Top Manifold Stud Kit Reviews

ARB 4x4 Accessories 170112 Differential Axle Breather Kit for drivetrain differentials transmissions and transfer cases

  • The axle breather manifold is machined from billet aluminium and anodized, making it lightweight and resistant to the elements..
  • The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in....
  • The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge..
  • 8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant.8mm tubing has been selected over the standard 6mm tubing to....
  • The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 inch) bolt or stud, which....
Check Stock

Subaru Exhaust Manifold Stud & Nut Kit WRX STI Legacy Impreza Forester Crosstrek Outback Brz 800910550 902370029 Genuine Oem

  • Stud 800910550 X6 (10x41) Nut 902370029 x6.
  • 1990-2018 Legacy and Outback 1993-2018 IMPREZA 1998-2018 Forester.
  • 2002-2018 WRX 2004-2018 STI 2013-2019 CROSSTREK 2003-2006 Baja.
  • 2013-2019 brz 2006-2013 Tribeca 1992-1997 svx.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

ARP 134-2002 1342002 Intake Blt Kit Chevy Vort

  • Package Dimensions: 2.032 H x 6.858 L x 9.144 W (centimetres).
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator Airline Tire Inflation Kit & Air Locker Manifold Kit

  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold....
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals.....
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT....
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing....
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

Partman Fit for 190627GS 16031 Excell EXWGV

  • Pressure Washer Manifold Kit 16031 190627GS 190574GS.
  • Kit Includes: Chemical Injector, Inlet Check Valve, 4 Mounting Bolts, and 4 Mounting O-Rings.
  • To fit model number 020228 -- Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold..
  • Excell Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like, you can remove the short one and install the longer one that is on the manifold.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor\A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor

  • Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor "A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor.
  • This A-Team Performance air conditioning manifold fitting kit will allow you to complete the installation of your vehicle's A/C system.
  • Allow you to complete the installation of your vehicle's A/C system..
Check Stock

kipa Pressure Washer Manifold Kit for Briggs Stratton 020228 Pressure Washer EXWGV1721, Replace Part 16031 190627GS 190574GS Injector Inlet Valve Mounting Bolt

  • New Pressure Washer Manifold Kit For Briggs Stratton 020228 Pressure washer EXWGV1721, Replace part 16031 190627GS 190574GS injector inlet valve Mounting Bolt.
  • Top Quality CNC-Machined KIPA Pressure Washer Manifold Kit, easy to install. Directly Fit.
  • Fits for Briggs model number 020228. Please do match the part Number and the structure before purchasing, Thanks.
  • Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like. You can remove the short one and install the longer one that is on the OEM manifold.
  • Please note: Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold.
Check Stock

2 Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds

  • 2" Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds.
  • This Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's....
  • This kit is used to Connect a New 2" Manifold to old 2" Flex or Hard Pipe.
  • This Kit is enough glue to install 1-2 Manifolds.
  • To see our You Tube Video about this kit search for "Spin It to Win It Coupler Kit Plumbing Hot Tubs How To The Spa Guy".
Check Stock