Top Marker Light Wire Harness Reviews

Partsam 10Pcs 3/4" Round Amber Trailer Led Marker lights 3 wire Turn Signal Light Clearance Lights Grommet Mount for Trailer Truck Fender Marker Lights Sealed

  • Partsam ( 10 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Install them on the front or rear of your vehicle as side marker lights, clearance lights, auxiliary turn signals or supplemental brake lights.
  • 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder fenders or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. includes pigtail harness and mounting grommet for use on your vehicle.
  • Universal for most 12V vehicles. Perfect for Trailer, Truck, Car, Bus, Pickup, ATV, UTV, Van, Semi-trailer, Camper, RV, Boat Trailer, SUV, Caravan, Cabin Cars, Lorry, etc.
  • EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness.Outer Diameter: 26mm (1.02'').
  • Package include:10x Amber 3/4" Side Marker Light. 1 Years Warranty Guarantee, Feel free contact us for any question.
Check Stock

APDTY 156208 Side Marker Light Lamp Wire Wiring Harness Pigtail

  • Brand New Side Marker Light Lamp Wire Wiring Harness Pigtail.
  • Fits Front Left or Front Right Side Marker Lamp.
  • See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model.
  • Replaces 68274527AA, 56055463AA, 56055463AB.
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

iJDMTOY Carbon Fiber Style Amber/White Switchback Full LED Side Marker Light Kit Compatible With BMW 1 3 5 Series X1, w/BMW F10 Style, Replace OEM Sidemarker Lamps

  • ...mply connect this red wire to ACC 12V+ or tap to the original angel eye ring marker bulb's positive wire).
  • Installation Tip: 1) Remove the OEM side marker.
  • 2) Clean the surrounding area, since there are a lot of dirt, and wait until the surface is dry before installation.
  • 3) Connect the LED side markers to the stock harness, test the LED light first.
  • 4) Peel off the backing of the double-sided tape on the back of the LED side markers.
  • 5) Install it back and apply pressure again the surface for 30 seconds to let it completely stick onto the surface.
Check Stock

Ronybuy 10x Markers Wire Plug - 2 Wire Pigtail for Sealed Side Marker Tail Trailer Clearance Lights, 6" Long 2 Prong, Marker Lights Wiring Plug Fit 2" 2.5" Side Markers

  • 【Description】Pack of 10pcs of 2 prong male pigtails wire plugs, they can be used to replace the OE plug of tail/trailer/clearance/marker lights..
  • 【Specification】The plug harness connector is 2-Pin and 90°design, 6" long to connect with your lights easily. White is ground and black is positive. A #10 ring terminal of white wire is for easy grounding..
  • 【Application】Fits 2" and 2.5" side markers and clearance lights, or any clearance or side marker lights that require a 2 prong male plug, or a replacement for any other devices that require a PL-10 2-Pin plug. Fits most trucks & trailers, and more..
  • 【Easy Installation】Simply connect the 2 pins to the terminal before grounding the ring terminal to the chassis and connecting to a power source. Please note the connector plugs should work with round rubber grommets..
  • 【Warranty】2-Year Warranty, 45 days money back guarantee. The trailer light Harness wire is DOT Certified and Meets SAE requirements..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

LED Front Turn Signal Lights & Fender Side Marker Lights Assembly for 2007 - 2018 Jeep Wrangler JK JKU, NEWEST White Running Light and Amber Sequential Dynamic Flash Turn Signal, Smoke Lens

  • 【Upgraded Design】The LED side marker light & turn signal lights are design with white running light and amber sequential turn signal . Give your Jeep Wrangler an upgrade modern and dynamic LED appearance with enhanced safety & visibility at night..
  • 【High Quality 】These Turn Signal & Marker Lights are made of black light-weight durable ABS plastic housing and PC smoke lens. Waterproof, Shockproof, Dust proof..
  • 【High performance】Comes with high intensity LED chips, super bright lighting output. These LED turn signal & marker lights combo are more brightness and endurance than factory bulbs..
  • 【Installation & Application】Direct Plug & Play, No Modifications Required. NOTE: use extension wire connect LED turn signal lights & side marker light to the ACC or headlights for daytime running light. Fits 2007-2018 Jeep Wrangler JK JKU..
  • 【Package】2 x Turn Signal Lights(Left/Right) + 2 x Marker Lights + 2 x 2 extension harness and intruction. If you have any question, Please feel free to contact us..
Check Stock

LIMICAR Trailer Lights, Upgrade IP68 Halo Glow Trailer Light Kit, Brake Stop Turn Tail License Plate LED Trailer Lights with 25ft Trailer Wiring Harness Kit for Truck Marine RV Boat Camper

  • PREMIUM MATERIAL: Trailer Lights includes 2pcs Rectangular combination stop / brake / reverse / tail / turn signal halo tail lights, 2pcs amber clearance lights, 25ft 4 pin wire harness, license plate bracket and mounting mounting screw, bolt and hardware, 4pcs reflective stickers. The tail lights are made of high quality ABS housing + PC lens, shockproof and dustproof, ensures long lasting durability..
  • PRACTICAL FUNCTIONS: Both of the LED trailer lights used as stop, turn, brake, tail, rear reflector, side reflector and side marker light. Besides, the left light has a license plate illuminator function. "Halo-Glow" design gives a new look for your vehicle. Much brighter and lights faster with lower energy consumption, guarantees super visibility and durability..
  • WATERPROOF RATE: IP68. Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc. Upgraded lampshade surface without screws, the LED trailer lights are completely welded together, the LED trailer lights are completely welded together. Featured great sealed and waterproof performance..
Check Stock

Dr.Acces Golf Cart Rear View Mirror with LED Turn Signal | Golf Cart Side Mirror with LED trun Signal Fits EZ-GO Club Car Yamaha etc Most Golf Cart

  • Universal Side Mirror with LED Turn Signal including Installation instructions, 180° extra Adjustable wide panoramic.
  • Installation Step 1:Find desired mounting location and mark with a marker. Drill 2 small 1/8” holes in strut for mounting hardware. Drill 1/4” hole for wire. Or run your wires down strut, secure wires using mounting ties..
  • Installation Step 2:Using a wire snake feed wires in through strut and out the bottom..
  • Installation Step 3: Loosen hardware to mount LED mirror Bracket using supplied hardware. Reattach mirror to bracket using hardware from and tighten at desired mirror location..
  • Installation Step 4: a.Up-plug head-light. Use a multi meter to find power and ground for the blinker. This will supply power to the LED mirror. To do this engage blinker on turn signal, the pin that shows 12V flashing is your blinker 12V(+). b.Attach Red wire to the wire found on the harness that showed 12V(+) flashing in step 3 using a Splice Wire Connector and secure.Re-attach harness to Headlight and repeat steps 1-7 on opposite side..
Check Stock

Partsam Pair 3/4" Mini Marker Clearance Light Turn Signal Light Air Dam Lights Amber Light,3 Wires

  • Partsam ( 2 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Clearance Marker and Auxiliary Stop Tail Turn Light..
  • Led Side Marker Light, Fender Marker Light, Clearance Light, Indicator lights, Aux stop turn tail brake light etc..
  • Can be used as an aux lighting to your existing brake light, but not approved as a brake light..
  • Recessed mount with included grommet, INSTALLATION REQIURES A 3/4" HOLE AT DESIRED LOCATION.
  • EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness.
  • NOTE: This is a 3-WIRE assembly, meaning it can be used as both a turn signal And a marker lamp. But i am afraid that you can not use both functions simultaneously.
Check Stock

Astra Depot 20X (10 RED + 10 AMBER) 4-LED 2.5" Round Brake Running Tail Lights Turn Signal Side Marker Lamps

  • Partsam ( 2 x Amber ) 3/4" Side Marker light Grommet Mount Single Led, Clearance Marker and Auxiliary Stop Tail Turn Light..
  • Led Side Marker Light, Fender Marker Light, Clearance Light, Indicator lights, Aux stop turn tail brake light etc..
  • Can be used as an aux lighting to your existing brake light, but not approved as a brake light..
  • Recessed mount with included grommet, INSTALLATION REQIURES A 3/4" HOLE AT DESIRED LOCATION.
  • EASY TO INSTALL - 3 Wire Connections: Black is Negative, Red+Black - high brightness, White+Black - low brightness.
  • NOTE: This is a 3-WIRE assembly, meaning it can be used as both a turn signal And a marker lamp. But i am afraid that you can not use both functions simultaneously.
Check Stock

Fulton Wesbar 281595 Waterproof LED Wrap-Around Tail Light, Over 80' Wide Trailer, Left/Roadside, Red

  • Wrap-around design eliminates the need for rear side marker/reflector.
  • Plug-in 12" harness with 2-way flat connector and ring terminal ground wire.
  • Stainless steel mounting hardware included.
Check Stock

Partsam 4 Pcs(2Amber 2Red) Square LED Trailer Clearance Side Marker Light with Reflector Stud Mount 3LED, 2-4/5" Rectangular LED Truck Trailer Light Side Reflex

  • Partsam 2 Amber & 2 Red Square Trailer Clearance and Side Marker Light with Reflex Reflector - Red.
  • Perfect replacement for trailer side marker.
  • The two-wire design includes the lead and ground wires to mount to any surface..
  • Easy to install, has mounting bolt centered on the back..
  • Side lens Light and Side marker lights are ALL LED as well ,NOT any incandescent Bulb! Super bright LED quality ,Complies with DOT standards.
  • This square light can be used as a clearance light or side marker light with side reflex. functions as both a marker and clearance light when mounted properly.
  • This red lens is reflectorized, meaning that a separate reflector is not needed.
  • Perfect replacement marker lights for Those 12V LED Waterproof Trailer Tail Light Kit for Under 80 Inch Trailer RV on Market.
Check Stock