Top Manual Damper Reviews

LG Electronics 4900W1A001B Microwave Oven Vent Dam

  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

TENGWUMA Tailgate Damper Kit Fits For F150 2015 2016 2017 2018 2019 FL3Z-99406A10-A FL3Z99406A10A

  • Compatibility:This Tailgate Assist Damper Fits For F150 2015 2016 2017 2018 2019 OE:FL3Z-99406A10-A FL3Z99406A10A..
  • Security and protection:TENGWUMA Tailgate Assist Shock Protect Your Families From Tailgate Slamming Down,and The Tailgate Damper Kit Falls Safely and Slowly Without any Slamming Sounds Anymore..
  • Material:Tailgate damper is made of high-quality steel material.This assist shock kit tested and durable, corrosion-resistant and rattle-free..
  • Install:Tailgate Damper can be replaced directly with original parts in your vehicle and installed easily without using complicated tools,Just need to remove your original Tailgate Damper Kit and easy to Tailgate Assist Damper install..
  • Ensure Fit - To make sure this tailgate damper kit fits your exact vehicle,input your make,model and trim level into the amazon garage..
Check Stock

YARDMARIS Winch Cable Damper,Winch Damper Safty Recovery Dampener with Reflective Strips for Off-Road Safty Blanket

  • Great Tool for a Stuck Vehicle–If your SUV got stuck in a heavy snow,muddy road or rugged mountain road,you can rely on this winch damper to get out of sticky stituation..
  • Reduce Risk of Injury–Should recovery strap breaks,it will snap back and strong energy will hurt you.Winch cable damper is recommended as it can reduce damage by weighing down the broken strap and absorbing the strong energy..
  • Heavy Duty Fabric Helps Winch Line Damper Weigh 2.2 Pounds–It is a dependable winch rope damper because right side of fabric is dacron that helps the bag not bend easily.
  • the wrong side of fabric is PVC that acts as a shock absorber.Together, fabric is firmer and heavier than other ones,which makes total weight of winch damper meet needs of 4×4 racing competition..
  • Reflective Strip for Enhanced Visibility–14×1.5 inch reflective strips front and back make winch damper bag more obvious to other drivers to avoid accidents..
  • Pocket For Storage & Weight Gain–A large pocket is designed to store accessories for emergency or put anything in the winch rope damper that can gain weight to increase safety..
Check Stock

SkyTech AF-LMF/R Remote Controlled Fireplace Gas Valve Control Kit

  • Millivolt safety pilot kit with remote for use with 18 to 30 inch gas logs.
  • Manual On/Off gas valve kit with On/Off remote control.
  • 225 degree rated valve with exclusive safety seal within the gas valve.
  • Includes quick mount pilot assembly, damper clamp, valve, solenoid, flex line, and remote.
  • For use with Natural Gas (LP conversion kits available).
  • Valve kit measures 3 3/4″ W x 4″ D 2 3/4″ H.
Check Stock

Lucky Seven FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,FL3Z99406A10A for 2015-2019 Ford F-150

  • FL3Z-99406A10-A fit for Ford Tailgate Shock Assembly,REPLACeS PART# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • FL3Z-99406A10-A/,fl3z-99406a10-a tailgate shock assembly,This tailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering.2015 2016 2017 2018 2019 Ford F150. The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body..
  • Fl3z-99406a10-a oem for 2015 - 2019 Ford F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the Ford F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights,REPLACEMENT TAILGATE DAMPE....
Check Stock

Suncourt ZoneMaster Fully Adjustable Motorized Airflow Control Zone Damper, UL Listed 24VAC/20VA Plug-in Transformer Included, Compatible with Any 24 Volt Thermostat, Normally Open – 6', Silver

  • ECONOMIC SOLUTION –Protect your comfort & your wallet by limiting heating and cooling expenses in your space. This cost-efficient zone damper limits the need for excessive HVAC use and keeps your heating and air conditioning costs low over time. With a 3-year manufacturer’s warranty, this zone damper is built tokeep you comfortable year after year..
  • TOTAL ZONE CONTROL –This ZoneMaster gives you complete individual control over the climate in your space. Customize and maintain the temperature in specific rooms of your home with these zone dampers. Easily integrate it with an existing zone controller system!.
  • FRESH AIR INTAKE – Improve the quality of air in your home by installing a fresh air intake system with a Suncourt motorized airflow damper. Once damper is closed, it will block drafts, airflow and odors from flowing through. Suncourt’s dampers boast a patent-pending coupler with 0°- 90°adjustment capabilities, making them perfect for fresh air intake applications..
  • ENERGY EFFICIENT DESIGN – Take control of your comfort and preserve energy by using these automated duct dampers. When power is not supplied, the damper stays open allowing for air to flow through..
  • UL LISTED 24 VAC TRANSFORMER INCLUDED - Simple and user-friendly, this damper....
Check Stock

Tailgate Damper Kit - Compatible with Ford F-150 2015, 2016, 2017, 2018, 2019, F-150 Raptor 2017-2019 - Replaces FL3Z-99406A10-A, FL3Z99406A10A - Tail gate Assist Shock Strut - Lift Support Kit

  • Replacement Tailgate Damper Kit - This is a replacement for the tailgate damper accessory kit. The tail gate even being made of aluminum is really heavy especially when installed with more accessories like the tailgate step resulting to the tailgate dropping right out of the hands when opening. This kit safely lowers the tailgate in a slow and controlled manner..
  • Compatible Replacement for Ford F150 - 2015 - 2019 F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights..
  • Replaces Part# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory tailgate damper kit. Ensure that the tailgate harness under the t....
Check Stock

Ancona An-1262 Slim Plus 30\ 325 CFM Non-Vented Under Cabinet Range Hood in Black

  • protective stainless steel inner easy-clean panel.
  • 2 x 2. 55-watt LED lights – Designed by Ancona, powerful, bright and , known to last up to 10 times longer than conventional lights.
  • top and rear 10-inch by 3. 25-inch rectangular ventilation, damper included.
Check Stock

Duct Outlet 6\ Damper Sleeve w/ 1.5\ Stand-Off, 3/8\ Rod HVAC

  • 6" Damper Sleeve w/ 1.5" Stand-Off, 3/8" Rod HVAC.
  • 1½” Stand-Off for the locking Damper Handle.
  • 20 Gauge Galvanized Damper Blade with 3/8" Rod.
  • Crimped on one end to fit inside next ducting section.
Check Stock

Assault Racing Products 8000170 7.5\ LT-1 Chevy Harmonic Damper LT1

  • Self-adhesive strip adheres to the Crank Vibration Damper.
  • Spark advance up to 60 Degree instead of only 10 Degree-15 Degree as on chain case timing tab.
  • Genuine Mopar Performance P4529070AB Damper Degree Timing Tape.
Check Stock

Tamiya 86012 Paint Spray, Silver

Check Stock

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

  • ...ailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
  • ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
  • ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • ★ 100% Satisfactory service, if you have any questions, please feel free....
Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

  • 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
  • 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
  • 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
  • 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
  • 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....
Check Stock