Top Manual Insert Tool Reviews

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Check Stock

Mophorn 7843B Manual A/C Hose Crimper Kit,Handheld Air Hose Crimper Tool Kit with 4 Dies Whole Set #6#8#10#12,A/C Hose Crimper Repair Tool Kit Die Set,for Crimping Automotive Air Conditioning Pipes

5/16"-5/8" Crimping Tool: Made of premium iron material with special treatment for high hardness and strength, making the crimping effect better. The....
Hassle-free Operation: The toolset is a comprehensive manual crimping tool. Though it has a light structure, it can give a large output force. The....
Instant Setup: Our manual crimper can be installed according to the following steps: First, select a appropriate die to insert, then tighten the screw....
Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....

Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
*** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.

Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.

Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Check Stock

Accusize Industrial Tools 5/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2005

Model of each holder & the original insert: MGEHR10-3B (insert: MGMN300).
SCLCR10-3B & SCLCL10-3B (insert: CCMT32.5).
SDNCN10-3B & SDJCR10-3B (insert: DCMT32.5).
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
*** Insert kit Item#: 2387-2005INSERTS (Sold Separately on Amazon)***.

Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..

Check Stock

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..

Check Stock

PC Diagnostic 2-Digit Card,Module Board Test & Measuring Module PC Computer Mother Board Debug Post Card Analyzer PCI Motherboard Tester Diagnostics Display for Desktop PC

PC Diagnostic 2-Digit Card.A nice quick handy helper tool kit for getting started in troubleshooting desktop PC, Laptop and Server computers..
The motherboard diagnostic card is also called a POST card (Power On Self Test) or a PC analyzer. It is a code that displays the motherboard BIOS self-test procedure. When combined with the meaning of the POST code in the manual, you can quickly know where the computer is malfunctioning..
Insert the diagnostic card into the PCI or ISA slot of the computer motherboard. According to the digital code displayed on the diagnostic card after turning on the power, you can check the meaning of the code in the "Instruction Manual" delivered, and you can know what part of the hardware is faulty..
Intercept and hex the code of your booting computer.Hexadecimal character display.4 LED indicator.Detailed & precise LED function table and code Indication table, convenient for you consulting.

Check Stock

YG-1 S01203 HSS M4 Spade Drill Insert, TiN Finish, 3/16\ Thickness, 1\ Insert

General purpose insert for most material.
Not recommended for tool steels and high temp alloys.
High toughness for loose or manual machines.
Country of origin: Republic of Korea (South Korea).

Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..

Check Stock

Watch Link Removal Tool Kit, Watch Band Tool Kit, Spring Bar Tool Set for Watch Repair and Watch Band Replacement with Small Hammer, Professional Watch Strap Remover Repair Tool, 108PCS Spring Bar

... comes with a spring bar tool and 3 extra spring bar tool tips for removing the strap. And a watch link remover,6 extra links remove spring pins,a small hammer, a watch band holder, 4 punches pins for watch band adjustment. This kit also equipped with 108 spring bars, 20 watch links, cleaning cloth, and instruction manual. A comprehensive set of tools satisfied the daily maintenance needs of the watch..
⌚【Multi-way Adjustment of the Link】 Watchband tool kit contains two different watchband removers and 6 sizes(20pcs) watch links. Watch link remover can be used in up to 1.18in wide watch band replace and can be removed 0.19in thickness of the strap, effectively remove watch link and adjust strap length. Use the watch band holder with the small hammer and punch pins can remove the watch link and insert it..
⌚【Ideal for watch strap replacement】 The stainless spring bar tool with spring bar tool tips helps you easily remove the strap between the case and the watch, equipped with 18 sizes of spring bar (0.32in~0.99in), 6 for each size) and 3 pcs extra spring bar tool tips. Suitable for the replacement of 0.32in~0.99in wide watchband, the stainless spring bar tool is the ideal tool for strap replacement..
⌚【 High-quality material】 Watch link....

Check Stock