Top Marine Jis Butterfly Valve Reviews

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

RW 0059-005/006 JIS Japanese Industrial Standard 7-Piece JIS Driver Set Includes 3 JIS Screwdrivers #1 2 3 and 4 JIS 1/4 Impact Bits #2 3 Short & Long

  • JIS (Japanese Industrial Standard) Screwdrivers & Bits.
  • Contains (7) items total: Screwdrivers (1) JIS #1 75mm shaft, (1) JIS #2 100mm shaft, (1) JIS #3 150mm shaft, Bits: (1) JIS #2 Short 25mm size, (1)....
  • Made of Chrome Vanadium steel (drivers) and S2 steel (bits).
  • Excel with vintage machines with hard to remove fasteners. These do not slip out.
Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
  • 【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
  • 【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
Check Stock

DERNORD 1.5 Inch Tri Clamp Clover Butterfly Valve with Trigger Handle Sanitary Fitting Stainless Steel 304 2 Pack 1.5 Inch Trigger Butterfly Valve

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

Uniden Atlantis 275 Handheld Two-Way VHF Marine Radio, Floating IPX8 Submersible Waterproof, Large Dual-Color Screen, 6-Watt, All USA/International/Canadian Marine Channels, NOAA Weather Alerts

  • The Atlantis 275 comes with 6 Watts of Big-Ocean Power in a compact Submersible Floating Handheld VHF Marine Radio, and even includes an Emergency Strobe Light and built-in Flashlight Feature..
  • With the Largest LCD screen in its class 25mm (h) x 40mm (w), and Paper White Backlight display for Day Time and Red Backlight display for Night Time, it’s the radio you won’t leave shore without..
  • Built to throw in your pocket or tuck away on deck, its compact size is never far away when you need to stay in touch the most..
  • It Floats, meets the toughest Waterproof standards IPX8 / JIS8, and even clears its speaker of water after being submerged. 6 Watt Transmit Power, with User selectable 6W, 2.5W, or 1W Transmit power..
  • Receives all Marine Radio Channels, including all USA, Canada, and International Marine VHF channels (includes the new 4-digit channels and Canadian “B” channels) and receives all NOAA Weather Channels and Alerts..
  • Includes Built-in Lion battery pack, AC & DC charging cables, and charging cradle. 3 Year Warranty and Full 3 year Waterproof Warranty..
Check Stock

Sunflag +1 +2 +3 JIS Screwdrivers | Made in Japan (Perfect Grip)

  • Sunflag No3370 Perfect Grip +1 +2 +3 JIS Screwdrivers. Manufactured according to JIS B4633 Standard.
  • These Japanese Cross Point screwdrivers are designed to fit JIS (Japanese Industrial Standard) screws and Phillips screws.
  • JIS screws are used in most Japanese brands - Cars, motorcycles, cameras, fishing reels, push bike gears, printers and photocopiers, and lots of other products.
  • 3 piece set includes +1 X 75mm, +2 X 100mm, +3 X 150mm soft polymer handle screwdrivers with magnetic tips.
  • Full metal tang-thru design so these can be it with a hammer to loosen stubborn or rusty screws | Made in Japan.
Check Stock

UNDGC45 - Guardian GC45 Outdoor Weatherproof Camera

  • ... safe at sea. The Atlantis 155 doesn’t sacrifice big features to keep its profile small..
  • It Floats, meets the toughest Waterproof standards IPX8 / JIS8, and even clears its speaker of water after being submerged. And with its compact size it’s never far away when you need to stay in touch the most..
  • Receives all Marine Radio Channels, including all USA, Canada, and International Marine VHF channels (includes the new 4-digit channels and Canadian “B” channels) and receives all NOAA Weather Channels and Alerts.
  • NiMH Rechargeable 4xAAA, 950mAh NiMH rechargeable batteries and DC charging cable included. 3 Watt Transmit Power with user selectable 3W or 1W Transmit power. 3 Year Warranty and Full 3 year Waterproof Warranty..
  • How can we help? Uniden Customer Support web site is designed to conveniently walk you through product setup and troubleshooting, Web site: https://uniden.com/pages/support-1 . Contact customer support at email: [email protected] or phone: 1-800-297-1023.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • .... The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of the cutout valve can be freely controlled..
  • Working Environment: Working Voltage: 12V. Electric Exhaust Cutout Working Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. Electric Exhaust Cutout is not recommended to start work in heavy rain or extremely cold weather, the valve motor is NOT WATERPROOF..
  • SPELAB warrants the Electric Exhaust Cutout Valve Kit for 12 months warranty for quick-wear part. Include (motor, remote control, control box). We value your shopping experience and strive to offer a high-quality product and service. And if you have any other problem, contacting us and we will ....
Check Stock

Cobra MR HH350 FLT Handheld Floating VHF Radio – 6 Watt, Submersible, Noise Cancelling Mic, Backlit LCD Display, NOAA Weather, Memory Scan, Grey

  • Maximum Coverage – This VHF marine radio allows operation of channels in the US, Canada, and internationally at 1, 3, or 6 watts with for short and long range communication, and access to NOAA weather channels..
  • Safety First – Scan channels to find conversations in progress and have instant access to Channel 16 for emergency situations. Use the Tri-Watch feature to monitor three channels at once (Channel 16 and two user selected channel)..
  • Sea Ready – Floating design and orange core makes retrieving your radio easy if dropped overboard, and meeting JIS7 (IPX7) standards allows your radio to be submersed for 30 minutes at one meter deep..
  • Clear Communication – Burp Feature vibrates the water out of the speaker grill and improves speaker performance, while the noise cancelling microphone blocks background noise for clearer conversations..
  • Everything You Need – This Cobra Handheld Marine Radio comes ready to use with the included drop-in battery charger, AC charger, DC charger, LiON battery pack, antenna, owner’s manual, spring loaded belt clip, and wrist strap..
Check Stock

Taylor Made Products 61149 Tuff End Inflatable Vinyl Boat Buoy, Orange, 18 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61155 Tuff End Inflatable Vinyl Boat Buoy, Orange, 27 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61152 Tuff End Inflatable Vinyl Boat Buoy, Orange, 21 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 1146 Tuff End Inflatable Vinyl Boat Buoy, White, 15 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock