Top Marker Light Wiring Harness Reviews

APDTY 156208 Side Marker Light Lamp Wire Wiring Harness Pigtail

Brand New Side Marker Light Lamp Wire Wiring Harness Pigtail.
Fits Front Left or Front Right Side Marker Lamp.
See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model.
Replaces 68274527AA, 56055463AA, 56055463AB.

Check Stock

Partsam 10x 3/4

These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet.
Package includes 10Pcs 3/4″ Amber Led Marker Lights 3 Wires in Clear Lens, 3 diodes per light, Fix 3/4″ Hole.
Warranty: We truly offer 1 year warranty! If have any questions or issues about our 3/4 led marker lights, Please feel free to us and we will reply in 24 hours.
Sealed Light, 3 Wires Setup, High Low Function.
3/4″ amber led marker lights 3 wres in clear lens: 3/4″ round LED lamp for use as a combination turn signal and running lamp, can be installed anywhere you’d like to mount them by drilling a 3/4″ hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
Wiring Tips: hardwired with three wires, white is ground, red is high brightness for turn signal lights and black is low brightness for marker lights or running lights.

Check Stock

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..

Check Stock

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

FULL SERVICE TRAILER LIGHTS KIT: This utility led trailer light kit has everything you need: 1X Rectangle LED combination stop turn tail light(37 Diodes),1X Rectangle LED combination stop turn tail light with license illuminator(48 Diodes), 2X amber LED marker lights ,25-ft wiring harness(21.65ft wiring harness and 3.93ft wiring harness),license plate bracket and mounting hardware..

Check Stock

LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch

Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker..
IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term..
Widely Used : Widely applicable to 80 Inch wi....

Check Stock

For Dodge Ram 1500 2500 3500 Fog Lights Jumper Wiring Harness, 56045501AC, Fog Lamp Jumper Wiring

Fitment - Specially for 2002-2008 Dodge Ram 1500 Truck Fog Light Wiring Harness, for 2003-2009 Dodge Ram 2500 Truck Fog Lamp Jumper Wiring Harness, for 2003-2009 Dodge Ram 3500 Truck Fog Light Wiring Harness.
Manufacturer Part Number - 56045501AC. Fits LH (Driver Side) & RH (Passenger Side).
Installation - Perfect Fit. No tools required. No cutting..
Material - The fog lamp light jumper wiring harness made of high grade materials to ensure peak conductivity and perfect connections, which will built to long lasting durability, performance and prevent water and corrosion.
Service - We offer 56045501AC fog lamp wiring harness 2 years shelf life, any questions in the fog lamp wiring harness, please share with us first, we will reply you within 24 hours.

Check Stock

Omix | 12401.19 | Side Marker Light Socket | OE Reference: 5455853K | Fits 1976-2006 Jeep CJ/Wrangler YJ

Replacement side marker light socket assembly and bulb from Omix-ADA..
Includes light socket and wiring harness.

Check Stock

Partsam 3X Smoke Cab Light Amber 12LED Cab Marker Top Roof Running Light Assembly + Wire Harness Compatible with Silverado/ Sierra 1500 2500 2500HD 3500 3500HD 2014 2500HD 3500HD 2007-2013

FITS 2007-2013 Silverado 1500/ 2500/ 2500 HD/ 3500/ 3500 HD and 2014 Silverado 2500 HD/ 3500 HD,FITS 2007-2013 Sierra 1500/ 2500 HD/ 3500 HD and 2014 Sierra 2500 HD/ 3500 HD.
NOTE: WILL NOT FIT: 2007 Silverado/ Sierra Classic trucks.This cab light set can be installed on a 14-16 / truck that DID NOT come with factory installed cab lights.
Used as cab marker light, Roof Cab Marker, Clearance Light, Roof Running Light, Cab marker, Roof lights.
Easy to install: just remove your factory cab marker lights and bolt these in their place. Red wire is positive, Black wire is negative.Hard Wire Needed，Not Plug and Play!.
Wiring Pack, Gasket included, all you need for replacing the stock harness or other modifying & rewiring.and remember to tighten the screws..

Check Stock

7 Pin Plug Rechargeable Car Towing Lights LED Trailer Light Kit Wireless Tow Lights

... board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection.
All-in-one Kit: Comes with everything for your straightforward installation of the light, include lights, license plate bracket, 25ft length trailer wiring harness and the different types of stainless steel mounting hardware.
Easy Installation: For light mounting: Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Picture 5 for instruction. For wiring connection: Just color to color, white to the ground (vehicle frame). For hardware you might need to use, please see Pic 8 for instruction.

Check Stock

PSEQT Smoked Len Dually Bed Fender Side Marker LED Lights for F250 F350 F450 F550 (Smoked Lens with 2 Red Lights, and 2 Amber Lights))

✅【Easy to install】Comes with the T10 Plugs, play and plug, no modification needed. Remove old lights and insert the plug directly into the bulb socket. NOTE: If Fender Marking Lights don't fit your stock sockets, please cut off the connector for wiring (Black is Positive, White is Negative)..
✅【High Brightness】Pack of 4 (2Pcs Smoked Amber and 2Pcs Smoked Red ) -Suitable for 1999-2014 Super Duty Trucks Side Marker Fender Marker Dually Bed. Powered by 3 super bright built-in flux LED lights..
✅【Compatibility】Fit for F350 F450 F550 Super Duty Truck 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010. Please reconfirm from the description whether it fit for your cars..
✅【High Quality】The Lens of this fender side marker lights is made of PC material (anti-scratch, IP67 waterproof), no faded with long-time exposure, ensuring long-term use..
✅【Tips of Side Marker Fender Indicator Lights】If they do not light, reverse bulb plug to obtain correct polarity (Just flip plug 180 degrees). The LED plugs into the existing bulb socket instead of the plug in the wiring harness..

Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....

Check Stock

Partsam 3PCS Amber Cab Marker Roof Running Light Cover + Base w/Wire Harness Compatible with Silverado/Sierra 1500 1500HD 2500 2500HD 3500 2002 2003 2004 2005 2006 2007 Pickup Trucks

For 2002 - 2006 Silverado/ Sierra 1500 1500HD 2500 2500HD 3500 trucks with factory installed cab lights. Part number: CRL264155AM.
For 2007 Silverado/ Sierra Classic 1500 1500HD 2500 2500HD 3500 trucks with factory installed cab lights..
Covers are made of high quality ABS plastic, won't fade from exposure, with T10 socket, convenient for modifying & rewiring.
Direct replacement for OEM factory stock cab marker covers with Base Housing. Perfect fit & No leakage. Neither any cutting, modifying nor wiring is....
Kit includes: 3pcs Amber Roof Cab Marker Clearance Light lens+Base Housing,Wiring harness, on/off switch, gaskets and stainless steel screws,etc.

Check Stock

T10 W5W 194 LED Bulbs Sockets Pre-wired Connector Wiring Wire Harness for Cab Marker Lights (Pack of 5)

T10 168 194 2825 Nylon Heavy Duty 5 in 1 Wiring Harness w/ Sockets.
Compatible Bulbs: 158 161 168 175 194 2823 2825 2827 904 906 912 921 W5W, etc.
Fit Models: Universal Cab marker Light T10 Harness will fit Any Model Truck, SUV or RV.
Pre-Wired Socket For Easy Plug-N-Play Installation.
AEgle offers ONE year Warranty for quality-related issues.

Check Stock