Top Masonry Block Reinforcement Reviews

CONFAST 3/8 x 6 Flat Sleeve Anchor Zinc Plated 25 per Box

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block.
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials.
  • PRE-ASSEMBLED - Ready to install no separate parts required.
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs.
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor

  • MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • Coverage: 300 - 400 square feet per gallon..
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

1/4 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 1/4 x 1-3/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 1/4 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

3/16 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 3/16 x 1-1/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 3/16 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

INSL-X SXA11009A-04 Stix Acrylic Waterborne Bonding Primer, 1 Quart, White

  • Premium-quality, acrylic-urethane bonding primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Bonding primer for drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product..
  • Fully cures in temperatures as low as 35 °F..
  • 75 - 100 square foot coverage for interior or exterior use.
  • Low VOC and easy soap and water cleanup..
  • Excellent enamel holdout, providing a great base for an even topcoat finish..
  • Before painting, review the INSL-X STIX label for proper preparation and application tips..
Check Stock