Top Makita Btd140 Reviews

Battery Adapter for Makita 18V Battery, ADP05 Power Source Charger with LED Work Light & 1 PD USB-C & 1 USB Ports, Powered by Makita Lithium-ion Battery (Tool ONLY)

  • 【Compatibility】 With all Makita 14.4V ~ 18V LXT BL1415, BL1430, BL1445, BL1815, BL1830, BL1845 batteries (battery NOT included)..
  • 【USB ports and DC】 With 1 PD USB-C and 1 USB Ports and 1 DC 12V 2A port, it can quickly charge two electronic devices at the same time, e.g. B. mobile phone, tablet. With a belt clip, you can use the Makita battery to charge your phone while walking..
  • 【LED work light】 Equipped with 140 lm LED flash lighting system, there are two modes: continuous mode and flash mode, two brightnesses, suitable for camping, working in the dark and many other occasions..
  • 【Safe to Use】 With its own short circuit, undervoltage and overcurrent protection, the battery adapter is safe to use, durable and can withstand abuse in the workplace..
  • 【Warranty and Service】 We offer a 12 month warranty. If you have any questions about the product, please contact us first..
Check Stock

Makita XAU02ZB 36V (18V X2) LXT® Brushless 10\ Telescoping Pole Saw, 13' Length, Tool Only

  • Telescoping shaft easily adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches.
  • Makita-built BL Brushless Motor delivers power of a 30cc gas pole saw.
  • Up to 140 cuts in 4x4 cedar with two 18V LXT 5.0Ah batteries (batteries not included).
  • 20% faster cutting speed than a 31.4cc gas engine pole saw.
  • Torque boost mode powers through thick or hard branches.
Check Stock

Creabest 14.4V 3.5Ah Ni-MH Replacement Battery Compatible with makita 1434 1420 1422 1433 1435 1435F 192699-A 193158-3 192600-1 1051D 4033D Power Cordless Drill Tools

  • Brand New, High quality Ni-MH Cells, 14.4 Volts, 3500mAh, 100% compatible with originals charger DC1804, DC7100..
  • Compatible with Makita 14.4V battery, Makita PA14, 1420, 1422, 1433, 1434, 1435, 1435F, 192600-1, 193985-8, 192699, 193157-5, 193158-3, 1051D, 4033D..
  • 14.4v Replacement Battery for Makita 1000 Series, Makita 4000 Series, Makita 5000 Series, Makita 6000 Series, Makita 8000 Series, Makita JR Series,....
  • Makita 14.4v battery are FCC, CE and RoHS certified, No memory effect, no pollution, and low self-discharge, can be charged or discharged as needed....
  • Guarantee: we provide 30 days full refund or replace, 24 hours warmly service..
Check Stock

Makita XAU02PTB 36V (18V X2) LXT® Brushless 10\ Telescoping Pole Saw Kit, 13' Length (5.0Ah)

  • Telescoping shaft easily adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches.
  • Makita-built BL Brushless Motor delivers power of a 30cc gas pole saw.
  • Up to 140 cuts in 4x4 cedar with two 18V LXT 5.0Ah batteries.
  • 20% faster cutting speed than a 31.4cc gas engine pole saw.
  • Torque boost mode powers through thick or hard branches.
Check Stock

Pole saw Attachment for Attachment Capable String Trimmers, Polesaws, and Powerheads fits for Hus 128LD, most brushcutters and Powerheads (Black)

  • Telescoping shaft easily adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches.
  • Makita-built BL Brushless Motor delivers power of a 30cc gas pole saw.
  • Up to 140 cuts in 4x4 cedar with two 18V LXT 5.0Ah batteries.
  • 20% faster cutting speed than a 31.4cc gas engine pole saw.
  • Torque boost mode powers through thick or hard branches.
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

Bioaid Lipid 3in1 Multiparameter Total Cholesterol,HDL,LDL and Triglicerides Meter test kit with 5pcs 3in1 Strips, Blue

  • Reflectance Photometer methodology analysis excellent accuracy best analysis method..
  • Bioaid 3in1 Multiparameter Cholesterol Triglycerides meter kit contains 1 meter, 1 code chip, 5 strips 3in1,5 safety lancets,5 Capillary transfer tubes 25μL and instructions manual..
  • NO BATTERIES INCLUDED DUE TO SHIPPING RESTRICTIONS.
  • strips Link:https://www.amazon.com/dp/B0BTD457QM.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Makita 2 Piece - 3.25\ HSS Planer Blades for 3.25\ Planers - Fast Cutting for Hard Wood

  • 2 Makita 3.25" High Speed Steel (HSS) Planer Blades For Planning Hard Wood on Makita 3.25” Planers, such as KP0800K, KP0810, XPK01Z, XPK02Z & N1900B & ALL 3.25” Planers | Ideally Suited For Squaring & Framing.
  • CUT FASTER & LONGER with Makita's Double edged blade design featuring a High Speed Steel construction that's indefinitely Resharpenable for continued use on Hard Wood.
  • Optimized for use Makita 3.25" Planers & compatible with all 3.25" Planers, these blades are Ideal for heavy construction planning applications, squaring, framing, and wood finish work..
Check Stock

Khanka Hard Battery Storage Box Holder Carrying Case Replacement for Makita 12V 18V 40V Battery and Charger - Holds 12V 18V 40V 2.0/2.5/3.0/4.0/5.0/6.0-Ah Battery Charger Case Only

  • Tool battery organizer, designed for 12v/18v/40v battery and charger case, this battery organizer is suitable for makita 12v/18v/40v (BL1021B BL1041B....
  • The hard case is suitable for different sizes of makita battery and contains 9 removable dividers for free DIY storage space inside the hard case,....
  • This hard case replacement for makita batteries 18v lithium ion is made of high quality EVA material, shockproof, dustproof and waterproof, protect....
  • The hard shell can ensure your makita battery is safe and convenient, with light weight. The classic zipper design makes it easy to open and close..
  • Note: Only case is sold, makita battery and charger are not included.
Check Stock

Power Wheels Adapter for Makita 18V battery Dock Power,Makita 18V Dock Power Adapter with 12 Gauge Wire,Good Power Convertor for DIY Ride On Fan Truck Robotics RC Toys and Work Lights

  • Fully Applicable: 100% compatible with Makita 18v, our battery power connector fits your battery perfectly, and you can easily install and lock your....
  • Good Quality: Makita 18v battery dock adapter was made of good ABS plastic. Strong,Heat resistant,impact resistance,moisture resistance..
  • Easy to install: Makita 18V battery adapter can lock your battery well. Just move the power installation connector gently to the inside of the groove,....
  • Creativity & Entertainment: Power Wheel Adapter has installed 12 gauge wire.Enjoy yourself in DIY! Good Power Convertor for DIY Ride On Fan, Truck,....
  • Warning: Work with Makita 18v Li-ion Battery Only.Please check if it fits your battery before buying.Compatible with Makita BL1830 BL1840 BL1850....
Check Stock

Makita 162258-0 Vibration-Proof Side Handle

  • Compatible with Makita Power Tool Models 9031, 9501B, 9503BH, 9505BH, 6000LR, 9558NB, 9558PB, 9557PB, 9553NB, DA3010F, 9523NBH, N9501BZ, 9227CY (NOT Included).
  • Please Reference Tool Diagram to Ensure Part Compatibility.
  • Included: (2) Makita Handle Grips (Model #153489-2)(Part Only - Tools NOT Included).
Check Stock