Top Makita Drill Brushless Reviews

Makita XGD01PT 36V (18V X2) LXT® Brushless Earth Auger Kit (5.0Ah)

  • No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levels.
  • Makita-built BL Brushless Motor delivers power of a 36cc gas earth auger.
  • Drill holes up to 8" wide and 41" deep (extension bar, auger bit and blades sold separately).
  • High performance digging with even and consistent holes for landscaping, construction and soil sampling.
  • Ideal for post-hole digging, fence installation, large planting jobs and construction projects.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Makita CX203SYB 18V LXT® Lithium-Ion Sub-Compact Brushless Cordless 2-Pc. Combo Kit (1.5Ah)

  • Driver-Drill weighs only 2.9 lbs. with battery for reduced operator fatigue.
  • Compact and ergonomic design at only 5-7/8" long.
  • Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and fastening applications.
  • Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque.
  • Engineered with a metal jampot design for increased durability.
Check Stock

Makita CX203SYB 18V LXT® Lithium-Ion Sub-Compact Brushless Cordless 2-Pc. Combo Kit (1.5Ah)

  • Driver-Drill weighs only 2.9 lbs. with battery for reduced operator fatigue.
  • Compact and ergonomic design at only 5-7/8" long.
  • Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and fastening applications.
  • Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque.
  • Engineered with a metal jampot design for increased durability.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

DEWALT DCK397HM2 Lithium Ion 3-Tool Combo Kit

  • Variable 2-speed 1/2" Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. with battery.
  • 6-1/2" Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery.
  • Reciprocating Saw provides 0-2,800 SPM with "tool-less" blade changes and weighs only 8.3 lbs. with battery.
  • Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque and weighs only 2.8 lbs. with battery.
  • Brushless 4-1/2" Cut-Off/Angle Grinder delivers 8,500 RPM and weighs only 5.5 lbs. with battery.
Check Stock

Makita XSH03Z 18V LXT Lithium-Ion Brushless Cordless 6-1/2' Circular Saw, XRJ05Z 18V LXT Lithium-Ion Brushless Cordless Recipro Saw, & BL1840B 18V LXT Lithium-Ion 4.0Ah Battery

  • Brushless circular saw features a powerful Makita-built, electronically controlled BL Brushless Motor which delivers 5,000 RPM for faster cutting and ripping.
  • Brushless circular saw features Automatic Speed Change technology which adjusts cutting speed and torque during cut for optimum performance.
  • Reciprocating saw's Makita-built, variable 2-speed, brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute and a 1-1/4" stroke length for faster cutting.
  • Brushless reciprocating saw's "tool-less" blade change system allows for faster blade installation and removal for increased productivity.
  • BL1840B 4.0Ah battery features an integrated L.E.D. battery charge level indicator which allows users to monitor battery charge.
  • BL1840B battery provides up to 35% more run time per charge compared to BL1830 and reaches full charge in 40 minutes or less.
Check Stock

WaxPar USB Camping Fan Powered by Makita 18V LXT Lithium-ion Battery, Portable Tent Fan Rechargeable Battery Operated Fan with 180LM LED Lantern,USB Port, Remote, 1800CFM 3-Speed Outdoor Floor Fan

  • 【 3 IN 1 MULTI-FUNCTION FAN POWERED BY Makita BATTERY 】—— This Makita table fan Compatible with Makita 18V LXT Lithium-ion Battery BL1860 BL1850 BL1840 BL1830 BL1815 etc. (Battery & 2 Count AAA Alkaline NOT INCLUDED).
  • 【NOISELESS - Below 30DB benefits from the Brushless Motor Technical】——WaxPar for Makita fan with advanced brushless motor offers high velocity and strong airflow. Also makes your fan quieter and more comfortable, keeping you cool all summer..
  • 【 FAN - 3 Levels Wind Speed Jobsite Fan】——Portable fan for Makita with 2.2-4m/s wind speed, 1750-3050 RPM rotating speed. Fan operation- Press button 1S to switch wind speed. AS a work fan,outdoor rechargeable Camping Fan, jobsite fan,shop fan, garage fan, greenhouse fan.
  • 【 LIGHT - 3 Levels Super Bright LED Camping Lantern 】—— LED light operation- Press button 3S to switch brightness, From 60LM , 120LM to 180LM, 6000-6500k, 9w. A perfect partner for your tent, camping , hiking, motor homes or power outage emergency occasion.
  • 【 BATTERY LIFE WITH CAMPING FAN 】---- In the case of the fan and L....
Check Stock

Makita XAD03Z 18V X2 LXT® Lithium-Ion (36V) Brushless Cordless 1/2' Right Angle Drill, Tool Only

  • x2 LXT technology delivers more power, speed and run time without the hassles of a cord (batteries not included).
  • Drills up to 6-1/4" holes with hole saws and 4-5/8" holes with self feed bits.
  • Drills up to 160 2-9/16" holes per charge in 2x spf using two 5.0Ah batteries and self feed bit (batteries and bit not included).
  • Makita BL Brushless motor combined with x2 LXT technology delivers no-load drilling speeds of 0-350 RPM and 0-1, 400 RPM for maximum efficiency.
  • Automatic speed change technology adjusts drill speed and torque during drilling for optimum performance.
Check Stock

Makita XAD03PT 18V X2 LXT® Lithium-Ion (36V) Brushless Cordless 1/2\ Right Angle Drill Kit (5.0Ah)

  • x2 LXT technology delivers more power, speed and run time without the hassles of a cord.
  • Drills up to 6-1/4" holes with hole saws and 4-5/8" holes with self feed bits.
  • Drills up to 160 2-9/16" holes per charge in 2x spf using two 5.0Ah batteries and self feed bit (self feed bit sold separately).
  • Makita BL Brushless motor combined with x2 LXT technology delivers no-load drilling speeds of 0-350 RPM and 0-1, 400 RPM for maximum efficiency.
  • Automatic speed change technology adjusts drill speed and torque during drilling for optimum performance.
Check Stock

SEYVUM C11 Cordless Drill Set, [Compact] [Powerful Brushless Motor], 12V Electric Drill 350 In-lb Torque, Power Drill with Tool Bag, 1H Fast Charger, Lightweight, Electric Screwdriver Drill Bits(Blue)

  • POWERFUL BRUSHLESS MOTOR & LONG LIFE - Cordless drill with brushless motor, high power ceiling, and long service life. The maximum speed of the drill is 1500rpm, and the maximum torque is 350in-Lbs. Also, the brushless motor runs cooler and more efficiently for longer life. Brushless drill delivers up to 35% more runtime over brushed.
  • 350 IN-LBS & METICULOUS AND THOROUGH - An 20+1 position clutch prevents the stripping of screws and delivers 350 in-Lbs (40N.M) of max torque. Power drill's multi-position clutch will deliver precise power where you need it. When faced with a change of density in materials. Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • 2 VARIABLE SPEED ADJUSTMENT - The electric drill is designed with variable 2-speed settings (0-450 rpm and 0-1500 rpm) for multiple purposes. The drill trigger controls the speed. Being able to vary the speed makes it easier to start holes, drive screws, and drill wood, metal, plastic. The reversibility option can help reverse drills out of holes and remove screws.
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

Makita XT507PT 18V LXT® Lithium-Ion Brushless Cordless 5-Pc. Combo Kit (5.0Ah)

  • Variable 2-speed Hammer Driver-Drill with Makita built BL Brushless Motor delivers (0-550 & 0-2,100 RPM) and 1,250 in.lbs. of Max Torque.
  • Impact Driver features 4-speed power selection (0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,600 / 0-3,800 IPM) provides 1,600 in.lbs. of Max Torque.
  • 7-1/4" Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°.
  • Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4" stroke length for faster cutting.
  • High-luminance 4 L.E.D. flashlight provides 160 lumens.
Check Stock