Cooler Master High Performance Thermal Paste - (HTK-002-U1)
- Suitable for CPU, chipsets on Mainboard, VGA card, etc.
- Zif Socket Templates ensure correct applying area with various CPU socket types.
- Produces an even layer when using applicator.
Top Mainboard Post Card Reviews
SD SDHC SDXC MMC to 3.5' 40Pin Male IDE Adapter Card SD Memory Card to IDE Hard Disk Drive Adapter
- SD to 3.5" 40Pin IDE Adapter,Convert SD, SDHC, MMC to an IDE-compatible hard drive.Support PIO, multi-word DMA and super DMA data transmission mode. high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error.Ideal for some devices that required a fast and easy bootable device such as POS..
- Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 3.5" hard disk.Provides an alternative for data storage and transfer or test for mainboard, sound card, display card and memory card, etc..
- Compatible with SD Memory Card specification 1.1, MMC specification 2.0, SDHC Memory Card. SD socket support maximum 32GB SDHC card Support PIO, Multi-Word DMA and Ultra DMA data transfer mode. Compatible with DOS, Windows 98SE, Me, 2000, XP and Vista & Linux. Bootable, install OS and application on SD card..
- Easy installation and no driver required.Mini board design and no space wasted. Ompatible with MMC system specification 2.0 , SD Memory Card specification 1.0, SDHC Memory Card..
- Attention: Some of the mother board required to enable LBA mode and disable DMA transfer mode..
HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi
- The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip..
- Easy to use, low cost, and applicable to equipment development and card reader development etc..
- Applicable for the user who need to design or manufacture the RF card terminal..
- The module can be directly loaded into the various reader molds..
- The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance..
Memory Card Reader, High Speed Adapter Card Sturdy Durable Large Capacity for Motherboard for Computer
- Cable connected with mainboard: 20PIN 3.0 cable*1, big 4 PIN cable*1, wire USB2.0 cable*1, data cable*2, audio cable*1.
- Support for Windows 2000/XP/Vista and Win7/8, for Linux/OS.
- Audio port: Front speakers and microphone. It solves the inconvenience of the plug behind your chassis. ESATA ports has high transfer speed, improving work efficiency..
- All-in-1 Card Reader, supports M2/TF/SD/MMC/MS/CF(Support up to 64G memory card). It has build-in USB 3.0 Port, USB 2.0 port, e-SATA, port, 4 pin Power port, Audio, Multi Card Reader, which can command your needs..
- USB2.0 port transfer speed up to 480Mbps. LED indicates power status and hard disk read and write status.
JGAURORA Upgraded A5S 3D Printer Pre-Assembled with Metal Frame Large Build Size Heated Bed 305x305x320mm Desktop 3D Printers Filament Sensor (A5S)
- JGAURORA A5S 3d printer is an updated version of A5, printer size: 305*305*320mm (12*12*12.6in), content 250g PLA filament.
- Updated:1.Change the connection method use SD card.
- 2.Mainboard: A5S is self-developed mainboard, high precision and good heat dissipation.
- 3.A5S adds automatic memory, intelligent warning function.
- 4.A5S using certified power, cost is three times higher than normal, add one more protection.
- Filament Run Out Detection:the machine beeps when filament runs out to remind you to change new filament quickly, if filament run out for 1 hour, will stop heating nozzle, resume after filament re-load.
- BDG Heated Platform: Allows you remove prints flexible and keep cleaner,won't need masking tape and glue stickers..
- Fast Assembly: come with three modular, the frame, Y-axis box and the filament rack, less than 30 min to complete the assembling..
WiFi Card Network Atheros AR5B22, Dual Band Wirless Mini PCI-E 802.11N WiFi WLAN Card, 300M Wireless Card Bluetooth 4.0 Bluetooth Combo 2.4 & 5Ghz
- 【Fitment】Only Use For HALF MINI PCI-E Interface, Suitable for laptops, desktops, all-in-ones, small cases, advertising players and other devices with the same interface..
- 【Supported Operating Systems】For WIN 7WIN 8WIN 10. Compatible for ASUS, for M5G Z77, for Gigabyte, for ASRock Z77 Desktop Motherboard With MINI PCI-E Specification, for DELL, for Toshiba, for ASUS and other Brand New Notebook Models Can be Used..
- 【High Transmission Rate】The wireless transmission rate of the Wifi WLAN card can reach up to 300Mbps. The wireless card has dual band, 2.4Ghz and 5Ghz..
- 【Mini Card】This wireless card is a half mini PCI-E card, fit for laptops with mini PCI-E mainboard..
- 【Practical Function】This WIFI card provides an excellent solution for your daily online activities such as transferring files, browsing the Internet, and downloading music.
PC Diagnostic 4-Digit Card,Module Board Test & Measuring Module PC Computer Mother Board Debug Post Card Analyzer PCI Motherboard Tester Diagnostics Display for Desktop PC
- PCI and ISA 4 digit PCI analyzer:standard PCI and ISA interface,easy access to desktop PC.Standard PCI and ISA interfaces for easy access to desktop PCS.4 digit display,the first 2 digits indicate the current error code,and the last 2 digits indicate the previous error code..
- PC Diagnostic 4-Digit Card fully compatible with any kind motherboards which has the PCI and ISA bus slot.
- The POST code display is made up of a dual, dot matrix hexadecimal read-out that display's Power On Self Test (POST) status codes..
- Self checking remote display function. Dual POST code display - User can readout the POST at PCB component and solder side. It is easy to view the POST code when user plugs the POST card in computer system. Recall previous post codes at the touch of a button.
Multifunction Card Reader, 5.25 inch Media Dashboard, with USB3.0/2.0 Hub, eSATA, 4 pin Power Port, Audio, Supports M2/TF/SD/MS/CF, Multi Card Reader
- 【Support Systems】Support for Windows 2000/XP/Vista and Win7/8.
- 【Cable Connected with Mainboard】20PIN 3.0 cable*1, big 4 PIN cable*1, DuPont USB2.0 cable*1, SATA data cable*2, audio cable*1..
- 【High Quality】The front panel media dashboard is made of ABS material and etched on surface. It is stable with high speed and safety..
- 【Transfer Speed】USB 3.0 port transfer speed up to 5Gbps.
- USB2.0 port transfer speed up to 480Mbps. ESATA port has high transfer speed, improving work efficiency..
- 【Multi Port】All-in-1 Card Reader, supports M2/TF/SD/MMC/MS/CF(Support up to 64G memory card). It has build-in USB 3.0 Port, USB 2.0 port, e-SATA, SATA port, 4 pin Power port, Audio, Multi Card Reader, which can command your needs..
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board
- Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
- Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
- Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
- Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
- This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Creality Ender 5 Pro Creative FDM 3D Printer Upgrade Silent Mainboard Metal Extruder Frame with Capricorn Bowden PTFE Tubing 220x220x300mm for Adult Designer Home and School Use
- 【Creality Ender 5 Pro 3D Printer 】With three upgrade Features, V1.1.5 Silent Mainboard, Metal Extruder Frame, Premium PTFE Tube. Solid cube frame....
- 【V1.1.5 Silent Mainboard】Ender 5 Pro Upgrade Motherboard CV1.1.5 Silent Mainboard with TMC2208 Driver, Marlin 1.1.8 and Bootloader installed,....
- 【Metal Extruder Frame】The metal extruder have better stronger pressure to pushing filament into printer nozzle, and longer lasting heat, will not....
- 【Premium PTFE Tube】Upgrade Capricorn Bowden PTFE Tubing, High Temperature Resistance-Heat, good flexibility, abrasion resistance, chemical....
- 【Printing Support】With 1 year warranty, good customer service, if you have any question , please feel free to contact us, we will reply to you as....
Cooler Master High Performance Thermal Paste - (HTK-002-U1) AND Cooler Master Hyper 212 Evo CPU Cooler with PWM Fan, Four Direct Contact Heat Pipes
- Suitable for CPU, chipsets on Mainboard, VGA card, etc..
- Well-balanced cooling performance provides fin optimizations with perfect balance between high and low speed operations.
- 4 Direct Contact heat pipes with the patented CDC(Continuous Direct Contact) technology - creating a perfect, sleek surface for heat conduction,Fan Rated Voltage:12V DC,Fan Noise Level:9 - 36 dBA.
EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header
- Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
- In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
- There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
- Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
- If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..