.
  • Intelligent IC Chip: New compatible ink cartridges are conveniently equipped with a Latest Upgraded Chip to ensure full working compatibility with your printer.
  • Page Yield: Up to 1,200 pages per black cartridge and 900 pages per color cartridge at 5% coverage.
  • Package Contents: 4 Pack (1 Black|1 Cyan|1 Magenta|1 Yellow) compatible for Canon 1200XL ink cartridges.
  • 100% Compatible Printers: Canon MAXIFY MB2020, MB2030, MB2320, MB2050, MB2350, MB2120, MB2720 Printer.
Check Stock

Analog Demultiplexer, CD74HC4067 High Speed Analog Multiplexer Two-Way Connection Analog Multiplexer High Speed for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
Check Stock

Flamin Hot [Explicit]

  • (⚠️Come with Small Barrel and male ear phone plug end Smart pigtail for different versions for greater compatibility. NOT USB end. NOT 2-Prong....
  • UpBright New Global 5V AC / DC Adapter Compatible with Remington MB-30 MB-35 MB-40 MB-42 MB-45 MB-200 MB-300 MB975 MB-4030 PA-3215E PA3215E PA-3215N....
  • Compatible with: Remington MB-30 MB-35 MB-42 MB 40 MB 45 MB 50 MB 60 MB-200 MB 300 MB30 MB35 MB42 MB40 MB45 MB50 MB60 MB200 MB300 Type A Precision....
  • Compatible with: Remington AD-3212 RE-RP00122 UD-0311 Hair Trimmer 3.2V 1200mA 3.2 VDC 1.2A Class 2 Transformer MB-900 HC-920 HC-930 PG-370 PG-375....
  • Compatible with: Remington PA-03.610-DVA PA-03610-DVA PG-200 PG-225 PG-250 WPG-250 PG-350 PG-360 PG-520 PG-6020 PA-03.610DVA PA-03610DVA PG200 PG250....
Check Stock

10 PCS Analog Multiplexer,Breakout Board Module,CD74HC4067 High Speed CMOS 16-Channel Analog Digital Multiplexer Demultiplexer,Suitable for Digital and Analog Signals

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Check Stock

AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino

  • The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
  • Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
  • 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.
Check Stock