Top Manual Multi port Valve Reviews

Wadoy Central Pneumatic Air Compressor Pressure Switch Control Valve Replacement for Parts 90-120 PSI 240V

  • H/D PRESSURE SWITCH AIR COMPRESSOR 145-175 4 PORT 26 AMP w/ Gauge & Pop off valve 0-200 PSI Pressure Gauge 200 PSI Pop off valve.
  • efoo AIR COMPRESSOR CONTROL VALVE LF10A-H4,Four port, 145-175 PSI 26 AMP AMP RATING: 26 AMPS SINGLE PHASE OR THREE PHASE, 110/230.
  • Air Compressor Pressure Switches · For all global air compressor applications. · LF 10A Four Port Series (LF10A-L4) · UL Listed and CSA Certified. · DPST switch · Rated 26 Amps · Temp. range: -22° to 257°F.
  • Pressure Switch, Air Compressor, Standard Action, Factory On/Off Set 145-175 PSI, Pressure Range 35 to 150 PSI, Burst Pressure 500 PSI, Port Type 4-Port 1/4 In NPT (Female), 1/4" Compression Unloader, Diaphragm Actuation Type, Manual Switch Action Auto/ Off, Single Phase, DPST Contact Type, 26 Amps, NEMA 1 Enclosure, Temp Range -22 to 257 F, Standards UL/CSA.
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
  • Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
  • This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stock

Manual Pinch Valve, 5/16\ to 3/8\ Tube OD

  • Pinched valve tube size: 5/16" to 3/8" od.
  • Description: innotek pv-3 manual pinch valve, 5/16" to 3/8" tube od.
Check Stock

XtremepowerUS 16\ Above Inground Swimming Pool Sand Filter System 7-Way Multi-Port Valve Pool Filter up to 21,000 Gallons with Stand

  • Sand Filter System - The Filter are perfectly engineered to provide optimum flow rates that promotes clean water quality.
  • Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing.
  • Heavy Duty Design - Compact housing for all-weather functionality Impeller designed with brass inserts for long life and superior performance. Each tank is individually tested to ensure quality and reliability. Above ground pool owners can enjoy the same high performance, outstanding operating efficiency, and long-term reliability as inground pool owners.
  • 7-Way Multi-Port Filter - Multi port provides for easy use and quick back-washing (Filter, Backwash, Winter, Re-Circulate, Closed, Rinse and Waste).
  • With a threaded connections, a filter base and user's manual. Includes 7-position valve, this tank holds 110lbs of media sand.
  • Overall Dimension: 16"(W) x 16"(L) x 32-1/4"(H).
Check Stock

XtremepowerUS 19' Above Inground Swimming Pool Sand Filter System 7-Way Multi-Port Valve Pool Filter up to 24,000 Gallons with Stand

  • Sand Filter System – The Filter are perfectly engineered to provide optimum flow rates that promotes clean water quality.
  • Dependable Performance – This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing.
  • Multi-Port Filter – Multi port provides for easy use and quick back-washing (Filter, Backwash, Winter, Re-Circulate, Closed, Rinse and Waste).
  • Heavy Duty Design – Compact housing for all-weather functionality Impeller designed with brass inserts for long life and superior performance. Each tank is individually tested to ensure quality and reliability. Above ground pool owners can enjoy the same high performance, outstanding operating efficiency, and long-term reliability as inground pool owners.
  • With a threaded connections, a filter base and user’s manual. Includes 6-position valve, this tank holds 175lbs of media sand.
  • Overall Dimension: 19″(W) x 19″(L) x 35-1/4″(H) *Pump not included. Pump is Required*.
Check Stock

Tolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters

  • SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

HYDROTOOLS BY SWIMLINE 19 Inch Sand Filter Combo Set With Stand & Multi Port Valve | 0.9 THP DOE Complaint Pump 4500 GPH | Up to 19000 Gallons | 175 Pound Sand Capacity

  • {EFFICIENT WATER FILTRATION} Hydrotools sand filters are designed to hold sand at the most efficient position for optimized filtration, consistent....
  • {OVERSIZED CAPACITY} This sand filter features a double reinforced 19 inch molded tank that can hold up to 175 pounds of sand, perfect for pools up to....
  • {SILENT BUT POWERFUL} This filtration unit houses a freshly designed 0.9 THP 4500 GPH pump that is compliant with new DOE regulations. The pump has....
  • {SIMPLE COMPLETE COMBO} Complete set including the Tank, Pump, Filter Base, 6-Way Multi-Port Valve, 3-Prong Plug & Power Chord, and more. Comes with....
  • {MULTI-PORT FILTRATION} Integrated Multi-Port Valve provides quick, easy to understand settings for optimal filtration performance. Settings include:....
Check Stock

Banjo V200 Polypropylene Ball Valve, Three Piece, Standard Port, 2" NPT Female

  • Polypropylene for chemical resistance and less weight than if made from metal.
  • Standard port flow for smaller valve size.
  • Inline valve for connecting two pipes going in the same direction.
  • Female NPT threads for connecting to male threaded pipe fittings.
Check Stock

Zodiac A0553645 2-Inch Side Mount Multi-Port Valve Replacement Kit for Zodiac Jandy D.E. Filter

  • Side mount multi-port valve replacement kit.
  • Fits Zodiac Jandy D.E. pool and spa filter models DEL48, DEL60.
  • Constructed of molded ABS material with durable plastic handles.
  • Includes pre-plumbed union for waste, pump and return ports.
  • measures 2-inch side mount and 8-inch center to center.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock